Victor V-9B Operating Instructions Manual

V-9B Battery Tub Vacuum
Operating Instructions

Dowding & Plummer Ltd.
Calthorpe House
Stockeld Road
Birmingham B27 6AP
Tel: [phone]
Fax: [phone]
email: sales@victoroorcare.com
www.victoroorcare.com

Technical Data

Product Code V-9B

Voltage (V) 24

Motor Power Rating (Watts) 400

Airow (l/s) 34

Waterlift (mm) 1100

Weight with Batteries (kg) 8.4

Noise Level (dBA) <50

Dimensions (L x W x H) (mm) 400x345x435

Capacity (Litres) 9

Charge Time (Min) 210 approx

Runtime (Min) 65 approx

Specication

Basic Operation

Connecting the Hose

Insert the hose end into the tub and
twist to secure.

Connecting the Battery

Insert the connector from the
powerhead into the connector on
the battery case and click together.

Switching the Machine On and O

To turn the machine on, make sure the
battery is connected and press the switch
to the 1 position. To stop the machine
press the switch to the O position.

Charging the Battery

Make sure that the machine is
switched o and the power head is
disconnected from the battery, by
pulling out the connector.

Connect the charger to the battery
by pushing the charger plug into the
socket on the machine. Make sure that
it clicks into place securely.

When the charger is connected to the machine you can plug the charger into the
mains socket and turn the power on.

The charger will display two red
lights which show that the battery is
charging. During the nal phase of
charging one of the lights with ash
green. Charging is complete when the
light is solid green.

It is important to remember to turn
the power o at the mains socket and
remove the plug from the mains socket
before removing the charger plug
from the machine.

Charging Charged

Ready for Use

Changing the Bag

To change the bag, rstly unplug the
powerhead from the battery.

Unclip the powerhead from the tub
and lift o.

Lift out the lter. You will now be able
to see the bag. Remove the bag and
close the cardboard ap to prevent
dust and dirt escaping. Dispose of the
bag in your designated disposal area.

Take a fresh bag a push it over the
inlet, make sure that the bag is tted
securely. Replace the lter and the
powerhead. You can then connect
the powerhead to the battery and
continue cleaning.