Vicoustic Flexi Glue User manual

FLEXI GLUE

ACESSORIES Line

P

RODUCT INFORMATION

FLEXIGLUE

Assembly adhesive for bonding rigid PVC, wood, chip board and gypsum plaster board.
Usable for fixing panels or strips out of wood or plastic. Suitable for expanded plastic slabs or
insulating plates out of glas- or mineralfiber as well as for polystrene foams (Styrofoam). Not
recommended for soft PVC.

Technical Data

Base

Styrene caoutchouc, containing solvent, toluene-free

Colour

Beige

Density

1,15

g/cm3DIN 53479, bei 23ºC

Consistency

pasty

Slump

4mmaccording ASTM

Solid content

75

%

Shear strenght

0,25

N/mm

2

after 3 days; PVC/PVC

Open time

1

min

Preparation The surfaces to be bonded must be dry, clean and free of dust and grease.The surfaces to be bonded must be dry, clean and free of dust and grease.

Bonding

Apply the adhesive evenly with hand or pressure guns on the surfaces to
be bonded. Join them immediatlly. The layer thickness depends on the
consistency of the materials to be bonded. Unilateral application is
possible. In this case, join the parts before formation of a skin on the
surface of the adhesive layer. Press well. Make sure that both surfaces are
well wetted.

Apply the adhesive evenly with hand or pressure guns on the surfaces to
be bonded. Join them immediatlly. The layer thickness depends on the
consistency of the materials to be bonded. Unilateral application is
possible. In this case, join the parts before formation of a skin on the
surface of the adhesive layer. Press well. Make sure that both surfaces are
well wetted.

Page 1/2

Ref.V00131
EAN13 - 5600217588398

Box - 21 x 16 x 24 cm
Weight - 4.5 Kg
Each Strip-1x1000cm ; 5mm(Thickness)
Units per box - 1

FEATURES Flexi Glue

Vicoustic’s Flexi Glue is designed for use with a variety of materials. Its chemical composition is non aggressive, and therefore certified in

accordance with the most recent European legislation, allowing Flexi Glue to be used in any environment. Flexi Glue is also perfect for use

with polyurethane (foam) or polystyrene (EPS) Vicoustic solutions, ensuring their correct and safe application to a room’s surfaces.

Flexi Glue was designed in collaboration with leading chemical industry professionals. Testing has revealed excellent strength and versatility

when applied to a range of materials.

TECHNICAL DATA Flexi Glue

PROCESSING Flexi Glue

Preparation: The surfaces to be bonded must be dry, clean and free of dust and grease.

Bonding: Apply the adhesive evenly with hand or pressure guns on the surfaces to be bonded. Join them immediately. The layer thickness

depends on the consistency of the materials to be bonded. Unilateral application is possible. In this case, join the parts before formation of a

skin on the surface of the adhesive layer. Press well. Make sure that both surfaces are well wetted.

VICOUSTIC – Visound Acústica Lda – R. Quinta do Bom Retiro Nº 16 Armazém 9 – 2820-690 Charneca da Caparica – Portugal

VAT PT505700034 Tel [phone] Fax [phone] – Email [e-mail] - We b www.vicoustic.com