VICOR VI-B61-IU-BM, VI-B61-EU-BM, VI-B61-CU-BM, VI-B54-MU-BM, VI-B54-EU-BM Datasheet
...
12
1-800-735-6200
Typical Model:
VI-261-EU-BM
Input: 300Vdc
Output: 12Vdc at 200W
1. Available in 300V input only.
Packaging Options:
SlimMod™, high power density, flangeless packages and FinMods™, featuring integral
finned heatsinks.
SlimMod: Add the suffix -S to the end of the BatMod part number.
FinMods: Add the suffix -F1 for .25"H Longitudinal Fin; F2 for .5"H Longitudinal Fin
-F3 for .25"H Transverse Fin; F4 for .5"H Transverse Fin
BatMod Specifications
(typical TBP= 25°C, nominal line, 75% load, unless otherwise specified)
Parameter Remarks
Nominal Input Voltage 48Vdc, 150Vdc, 42-60V, 100-200V,
300Vdc 200-400V
Output Current 0-14.5A 12V battery system
(Refer to Safe Operating 0-7.25A 24V battery system
Curves below) 0-3.6A 48V battery system
Current Control Input 1V to 5V Zero to max. current
Current Monitor Output 1V to 5V Zero to full load
Voltage Control Input 0V to 2.5V Zero to FS output
Output Voltage Setpoint 15V, 30V, 60V +/-1% 12V, 24V, 48V
Trimmable +10%, -25% Output Respectively
Dynamic Characteristics V Mode: 300 µsec typ. V
NOM
for 50-100%
I Mode: 250 µsec typ. load changes
Operating Temp./Storage Temp.
-10°C to +85°C, -20°C to +100°C E-Grade
-25°C to +85°C, -40°C to +100°C C-Grade
-40°C to +85°C, -55°C to +100°C I-Grade
-55°C to +85°C, -65°C to +100°C M-Grade
Dielectric Withstand
Input to Output 3,000V
RMS
Output to Baseplate 500V
RMS
Input to Baseplate 1,500V
RMS
Features
■ Programmable Output Current
■ Booster Versions Available
■ Size: 4.6" x 2.4" x 0.5"
(116,8 x 61,0 x 12,7)
■ UL, CSA, TÜV
■ Compatible with All Major
Battery Types
■ Inputs: 48, 150, 300Vdc
■ Outputs: 12, 24, 48Vdc Nom.
■ Analog Current Monitor
■ Analog Overvoltage Adjust
■ CE Marked
BatMod™
Battery Charger
Current Source Modules
Product Highlights
The BatMod combines Vicor’s industry
standard package with the flexibility of
a power converter whose output voltage
and output current may be independently
set. BatMod’s allow the user to
independently program a constant output
current and a maximum float voltage.
The float voltage is the point at which
the BatMod transitions from constant
current to constant voltage. These
features make the BatMod an ideal
candidate for battery charging and other
applications which require a controlled
current source.
The BatMod is also available in booster
versions that enable the designer to
create systems capable of multiple
kilowatts of output power.
With its wide range of input options, the
BatMod is compatible with all major
battery types. This new current output
module finds application in systems
where easily programmable current is of
primary importance.
Consult factory for availability of
input/output voltage ranges not shown.
Module
2 = Driver
B = Booster
Part Numbering
Input Voltage
Nominal Range
3 = 48V 42 - 60V
5 = 150V 100 -200V
6 = 300V 200 -400V
Product Grade
E = -10°C to +85°C
C = -25°C to +85°C
I = -40°C to +85°C
M = -55°C to +85°C
Output Voltage
Nominal Range
1 = 12V (11.25-16.5V)
3 = 24V1(22.5-33.0V)
4 = 48V (45.0-66.0V)
2
4
6
8
10
12
14
16
246
8
10 12
14
16
Safe Operating Area
High Program
Exceeded
Amps
Volts
4
8
12
16
20
24
28
32
123
4
56
7
8
Safe Operating Area
High Program
Exceeded
Amps
Volts
8
16
24
32
40
48
56
64
0.511.5
2
2.5 3
3.5
4
Safe Operating Area
High Program
Exceeded
Current
Exceeded
Amps
Volts
36
72
18
12V Battery System
24V Battery System
48V Battery System
13.8V
27.6V
55.2V
Power
Exceeded
Power
Exceeded
Power
Exceeded
16.5V
14.5A
33.0V
7.25A
3.6A
66.0V
11.25V
22.5V
45.0V
6.9V*
13.8V*
27.6V*
*Maximum recommended battery discharge.
Maximum
Voltage
Setpoint
Minimum
Voltage
Setpoint
Minimum
Operating
Voltage
Current
Exceeded
Maximum
Voltage
Setpoint
Minimum
Voltage
Setpoint
Minimum
Operating
Voltage
Current
Exceeded
Maximum
Voltage
Setpoint
Minimum
Voltage
Setpoint
Minimum
Operating
Voltage
Safe Operating Conditions
12
1-800-735-6200
BatMod
DC Input
Gate In
Gate Out
+Out
–Out
+In
–In
External
Control
Functions
+
–
12-48V
Battery
TRIM
V
TRIM
I
MON
I
DC Input
BatMod
Gate In
Gate Out
+Out
–Out
+In
–In
External
Control
Functions
+
–
Load
TRIM
V
TRIM
I
MON
I
+.030 (0,76)
-.000
Product ID
this surface
FULL R
5
6
7
8
9
4
3
2
1
Pin #
1
2
3
4
5
6*
7*
8*
9
Function
+In
Gate In
Gate Out
-In
+Out
V
TRIM
ITRIM
IMON
-Out
* Do not connect on
Booster modules
Aluminum Base
.01
.040 (1,0) Dia (7) places
Solder plate
over copper alloy
.080 (2,0) Dia (2) places
Solder plate
over copper alloy
.30 (7,6)
±.015 (0,38)
1.80
(45,7)
4.20 (106,7)
.50 (12,7)
.22 (5,6) MIN
.12 (3,0)
4.60 (116,8)
2.40 (61,0)
1.75 (44,5)
.30 (7,6)
Min
.15
(3,8)
2.10
(53,3)
.40
(10,2)
.35 (8,9)
±.015 (0,38)
1.40
(35,6)
1.00
(25,4)
.70
(17,8)
3.60 (91,4)
.50
(12,7)
.15
(3,8)
BatMod
Typical Applications
Mechanical Diagram
DC Input Battery Charger
DC Input Programmable Current Source
Loading...