VICOR VI-200 DATA SHEET

12

1-800-735-6200

70

Product Grade/ Product Grade/

Operating Temp. Storage Temp.

E = -10°C to +85°C E = -20°C to +100°C
C = -25°C to +85°C C = -40°C to +100°C
I = -40°C to +85°C I = -55°C to +100°C
M = -55°C to +85°C M = -65°C to +100°C

Overtemperature shutdown 95°C typical

(recycle power to restart).

Converter Selection Chart

VI-2

Mechanical Drawing

Features

■ Up to 50W/Cubic Inch

■ UL, CSA, TÜV, VDE, BABT,

AUSTEL

■ Up to 90% Efficiency

■ Size: 4.6" x 2.4" x 0.5"

(116,8 x 61,0 x 12,7)

■ Remote Sense and Current Limit

■ OVP, Thermal Shutdown

■ Logic Disable

■ Wide Range Output Adjust

■ Compatible Power Booster Modules

■ ZCS Power Architecture

■ Low Noise FM Control

■ CE Marked

VI-200

DC-DC Converters
50 to 200 Watts

Product Highlights

The VI-200 Family, with over 8 million
shipped, is Vicor’s first generation of
“zero-current-switching” component-level
DC-DC converters.

Operating at frequencies up to 2 MHz,
VI-200 Family Converters offer
exceptional power density, efficiency,
noise performance, reliability and ease of
use. Power Boosters provide a simple, cost
effective, off-the-shelf solution for higher
power output requirements. One or more
boosters may be used to create synchronous
arrays capable of supplying several
kilowatts of output power.

The flexibility of Vicor’s power components
is also available in half-size, half-power
VI-J00 MiniMods. (pg. 72)

Packaging Options

SlimMods™, high power density,
flangeless packages and FinMods™,
featuring integral finned heatsinks.

SlimMod: Option suffix: - S
Example: VI - 2XX - XX- S
FinMod: Option suffix: - F1 and - F2

Examples:
VI - 2XX - XX -F1, 0.75" height
VI - 2XX - XX -F2, 1.00" height

Max. Output For 5V Outputs > 5V Outputs < 5V Outputs

(1) 75W 75W 15A
(2) 150W 150W 30A
(3) 100W 100W 20A

* Brownout 75% of rated load; transient voltage for 1 second.

Max. Output For 5V Outputs > 5V Outputs < 5V Outputs

(4) 200W 200W 40A
(5) 150W 200W 40A
(6) 75W 100W 20A

Output Power/Current

V

OUT

≥ 5V V

OUT

< 5V

Y = 50W Y = 10A
X = 75W X = 15A

W = 100W W = 20A

V = 150W V = 30A
U = 200W U = 40A

For additional output power use “Boosters”.

Change (VI-2xx-xx) to (VI-Bxx-xx).

Output Voltage

Z = 2V 2 = 15V
Y = 3.3V N = 18.5V
0 = 5V 3 = 24V
X = 5.2V L = 28V
W= 5.5V J = 36V
V = 5.8V K = 40V
T = 6.5V 4 = 48V
R = 7.5V H = 52V
M = 10V F = 72V
1 = 12V D = 85V
P = 13.8V B = 95V

Input Voltage

Nominal Range Brownout

/

Transient

*

0 = 12V 10 - 20V (1) n/a 22V
1 = 24V 21 - 32V (4) 18V 36V

W = 24V 18 - 36V (2) n/a n/a

2 = 36V 21 - 56V (3) 18V 60V
3 = 48V 42 - 60V (4) 36V 72V
N = 48V 36 - 76V (4) n/a n/a
4 = 72V 55 - 100V (4) 45V 110V
T = 110V 66 - 160V (2) n/a n/a
5 = 150V 100 - 200V (5) 85V 215V
6 = 300V 200 - 400V (4) 170V 425V
7 = 150/300V 100 - 375V (6) 90V n/a

+.030 (0,76)

-.000 (0)

Product ID
this surface

FULL R

5

6

7

8

9

4
3

2

1

Pin #

1
2
3
4
5
6*
7*
8*
9

Function

+In

Gate In
Gate Out

-In
+Out

+Sense
Trim

-Sense

-Out

* Do not connect on
Booster modules

Aluminum Base

.01

.040 (1,0) Dia (7) places
Solder plate
over copper alloy

.080 (2,0) Dia (2) places
Solder plate
over copper alloy

.30±.015

(7,6)±(0,38)

1.80

(45,7)

(106,7)

(12,7)

(5,6) MIN

(3,0)

(116,8)

(61,0)

(44,5)

(7,6) Min

.15

(3,8)

2.10

(53,3)

.40

(10,2)

.35±.015

(8,9)±(0,38)

1.40

(35,6)

1.00

(25,4)

.70

(17,8)

(91,4)

.50

(12,7)

VI-200

4.60

3.60

.15

(3,8)

4.20

.12

.22

.50

.30

2.40

1.75

Rev 3 1 of 2

For the latest Vicor Product Information: www.vicorpower.com

12

1-800-735-6200

71

VI-200 E-Grade VI-200 C-, I-, M-Grade

PARAMETER MIN. TYP. MAX. MIN. TYP. MAX. UNITS TEST CONDITIONS

■ Input Characteristics

Inrush charge 120x10

-6

120x10-6200x10

-6

Coulombs Nominal line

Input reflected ripple current – pp 10% 10% I

IN

Nominal line, full load

Input ripple rejection dB 120 Hz, nominal line

dB 2400 Hz, nominal line

No load power dissipation 1.35 2 1.35 2 Watts

■ Output Characteristics

Setpoint accuracy 1% 2% 0.5% 1% V

NOM

Load/line regulation 0.5% 0.05% 0.2% V

NOM

LL to HL, 10% to Full Load

Load/line regulation 1% 0.2% 0.5% V

NOM

LL to HL, No Load to 10%
Output temperature drift 0.02 0.01 0.02 % / °C Over rated temp.
Long term drift 0.02 0.02 %/1K hours
Output ripple - pp:

2V, 3.3V 150 mV 60 mV 100 mV 20 MHz bandwidth
5V 5% 2% 3% 20 MHz bandwidth
10-48V 3% 0.75% 1.5% 20 MHz bandwidth

Trim range

1

50% 110% 50% 110%
Total remote sense compensation 0.5 0.5 Volts 0.25V max. neg. leg
OVP set point 125%

2

115% 125%2135% V

NOM

Recycle power

Current limit 105% 135% 105% 125% I

NOM

Automatic restart

Short circuit current

3

20% 140% 20% 130% I

NOM

■ Control Pin Characteristics

Gate out impedance 50 50 Ohms
Gate in impedance 10

3

10

3

Ohms
Gate in open circuit voltage 6 6 Volts Use open collector
Gate in low threshold 0.65 0.65 Volts
Gate in low current 6 6 mA
Power sharing accuracy 0.95 1.05 0.95 1.05

■ Dielectric Withstand Characteristics

Input to output 3,000 3,000 V

RMS

Baseplate earthed

Output to baseplate 500 500 V

RMS

Input to baseplate 1,500 1,500 V

RMS

■ Thermal Characteristics

Efficiency 78-88% 80-90%
Baseplate to sink 0.2 0.2 °C/Watt With Vicor P/N 01777

Thermal shutdown

4

90 95 105 90 95 105 °C Cool and recycle power

(Drivers only)

to restart

■ Mechanical Specifications

Weight 6.0 (170) 6.0 (170) Ounces (Grams)

1

10V, 12V and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.

2

131% nominal for booster modules.

3

Output voltages of 3.3V or 5V incorporate foldback current limiting; all other outputs provide constant current limiting.

4

No overtemp protection in booster modules.

Converter Specifications

(typical at TBP= 25°C, nominal line and 75% load, unless otherwise specified)

25+20Log

(

Vin

)

Vout

30+20Log

(

Vin

)

Vout

20+20Log

(

Vin

)

Vout

Rev 3 2 of 2

For the latest Vicor Product Information: www.vicorpower.com