VICOR M-FIAM3M21, M-FIAM3M13, M-FIAM3M11, M-FIAM3HS2, M-FIAM3HS1 Datasheet

Vicor Corp. Tel: [phone] Fax: [phone] MFIAM3 Rev. 1.5 Page 1 of 4

Set your site on VICOR at www.vicorpower.com

Parameter Min Typ Max Remarks

Input voltage 180Vdc 270Vdc 375Vdc Continuous
Output current 3A
Inrush limiting 0.018A/µF
Transient immunity Exceeds limits of MIL-STD-704E
EMI:MIL-STD-461E

Conducted emissions: CE101, CE102
Conducted susceptibility: CS101, CS114, CS115, CS116

Dielectric withstand 1,500Vrms Input/Output to base

2,121Vdc Input/Output to base
Efficiency 96% 98%
Internal voltage drop 3.0Vdc 5.0Vdc @ 3A, 100°C baseplate
ON/OFF control

Enable (ON) 0.0Vdc 1.0Vdc Referenced to –Vout.
Disable (OFF) 3.5Vdc 5.0Vdc 100kΩ internal pull-up resistor

External capacitance See illustration C1 on page 3.

10µF 22µF 400V
Weight 3.1 (88) 4 (113) Ounces (grams)
Warranty 2 Years

Parameter Rating Unit Notes

+In to –In 375 Vdc Continuous
+In to –In 400 Vdc 100ms
Mounting torque 5 (0.57) in-lbs 6 each, #4-40 or M3
Pin Soldering temperature 500 (260) °F (°C) <5 sec; wave solder
Pin Soldering temperature 750 (390) °F (°C) <7 sec; hand solder
Operating temperature H–Grade -40 to +100 °C Baseplate
Storage temperature H–Grade -55 to +125 °C
Operating temperature M–Grade -55 to +100 °C Baseplate
Storage temperature M–Grade -65 to +125 °C

Features

• EMI filtering-MIL-STD-461E

• Transient protection-MIL-STD-704E

• Environments-MIL-STD-810, MIL-STD-202

• Environmental stress screening

• Low profile mounting options

• Output current up to 3 Amps

• Mini sized package

• Inrush current limiting

Product Highlights

The M-FIAM3 is a DC front-end module
that provides EMI filtering and transient
protection required in military applications.
The M-FIAM3 enables designers using
Vicor 2nd Generation 300V DC-DC converters
to meet conducted emission/conducted
susceptibility per MIL-STD-461E; and
input transients per MIL-STD-704E. The
M-FIAM3 accepts an input voltage of
180-375Vdc and delivers output current
up to 3 Amps.

M-FIAM3 is housed in an industry
standard "half brick" module measuring

2.28" x 2.2" x 0.5" and depending upon
model selected, may be mounted on-board
or in-board for height critical applications.

Compatible Products

• 2nd Generation 300V Input
DC-DC converters

Part Number Format

*Compatible with SurfMate and InMate socketing systems.

Thermal Resistance

Parameter Typ

Baseplate to sink; flat, greased surface 0.16°C/Watt
Baseplate to sink; thermal pad (P/N 20264) 0.1°C/Watt
Baseplate to ambient 7.9°C/Watt
Baseplate to sink; 1000 LFM 2.2°C/Watt

M-FIAM3

Military 270Vin Filter
Input Attenuator Module

45

Shown actual size:

2.28 x 2.2 x 0.5 in

57,9 x 55,9 x 12,7 mm

Specifications

(typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified)

Absolute Maximum Rating

M-FIAM3 M 2 1

Product

Baseplate
1 = Slotted
2 = Threaded
3 = Thru-hole

Pin Style
1 = Short
2 = Long

*S=Short ModuMate
*N=Long ModuMate

Product Grade(°C)

H = –40 to +100
M = –55 to +100

Temp. Environment MTBF Unit

25°C Ground benign:G.B. 3,505,003 Hrs
50°C Naval sheltered:N.S. 841,200 Hrs

65°C Airborne inhabited cargo:A.I.C. 683,475 Hrs

MTBF per MIL-HDBK-217F

Vicor Corp. Tel: [phone] Fax: [phone] MFIAM3 Rev. 1.5 Page 2 of 4

Set your site on VICOR at www.vicorpower.com

Transient Immunity

Inrush Limiting

Figure 2 – Transient Immunity: M-FIAM3 output response to
an input transient.

Figure 3– Inrush Limiting: Inrush current with 22µF external
capacitance.

Environmental Qualification

Altitude

MIL-STD-810C, Method 500.2, Procedure I & II, 40,000 ft. and
70,000 ft. Operational.

Explosive Atmosphere

MIL-STD-810F, Method 511.4, Procedure I, Operational.

Vibration

MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine
and Random vibration per Table 514.5C for Helicopter AH-6J
Main Rotor with overall level of 5.6 grams for 4 hours per axis.
MIL-STD-810F, Method 514.5C, General Minimum Integrity
Curve per Figure 514.5C-17 with overall level of 7.7 grams
for 1 hour per axis.

Shock

MIL-STD-810-F, Method 516.5, Procedure I, Functional Shock,40 G's.
MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft.
MIL-STD-202F, Method 213B, 60 G's, 9ms half sine.
MIL-STD-202F, Method 213B, 75 G's, 11ms Saw Tooth Shock.

Acceleration

MIL-STD-810F, Method 513.5, Procedure II, table 513.5-II,
Operational, 2-7 G's, 6 directions.

Humidity

MIL-STD-810F, Method 507.4, Procedure I, Cycle I, 240 hrs, 95% RH.

Solder Test

MIL-STD-202F, Method 208, 8 hour aging.

H Grade M Grade

Operating Temp. -40°C to +100°C -55°C to +100°C
Storage Temp. -55°C to +125°C -65°C to +125°C

Temp. Cycling:*

12 cycles 12 cycles

-65°C to +100°C -65°C to +100°C
Ambient Test
@ 25°C

Yes Yes

Power Cycling 12 hours, 24 hours,
Burn-In: 28 cycles 56 cycles
Functional and
Parametric

-40°C and -55°C and

ATE Tests:

+100°C +100°C

Hi-Pot Test Yes Yes
Visual Inspection: Yes Yes
Test Data vicorpower.com vicorpower.com

Environmental Stress Screening

Conducted Noise

Figure 1– M-FIAM3 and Model V300A48M500AL
DC-DC converter operating at 180Vdc, 130W.

Output

Input

*Temperature cycled with power off, 17°C per minute rate of change.