Vicon Security V670-HT202VK Instruction Manual

Heater assembly for Color and Day / Night domes

General

Contents of Package

Installation

INSTRUCTION MANUAL

Thank you for choosing the heater assembly for 3-Axis Vandal resistant domes.
Before attempting to connect or operate this product, please read and follow these instructions.

This heater assembly is designed to provide heat to the new 3-Axis Vandal resistant domes.
The manual is designed to assist in the fitting of the heater assembly.

1. Heater PCB

2. Heater

3. User Manual

4. Screw

1. Remove support bracket

2. Remove cable tie of the heater power cable

3. Remove OSD Control PCB

Specification

4. Install Heater & Heater + OSD Control PCB

5. Fasten support bracket

Power source

Power supply 24VAC/12VDC

Power consumption

Power consumption 20W Max

Operating Temperature
Heater ON : at 41℉(5℃)

Heater OFF : at 59℉(15℃)

50304449A