Vicom VIR-30BL-4N1-2MP User Manual

BRIEF OF PRODUCT

CONNECTING

INTRODUCTION

Sensor

Using high-performance image sensor, with millions
of pixels resolution.

* Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.

* Auto Electronic Shutter (AES)

Built-in auto electronic shutter function.

* Gamma Characteristic
Camera Gamma characteristic is 0.45.

* Scanning Mode
NTSC or PAL mode.

* Night-time Vision
0 Lux with IR LED ON. Adopt TaiWan high quality IR

LED, having very good night-vision effect.

Notes：

●The power supply must through safe attestation. Its output voltage、

current、voltage polarity and operating temperature must match the
camera’s requirement.

●When using the camera in the thunderbolt condition,please note to
mount Anti-thunder device or put off the power supply plug and cable .

●In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.

Monitor

DVR

Video

camera

12V DC

DC12V Power Supply

Link wire rule：

Video

Power

TROUBLE AND SOLUTION

1. No Picture after providing power

. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.

. Please check all the connecting cable and monitors whether be connected
correctly or not.

2. The picture level direction have flowing interference ripples

. May be caused by the power supply AC ripples, it need filter the wave of the

power supply.
. Check the monitor and peripheral equipments used.

3. The picture background color changes continuously

. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.

4. The picture smear too mass

. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.

Congratulations on your purchase of this product..

This User Guide suits camera series product. We

adopt the latest technical of sensor and driver. The most
attractive characteristics are night-time vision and van­dalproof, and widely applicable to day & night, indoor &
outdoor. In addition, it owns the characters of high defini­tion and stability, strong anti-jamming, rich and real color.
Fixing and using this model are convenient too. It is very
good for you to apply to yours CCTV system.

Please read this instruction manual carefully to en-

sure proper use of the product.

To prevent fire or shock hazarded. Do not expose the unit

to rain or moisture.

The symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.

The symbol is intended to alert the user to the presence of

uninsulated ‘dangerous voltage’ within the product’s

enclosure that may be of sufficient Magnitude to consti­a risk of electric shock to persons.

CAUTION:

RISK OF ELECTRIC. DO NOT OPEN

SHOCK
DO NOT REMOVE COVER OR BANCK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING

CAUTION:
To prevent electric shocks and risk of fire hazards,
do NOT use other than specified power source.

Note:

● Please note the camera’s operating temperature and its using

● Never make the camera face the sun or bright object. Other-

● Do not mount the camera near by the radiator or heater.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

environment requirement. Avoid using the camera at too high

or too low temperatures. The operating temperature is -10℃-
50℃. (Recommendatory operating temperature is -5℃--40℃.)

wise, it will damage the CCD.

Specification

Model

Pick Up Element

Effective Picture

Elements ( H*V )

Horizontal Resolution

S/N Ratio

Minimum Illumination

Auto Electronic Shutter

Auto Gain Control

White balance

Day and night conver-

sion

IR Project Distance

IR Status

IR Power On

Video Output

Power/Current

Lens

Dimension (mm)

Weight (g)

Storage Temperature

Operating Temperature

VIR-30BL-4N1-2MP

1/2.9” CMOS sensor

1920*1080

1080P

48dB(min)(AGC closed)

0 Lux (with IR LED ON)

1/60s-1/10000s

Auto

Auto

ICR mechanical switch

20M

Under 10 Lux by CDS

CDS Auto Control

C/A/T/CVBS

12VDC (+/-10%)/ 210mA

3.6mm

150(L)×65(W)×65(H)

330

-30~ +60℃

-10~ +45℃

VIR-30BL-4N1-2MP

Series Color Camera

IR Waterproof Camera

Packing List

No Name Number

1. camera 1

2. User Guide 1

Franchiser：

Notes:Before providing power for the

camera, please read this User Guide in
detail!

Do not attempt to disassemble the camera.
If the camera can not work, please contact
local franchiser or our company.