VIBRATO NS 160, NS 380 Owner's Manual

Owner’s Manual

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Do not use this apparatus near water.

4. Avoid spilling any liquid,water into this apparatus , clean only with dry cloth.

5.Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

6.Do not install near any heat sources such as radiators, heat registers, stoves

or other apparatus that produce heat.

7. Only use voltage and AC specified with proper socket.

8. Shield the cables and cords in case of electric leakage.

9. Only use attachments and accessories specified by the manufacturer.

10. Be careful when moving this apparatus.

11. Unplug this apparatus during lightning storms or when unused for long

periods of time.

12. When this apparatus needs repair please contact the dealer. Do not open

this apparatus without authorization, or else all losses caused will be at your

own risk.

13.Ventilation should not be impeded by covering the ventilation openings with

items such as newspapers, tablecloths, curtains and so on.

14.No naked flame sources, such as candles, should be placed on the

apparatus.

15.This product must be terminated with a three-conductor AC mains power

cord that includes an earth ground connection.

Warning !

To reduce the risk of fire or electric shock, do not expose this apparatus to rain

or moisture. The apparatus shall not be exposed to dripping or splashing.

Unpack and Place

Transport/Unpack

• This apparatus is a heavyweight

machine. More than one persons are

recommended to remove the device

in case of unexpected physical hurt.

Unpack：

• Remove the top bubble shield.

Two people on both sides lift the

machine vertically and place it on a

stable platform.

• check the machine if there is any

scratch during the transport. If there

is please contact your Vibrato

TM

dealer at your earliest convenience.

• Find the included suitcase in the

package and make sure all the

following items are included:

1 Power amp

1 three-conductor mains cable for

NS 160, and 2 for NS 380.

If anything is missing, please contact

your VibratoTMdealer at your earliest

convenience.

Place and Ventilation

• If you want place this apparatus on

a rack, please make sure that it is

ventilated well.

• Please make sure the apparatus is

installed on a stable, level platform.

• This apparatus is suggested to

place near the other audio

components to shorten the cable as

much as possible.

• This apparatus should be placed

where is dry, ventilated without direct

sunshine exposure.

• Do not block the ventilation

openings with anything.

• Do not place the apparatus where

is hot, moist,steamed and smoggy.

• This apparatus is not water-proof.

Avoid any liquid spilling into the

machine in case of electric shock.

Power and Warranty

Power Requirements

In the factory configuration, NS

160/NS380 are fit for 50Hz/220v

alternative power. Please make sure

that the voltage shown on the power

label of the AC input connector on

the back panel is consistent with the

supply voltage before using.

If the connected AC voltage is not

consistent, it may cause danger of

fire or safety problems, and

damage to the device. If you have

any question about the voltage

requirements or the regional voltage,

please consult the local authorized

dealer before connecting to the

mains.

warning： please make sure that all

the components of your audio

system have stable connection to

earth. Please do not use the “earth

disconnector”, for it damages the

safety plug or grounding plug.

Otherwise dangerous voltage will

generate between components and

may cause damage.

Note：NS 160/NS380 are capable of

producing breathtaking sound at a high

power. But your power supply may be a

marring factor for the sound due to your

listening habits or the number of

speakers and amplifiers in you audio

system. In this case, you may install a

dedicated AC circuit. If you have

multiple AC circuits for power supply,

please consult a qualified electrician to

ensure all components operate with the

same, stable and low-impedance

earthing reference. Unplug Model One

from the AC wall outlet during a

lightning storm or when not in use for an

extended period of time.

Warning: Before moving the device,

please remove the plug from the AC

power outlet and unplug the power

cord from the back panel to ensure

that the device is powered off.

Warranty Service

•

Please send the warranty card to

the following address within 15 days

after your purchase：Room 1103,

Building 1,phase 6, Tian’an Nanhai

Cyber Park, Jianping Road,

Guicheng Street, Nanhai District,

Foshan City, Guangdong Province,

China. Zip code: 528200

•

Please keep your receipt marked