Technical Data Sheet
Vibra-Tite® 910
Epoxy
November 2012
Product Description
Epoxy VIBRA-TITE 910 A&B is a fast setting, nonsagging, thixotropic, industrial grade epoxy adhesive.
Used to bond metal, ceramic, wood and vertical
surfaces where gap-filling is needed.
Features and Benefits
Easy mix Ratio
Excellent chemical resistance
Cures without shrinking
Non-sagging
Produces strong, rigid bond on metal,
ceramics, wood, concrete, glass, or
combinations
Casting can survive harsh chemical
exposure
Properties of Uncured Material (resin)
Chemical Type Epoxy
Appearance Black
Specific Gravity 1.1 to 1.3
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cP Thixotropic Paste
Flash Point (TCC), °C(°F) >93(>200)
Properties of Uncured Material
(hardener)
Chemical Type Mercaptan
Appearance White
Specific Gravity 1.0 to 1.2
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cP Thixotropic Paste
Flash Point (TCC), °C(°F) >93(>200)
Properties of Cured Material
Vo. Mix Ratio, Resin: Hardener 1 to 1
Wt. Mix Ratio, Resin: Hardener 100:92
Viscosity @ 25ºC, cP Non-sagging paste
Workl Time, 100g (25ºC) 3 mins
Tack Free Time (25ºC) 3 to 4 min.
Functional Cure (25ºC) 2 hrs.
Full cure (25 ºC) 12 hrs
Hardness @ 25ºC , Shore D 85
Performance Properties
(Substrates cured or 5 days @ 22°C)
Gel time 2 to 6 minutes
Shore Hardness, D 80
Adhesive Lap Shear
CRS 1,600 psi
Aluminum 1,200 psi
% Solids by Volume 100%
General Information
Storage
Product should be stored in cool, dry conditions.
VIBRA-TITE 910 A&B when un-mixed has a shelf
life of 12 months when stored at 25°C. Storage in
cool, clean areas is recommended. Usable shelf life
may vary depending on method of applications and
storage conditions.
Note
The data are furnished for information only and are
believed to be reliable. We cannot assume
responsibility for the results obtained by others over
whose methods we have no control. It is
recommended that the product be tested in the
application for which it is to be used.
ND is a registered trademark of ND Industries, Inc.
Loading...