Page 1
Technical Data Sheet
Vibra-Tite® 905
Epoxy
November 2012
Product Description
Epoxy VIBRA-TITE 905 is a fast setting adhesive
that cures at temperatures as low as 41°F/5°C. For
bonding and repairing small parts
Features and Benefits
Easy mix Ratio
Excellent chemical resistance
Cures without shrinking
Good impact resistance
Produces strong, rigid bond on metal, ceramics,
wood, concrete, glass, or combinations
Casting can survive harsh chemical exposure
Properties of Uncured Material (resin)
Chemical Type Epoxy
Appearance Clear Liquid
Specific Gravity 1.16
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cP 12,000
Flash Point (TCC), °C(°F) >93(>200)
Properties of Uncured Material
(hardener)
Chemical Type: Mercaptan/Amine
Appearance: Light Amber Liquid
Specific Gravity: 1.15
Toxicity: Low
Solids: 100%
Viscosity @ 25ºC, cP: 14,000
Flash Point (TCC), °C(°F): >93(>200)
Properties of Cured Material
Vo. Mix Ratio, Resin: Hardener: 1 to 1
Wt. Mix Ratio, Resin: Hardener: 100:98
Gel Time, 100g (25ºC): 5 mins
Fixture Time (25ºC): 15 min.
Functional Cure (25ºC): 4 hrs.
Full cure (25 ºC): 8 hrs
Hardness @ 25ºC , Shore D: 85
Performance Properties
(Substrates cured or 5 days @ 22°C)
T-Peel: 2-3 pli
Impact Resistance: 7 ft.-lb
Adhesive Lap Shear: 3,900 psi
Tensile Elongation: 1%
% Solids by Volume: 100%
General Information
Storage
Product should be stored in cool, dry conditions.
VIBRA-TITE 905 when un-mixed has a shelf life of
12 months when stored at 25°C. Storage in cool,
clean areas is recommended. Usable shelf life may
vary depending on method of applications and
storage conditions.
Note
The data are furnished for information only and are
believed to be reliable. We cannot assume
responsibility for the results obtained by others over
whose methods we have no control. It is
recommended that the product be tested in the
application for which it is to be used.
ND is a registered trademark of ND Industries, Inc.
Loading...