Page 1
Technical Data Sheet
Shear Strength
>275 psi
ASTM D 412
Elongation at
Break
>300%
ASTM D 12
Hardness Shore A
45-50 (14 day
Cure)
ASTM C-661
Tack Free Time
~60 minutes
ASTM-679
Slump (sag)
Zero Slumping
ASTM C-639
Stain Testing
No Staining
Initial Skin
Formation
20-30 minutes
at 77°F
Low Temp Flex
-75°F
Pass
Weight per gallon
~11.80
Service
Temperature
-75°F to 310°F
Vibra-Tite® 817
Structural Adhesive
November 2016
Product Description
Vibra-Tite 817 is a high performance, multipurpose
structural adhesive/sealant designed for difficult
bonding and sealing applications. It is a moisture
curing sealant developed for industrial uses requiring
elasticity, high immediate green strength and
excellent adhesion. Non-sagging but easy to gun/
apply in field installations.
Vibra-Tite 817 is tough, elastic and waterproof. It
bonds aggressively to steel, aluminum,
ceramics, extruded polystyrene foam , glass,
Polyvinylidene fluoride (PVDF) coated metal,
wood and many plastics. Vibra-Tite 817 is suited
for many applications requiring adhesion to concrete
and other industrial construction surfaces.
Features and Benefits
Solvent and isocyanate-free, No VOC’s
Silicone-free
Good chemical resistance
Can be applied on vertical or overhead surfaces
Will not shrink or crack
Resistant to weathering and degradation
Permanently elastic in a broad temperature range
Non-flammable
Physical Properties
Basic Material Proprietary Polymer
Consistency Paste
Color White is standard
Odor Negligible
Components 1
Type Elastomer, H2O cure
Specific Gravity 1.37 – 1.44
Viscosity @ 75F 1,100,000 cps
Isocyanate Percentage 0%
Shelf Life 12 months in unopened
containers stored
between 60° and 80° F.
Performance Properties
Storage
Product should be stored in a cool and dry location at
temperatures below 40°C. Optimal storage is
22±4°C. Shelf life is 12 months from date of
manufacture when stored at 22±4°C
Note
The data are furnished for information only and
are believed to be reliable. We cannot
assume responsibility for the results obtained by
others over whose methods we have no
control. It is recommended that the product
be tested in the application for which it is to be
used.
ND is a registered trademark of ND Industries, Inc.
Loading...