Technical Data Sheet
Vibra-Tite® 567
Retaining Compound
September 2012
Product Description
ND 567 is a high temperature, high strength,
anaerobic retaining compound designed for metal
cylindrical assembly applications. The product
performs on aluminum, steel, plated, stainless steel,
and special alloy parts. ND 567 exhibits excellent
temperature and solvent resistant.
Typical Applications
Locks shaft and hubs together for gears, bearing,
bushings.
Bonds pins, adaptors, plugs.
Properties of Uncured Material
Chemical Type Anaerobic
Appearance Green
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cP
Brookfield RVT,
Spindle 5 @ 20 rpm 5000 to 10000
Specific Gravity 1.16
Performance of Cured Material
Typical Values
Fixture Time 15-20 min@72oF
Full Cure Time 24 hrs @ 72oF
Temperature Range -60oF to 350oF
(-51oC to 177oC)
Shear Strength
After 24 hour cure
Steel pins and collars >2500 psi
After 24 hr cure, 24 hrs at 177oC, tested at 22 oC
Steel pins and collars >3500 psi
Static shear strength was measured on cylindrical
parts with a 0.002” diametrical clearance.
Environmental and Fluid Resistance
(Shear strength values)
Typical Values
Heat age 105%
Engine oil@ 150oC 98%
Brake fluid @ 150oC 100%
ATF @ 150oC 80%
50/50 water/
ethylene glycol @ 120oC 80%
Water @ 100oC 80%
Gasoline @ 25oC 100%
Diesel fuel @ 25oC 100%
Ethyl Alcohol @25oC 95%
General Information
Storage
Product should be stored in a cool and dry location at
temperatures between 14°F (-10°C) to 86°F (30°C).
Shelf life is 2 years from date of manufacture when
stored at 72±8°F (22±4°C).
Note
The data are furnished for information only and are
believed to be reliable. We cannot assume
responsibility for the results obtained by others over
whose methods we have no control. It is
recommended that the product be tested in the
application for which it is to be used.
Loading...