Vibra-Tite 546 Technical Data

Page 1
Technical Data Sheet
Vibra-Tite® 546
Retaining Compound
September 2012
Product Description
Typical Applications
Locks shaft and hubs together for gears, bearing, bushings. Bonds pins, adaptors, plugs, specially designed to bond ring gears to housings.
Properties of Uncured Material
Chemical Type Anaerobic Appearance Green Toxicity Low Solids 100% Viscosity @ 25ºC, cP Brookfield RVT, Spindle 5 @ 20 rpm 1250 to 2700 Specific Gravity 1.16
Performance of Cured Material
Typical Values Fixture Time 1-5 min @ 72oF Full Cure Time 24 hrs @ 72oF Temperature Range -60oF to 300oF (-51oC to 150oC)
Shear Strength
After 1 hour cure Steel pins and collars >2000 psi After 24 hour cure Steel pins and collars >3000 psi
Static shear strength was measured on cylindrical parts with a 0.002” diametrical clearance.
Environmental and Fluid Resistance
(Shear strength values) Typical Values
Heat age 100% Engine oil@ 150oC 98% Brake fluid @ 150oC 100% ATF @ 150oC 80% 50/50 water/ethylene glycol @120oC 80% Water @ 100oC 85% Gasoline @ 25oC 100% Diesel fuel @ 25oC 100% Ethyl Alcohol @25oC 95%
General Information
Storage
Product should be stored in a cool and dry location at temperatures between 14°F (-10°C) to 86°F (30°C). Shelf life is 2 years from date of manufacture when stored at 72±8°F (22±4°C).
Note
The data are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is recommended that the product be tested in the application for which it is to be used.
Health & Safety in use
IRRITANT: Contains Methacrylate Esters which may irritate eyes, respiratory organs and skin. In case of contact with the skin, wash immediately with plenty of water.
Loading...