Vibra-Tite 535 Technical Data

Technical Data Sheet

Vibra-Tite® 535

Product Description

Vibra-TITE 535 Gel Retaining Compound is an
anaerobic retaining adhesive for all types of
cylindrical assembles. Cured performance shows
controlled high strength with good temperature and
solvent resistance against water and non-polar
solvents. This product cures rapidly on plated, oily
metal surfaces or inactive surfaces.

Typical Applications

Replaces press fit assembles and keyways. Used on
gear box bolts/drive shaft, bearing applications.

Instructions for Use

Ensure parts are clean, dry and free from oil and
grease.

Procedure for Application

Product is normally hand applied from the bottle onto
threaded parts.

Compatible Primers

Primers such as Vibra-TITE Excel 611 (Primer N) or
Excel 612 (Primer T) can be used. The use of
primers can result in lower strength and performance
should be tested after full cure.

Technical Features

Resin:................................Modified acrylate

Color:.................................Green

Fixture Speed w/Primer………...<1 seconds
Fixture Speed w/o Primer 5-10 min @ 77ºF

Viscosity……………...........Gel

Gap Fill..................................0.015"

Max. Operating Temp…… -65°F to +300°F

Cured Performance

Full Cure Time: 24 hours @ 68°F
Typical Breakaway Strength:

3/8 Phos-oil 170 – 300 lb-ins

Typical Prevailing Strength:

3/8 Phos-oil 100 – 350 lb-ins

Presentation

Tubes….......50ml, 250ml

Retaining Compound

September 2014

General Information

Storage

Product should be stored in a cool and dry location at
temperatures between 14°F (-10°C) to 86°F (30°C).
Shelf life is 2 years from date of manufacture when
stored at 72±8°F (22±4°C).

Note

Using Vibra-TITE 535 is easy, the product is color
coded green and once cured, it seals and vibration
proofs the assembly, giving high compressive shears.