Vibra-Tite 460 Technical Data

Page 1
Technical Data Sheet
Vibra-Tite® 460
Thread Sealant
December 2016
Product Description
Typical Applications
Vibra-Tite 460 High Temperature Thread Sealant with PTFE lubricates parts during assembly. The cure system allows for realignment of parts up to 24 hours from application. This product can be used on most hydraulic, pneumatic, oil, water, and gas connections.
Instructions for Use
Ensure parts are clean, dry and free from oil and grease.
Procedure for Application
Product is normally hand applied from the tube or brushed directly onto threaded parts.
Compatible Primers
Primers such as Vibra-Tite Excel 611 (Primer N) or Vibra-Tite Excel 612 (Primer T) can be used. The use of primers can cause loss of strength and performance should be tested.
Technical Features
Resin:..................................Dimethylacrylate
Color:.......................................White
Fixture Speed w/Activator…<10 minutes Fixture Speed w/out Activator……4hrs Viscosity…………………..350000 cps
Gap Fill..........................................0.012 cp
Max. Operating Temp…… -65°F to +400°F
Cured Performance
Full Cure Time.................24 hours @ 68°F
Pressure Resistance………………10000 psi
Presentation
Tubes...........50ml, 250ml and liter (bottle)
Storage
Product should be stored in a cool and dry location at temperatures between 14°F (-10°C) to 86°F (30°C). Shelf life is 2 years from date of manufacture when stored at 72±8°F (22±4°C).
Note
Apply to clean fittings filling the 2nd and 3rd threads. Prevent uncured sealant from entering the system by not filling the first thread. Product conforms to GM 1182607, NFS
Health & Safety in use
IRRITANT: Contains Methacrylate Esters which may irritate eyes, respiratory organs and skin. In case of contact with the skin, wash immediately with plenty of water.
General Information
Loading...