Vibra-Tite 444 Technical Data

Technical Data Sheet
Vibra-Tite® 444
Thread Sealant
September 2012
Product Description
Typical Applications
Typical applications are hydraulic and pneumatic fittings, servo mechanisms and fine filtration systems.
Instructions for Use
Ensure parts are clean, dry and free from oil and grease.
Procedure for Application
Product is normally hand applied from the bottle directly onto threaded parts.
Compatible Primers
Vibra-TITE Excel 612 (Primer T) can be used. The use of primers can cause loss of strength and performance should be tested.
Technical Features
Resin:..................................Dimethylacrylate
Color:.......................................Brown
Fixture Speed w/Activator…<10 minutes Fixture Speed w/out Activator……1 hour Viscosity………………………300-500 cps
Gap Fill............................................0.007 cp
Max. Operating Temp…… -65°F to +300°F
Cured Performance
Full Cure Time.................24 hours @ 68°F
Pressure Resistance………………10000 psi
Presentation
Bottles…......................50ml, 250ml and liter
General Information
Storage
Product should be stored in a cool and dry location at temperatures between 14°F (-10°C) to 86°F (30°C). Shelf life is 2 years from date of manufacture when stored at 72±8°F (22±4°C).
Note
In a liquid state High Pressure 444 Threadsealant readily disperses in hydraulic fluid and is virtually non-fouling in all types of hydraulic systems. The adhesive/sealant contains no fillers or particles and will not foul valves or screens.
Health & Safety in use
IRRITANT: Contains Methacrylate Esters which may irritate eyes, respiratory organs and skin. In case of contact with the skin, wash immediately with plenty of water.
Loading...