Vibra-Tite 427 Technical Data

Page 1
Technical Data Sheet
Vibra-Tite® 427

Product Description

Typical Applications

Provides an instant seal between threaded fittings. Uncured sealant is miscible with hydraulic fluid and will not clog filter and other components in hydraulic systems.

Instructions for Use

Ensure parts are clean, dry and free from oil and grease.

Procedure for Application

Product is normally hand applied from the bottle directly onto threaded parts.

Compatible Primers

Primers such as Vibra-TITE Excel 611 (Primer N) or Vibra-TITE Excel 612 (Primer T) can be used. The use of primers can cause loss of strength and performance should be tested.

Technical Features

Resin ................................................ Dimethylacrylate
Color: ............................................................... Yellow
Fixture Speed w/Activator ....................... <10 minutes
Fixture Speed w/o Activator ................ 90 min@ 77°F
Viscosity ................................................... 420,000 cps
Gap Fill ................................................................. N/A
Shelf Life ....................................... 12 months @ 68°F
Max. Operating Temp ........................ -65°F to +300°F

Cured Performance

Full Cure Time .............................. 24 hours @ 68°F
Pressure Resistance................................... 10,000 psi

Presentation

Tubes....................................50ml & 250ml
Thread Sealant
November 2014

General Information

Storage

Product should be stored in a cool and dry location at temperatures between 14°F (-10°C) to 86°F (30°C). Shelf life is 2 years from date of manufacture when stored at 72±8°F (22±4°C).

Note

For optimal performance apply 427 Medium Strength Threadsealant to the 2nd and 3rd threads and not the leading thread.

Health & Safety in use

IRRITANT: Contains Methacrylate Esters which
may irritate eyes, respiratory organs and skin. In
case of contact with the skin, wash immediately
with plenty of water.
Loading...