Cyanoacrylate
Instant SuperGlue Ethyl
316
Product Description
Vibra-TITE 316 Instant SuperGlue Ethyl
Cyanoacrylate is a medium to high viscosity
SuperGlue where large gap fill is important,
or where the materials are absorbent. Instant
SuperGlue 316 is versatile and will bond
most plastics, rubbers, and metals. Because
of its viscosity, Instant SuperGlue 316
allows additional alignment time.
Typical Applications
Typical applications are ferrite cores,
magnets, loud speaker cones, metal badges
and electronic components. Instant
SuperGlue 316 is so versatile that it will
bond many other substrates.
Instructions for Use
Ensure parts are clean, dry and free from oil
and grease.
Procedure for Application
Product is normally hand applied from the
bottle sparingly to one side and parts are
held until fixture strength is achieved.
Compatible Accelerators
Accelerators such as Vibra-TITE Excel 621,
Excel 623 or Excel 624 can be used for
accelerating fixture speeds, for filet curing
or for priming absorbent surfaces.
Technical Features
Resin:.......................... Ethyl Cyanoacrylate
Color:...........................Clear
Fixture Speed w/Accelerator...<5 seconds
Fixture Speed w/out Accelerator. 25-60 sec.
Viscosity ....................................1500 cP
Gap Fill.........................................0.008"
Shelf Life...................... 12 months @ 40°F
Max. Operating Temp…… -65°F to +180°F
Cured Performance
Full Cure Time................. 24 hours @ 68°F
Tensile Shear Strength..................3200 psi
Presentation
Bottles.......................... 1 ounce and 1 pound
General Information
Storage
Refrigeration at 40°F provides optimum
storage stability.
Note
Prior to use, remove all surface
contaminants such as oil or grease. Products
like isopropyl alcohol can be used. Test
compatibility of cleaner with substrate.
Make sure surface is completely dry before
bonding. Product conforms to A-A3097
Type II and CL3 Ethyl.
Health & Safety in use
CAUTION: SuperGlues bond skin and eyes
on contact. If accidental skin bonding
occurs, wash area with warm soapy water
and slowly pry skin apart using a blunt
object (such as a teaspoon handle.) In case
of eye contact, bathe immediately with
water and seek immediate medical attention.
Product Data Sheet
Loading...