Page 1
Technical Data Sheet
Vibra-Tite® 265
Light Cure
December 2012
Product Description
Vibra-Tite 265 is a uv curing , modified methacrylate
ester adhesive gel. Vibra-Tite 265 is designed for
wire and component tacking.
Properties of Uncured Material
Chemical Type Modified methacrylate
Appearance Pale yellow
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cP
Brookfield RVT,
Spindle 7 @ 20 rpm 25,000 cPs
Spindle 7 @ 2rpm 100,000 cPs
Specific Gravity 1.05
Typical Curing Performance
Cure Speed
UV fixture time: < 10 sec @100 mW/cm2
Tack free time: < 10 sec @ 100 mW/cm2
Depth of cure: 1-3mm 60 sec @100 mW/cm2
Performance of Cured Material
Typical Values
Tensile Strength ISO 6922
Pin (gb) to glass: 1000-1600 psi
General Information
Storage
Product should be stored in a cool and dry location at
temperatures between 10 oC to 21 oC. Optimal storage
is 22±4oC. Shelf life is 12 months from date of
manufacture when stored at 22±4oC.
Note
The data are furnished for information only and are
believed to be reliable. We cannot assume
responsibility for the results obtained by others over
whose methods we have no control. It is
recommended that the product be tested in the
application for which it is to be used.
Vibra-Tite is a registered trademark of ND Industries,
Inc.
Loading...