Page 1
Structural Adhesive
Light Cure
255
Product Description
Vibra-TITE 255 is a single component, high
viscosity UV structural adhesive suitable for
bonding glass to glass or glass to metal. This
product cures when exposed to ultraviolet
radiation. When cured, it is highly resistant
to vibration and impact forces.
Typical Applications
Used to bond, seal or coat metal and glass
components in industrial applications.
Typical used include, but are not limited to,
bonding electrical devices, appliance parts,
and decorative components.
Instructions for Use
Ensure parts are clean, dry and free from oil
and grease.
Procedure for Application
This product is UV sensitive. Exposure to
daylight, UV light and artificial lighting
should be kept to a minimum during storage
and handling. For best performance surfaces
to be bonded should be clean and free from
grease.
Properties
255 Light Cure Structural Adhesive cures
when exposed to UV light (365 NM).
Technical Features
Resin:........................Urethane Methacrylate
Color:............................Clear - Amber liquid
Viscosity:..................... 6000 cps
Shelf Life:......................12 months @ 68°F*
Max. Operating Temp........ -65°F to +300°F
* Unopened container
Cured Performance
Shear Strength..............................5000 psi
Fixture Speed ............. <10 seconds UV cure
Presentation
Bottles......................................50ml and liter
General Information
Storage
Store in cool area out of direct sunlight
Note
Use UV light source to tack when one
substrate is clear.
Health & Safety in use
IRRITANT: Contains Methacrylate Esters
which may irritate eyes, respiratory organs
and skin. In case of contact with the skin,
wash immediately with plenty of water.
Product Data Sheet
Loading...