Page 1
Technical Data Sheet
Vibra-Tite® 230
Product Description
Vibra-Tite 2 30 i s a m odified s tructural acr ylic
adhesive that can be cure either by UV curing, heat
curing o r a ctivator c uring.. V ibra-Tite 2 30 is
designed f or bon ding metals, glass a nd c eramic
materials. Vibra-Tite 230 is designed to give fast cure
when us ed i n c onjunction with Vibra-Tite E xcel
Activator 611, or with UV light.
Properties of Uncured Material
Chemical Type Modified methacrylate
Appearance Pale yellow
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cP
Brookfield RVT,
Spindle 5 @ 20 rpm 14,000-25,000 cPs
Specific Gravity 1.05
Typical Curing Performance
Cure Speed
Fixture time with activator: 2-6 min
Fixture time with UV light: 10 sec.
Performance of Cured Material
Typical Values
Tensile Strength ISO 6922
Pin (gb) to glass: 1000-1600 psi
Light Cure
March 2012
General Information
Storage
Product should be stored in a cool and dry location at
temperatures between 10
is 2 2±4
manufacture when stored at 22±4
o
C. Shelf l ife i s 12 months from da te of
Note
The data are furnished for i nformation o nly a nd ar e
believed t o b e reliable. W e can not as sume
responsibility for the results obtained b y o thers o ver
whose methods we have n o c ontrol. I t is
recommended t hat t he p roduct b e t ested i n t he
application for which it is to be used.
Vibra-Tite is a registered trademark of ND Industries,
Inc.
o
C to 21 oC. Optimal storage
o
C.
Loading...