Page 1
Technical Data Sheet
Vibra-Tite® 215
Product Description
Vibra-Tite 215 is a uv curing ,modified methacrylate
ester adhesive with secondary heat cu re. Vibra-Tite
215 is designed for UV potting and bonding glass to
plastic substrates.
Properties of Uncured Material
Chemical Type Modified methacrylate
Appearance Pale yellow
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cP
Brookfield RVT,
Spindle 5 @ 20 rpm 3500 cPs
Specific Gravity 1.05
Typical Curing Performance
Cure Speed
UV fixture time: < 10 sec @100 mW/cm
Tack free time: < 10 sec @ 100 mW/cm
Depth of cure: 1-3mm 60 sec @100 mW/cm
2
2
2
Performance of Cured Material
Typical Values
Tensile Strength ISO 6922
Pin (gb) to glass: 1000-1600
psi
Light Cure
March 2012
General Information
Storage
Product should be stored in a cool and dry location at
temperatures between 10
is 2 2±4
manufacture when stored at 22±4
o
C. Shelf l ife i s 12 months from da te of
Note
The data are furnished for i nformation o nly and ar e
believed to be reliable. W e cannot as sume
responsibility for th e results obtained by others o ver
whose methods we have n o c ontrol. I t is
recommended t hat t he p roduct b e t ested i n t he
application for which it is to be used.
Vibra-Tite is a registered trademark of ND Industries,
Inc.
o
C to 21 oC. Optimal storage
o
C.
Loading...