Vibra-Tite 202 Technical Data

Technical Data Sheet

Viz-Torque™ 202

Tamper Detection Mark

August 2016

Product Description

Viz-Torque 202 is an inspection coating used on
completed fittings, assemblies, nuts, bolts and studs
to show whether a part has been moved from its
original position. Once dried in place, the Viz-Torque
202 is dry and brittle which allows the film to quickly
break in the case of tampering out in the field. The
Viz-Torque 202 has good adhesion to most metals
when applied to a clean, dry surface.

Properties of Material

Chemical Type: Solvent – Isopropyl Alcohol
Appearance: Paste
Colors: – Orange, Blue, Green, Red, Yellow, Black,

White, Gray, Pink

Solids: 43-47%
Viscosity: @ 25ºC, cP

Brookfield RVT,

Spindle 5 @ 20 rpm: 11,000-18,000

Specific Gravity: 1.0
Tack Free Time: 20 seconds
Full Cure Time: Within 24 hours
Temperature Range: -20°F - 300°F
Flash Point: 53°F (12°C)

*note drying time increases with increasing film
thickness. High airflow can help aid the drying
process

Features

- Bright, highly visible colored paste that
dries to a brittle film

- Brittle film that easily breaks when
assembly has been tampered with

- Provides instant visual inspection to indicate
loss of torque on an assembly

- Fluoresces under UV Light

- Provides professionally finished look to an
assembly

- Material lightens when exposed to high heat

General Information

Storage

Product should be stored in a cool and dry location at
temperatures between 32°F (0°C) to 86°F (30°C).
Shelf life is 1 year from date of manufacture when
stored at 72±8°F (22±4°C).