Vibra-Tite 202 Catalog Page

TAMPER DETECTION MARKER

®

VISUALLY IDENTIFY

LOOSE FASTENERS

Viz-Torque is an inspection paste applied across completed
fittings, assemblies, nuts, bolts and studs to show whether
a part has been moved from its original position.

  

Easy to use

Simply apply a single bead of

Viz-Torque material across the

assembled fasteners and allow to

dry. No need to prepare surfaces.

Fast Identification

A bright, highly visible colored

paste which will fluoresce under

black light, making it easy to detect

without requiring testing.

WHY USE VIZ-TORQUE?

Once dried in place, Viz-Torque is

resistant to environmental elements,

repairs.

Dries Quick

Skins over in 20 seconds, dries in

20 minutes and is fully cured in 24

hours. Dry time can be reduced by

increasing air flow.

but brittle and fragile enough to

consistently break in the case of

tampering or loss of torque. Early
detection of a loose fastener helps

prevent collateral damage and

limits time and cost associated with

FEATURES









Exhibits good adhesion to most metals when
applied to a clean, dry surface.

Helps quality control by providing warranty
management in the event of tampering.

Does not easily wash off with water or mild
solvents.

Compatible with most metals, paints and plastics.

COLORS

1 oz. tube of Viz-Torque is available in a variety of
colors to meet your visual identification needs.

COLOR
Orange 20211 White 20251
Green 20221 Black 20261
Blue 20231 Yellow 20271
Red 20241 Pink 20281

NUMBER

COLOR NUMBE

R