Vibra-Tite 123 Technical Data

Technical Data Sheet

Vibra-Tite® 123

Product Description

Vibra-TITE 12 3 H igh T emp-Medium Strength
Threadlocker is a b lue single c omponent a naerobic
threadlocker. 1 23 joins t hreaded pa rts e xposed t o
operating temperatures up t o 450°F. It offers
excellent performance at temperatures more the 150°
higher than other threaded locking products because
of its enhanced chemistry.

Typical Applications

Applications i nclude hi gh t emperature l ocking a nd
sealing of studs, nuts, screws, bolts, and fittings. Parts
are locked and sealed against leakage, contamination
and corrosion. The higher viscosity is more suitable
for l arge d iameter, co arse t hreaded p arts. I t i s
recommended f or pa rts t hat do n ot r equire r outine
maintenance as disassembly is difficult and may
require heat.

Instructions for Use

Ensure p arts ar e cl ean, d ry and f ree f rom o il an d
grease.

Procedure for Application

Product is normally hand applied from the bottle onto
threaded parts.

Compatible Primers

Primers such as Vibra-TITE Excel 611 (Primer N) or
Excel 6 12 ( Primer T ) can be u sed. T he use of
primers can result in lower strength and performance
should be tested after full cure.

Technical Features

Resin: Dimethylacrylate
Color: Blue
Fixture Speed w/Primer: <5 seconds
Fixture Speed w/out Primer: 60 min. @ 77°F
Viscosity: (Thixotropic) 3000 cps
Gap Fill: 0.007"
Max. Operating Temp: -65°F to +450°F

Cured Performance

Full Cure Time: 24 hours @ 68°F
Typical Breakaway Strength..70-150 in.lbs.
Typical Prevailing Strength...50-150 in.lbs.
Breakaway Strength @450F 60-100in lbs
Prevailing Strength @450F 30-80 in lbs

Threadlocker

December 2016

General Information

Storage

Product should be stored in a cool and dry location at
temperatures b etween 14°F ( -10°C) to 86°F (30°C).
Shelf l ife i s 2 years from d ate o f manufacture when
stored at 72±8°F (22±4°C).

Note

Vibra-TITE 123 provides a lubricating ability during
assembly and after curing results in medium locking
strength. N ot r ecommended f or u se with u se with
most p lastics a s stress cr acking ca n occur. Excellent
environmental and chemical resistance.

Health & Safety in use

IRRITANT: C ontains M ethacrylate E sters which
may irritate eyes, respiratory organs and skin. In case
of c ontact with t he s kin, wash immediately with
plenty of water.