VibraLITE Mini VM-SMC, Mini VM-VBL, Mini VM-SWH, Mini VM-VOR, Mini VM-VPN Quick Start Manual

This product may be purchased from Connevans Limited
secure online store at www.DeafEquipment.co.uk

DeafEquipment.co.uk

Offering you choice
Helping you choose

Connevans.info

Solutions to improve the quality of life

Vibra

QUICK START GUIDE:

Note: to SET any function, the Digit(s) that you want to set
MUST BE FLASHING.

TIME & CALENDAR: Set hour, minutes, seconds & date.
Press “MODE” button to rotate to the “TIME” screen.
Hold down “SET” button to start the flashing of Hour

Digit(s).
Use “ST/STP” button to set the hour.
Press "MODE” button to go to Minute Digit(s) flashing.
Use “ST/STP” button to set the minutes.
Continue to set Seconds, Month, Day of the Month &Year
by using “MODE” & “ST/STP” buttons as above.

Press “SET” button to save settings.

TO VIEW DATE: Press “ST/STP” button while in “TIME”

screen.

ALARMS: Up to 12 Alarms can be set.

Press the “MODE” button to rotate to the “ALM” screen.
Hold down the “SET” button to start the flashing of Alarm

Number Digit(s).
Use the “ST/STP” button to select alarm you would like to
set (“01” –“12”).
Press the “MODE” button to go to the Hour Digit(s)
flashing.
Use the “ST/STP” button to set the hour.
Press the MODE button to go to Minute Digit(s) flashing.

Use the “ST/STP” button to set the minutes.
Press the “SET” button to save settings, OR
TO ADVANCE to the next alarm, press the “MODE” button

while the minutes are flashing and then press the “ST/STP”
button.

COUNTDOWN TIMER: Set up to 23 hours, 59 minutes &
59 seconds. Set to have Countdown Repeat each time it
reaches zero or stop.

Press the “MODE” button to rotate to the “TMR” screen.
Hold down the “SET” button to start the flashing of Hour

Digit(s).
Use the “ST/STP” button to set the hour.
Continue to set minutes & seconds using “MODE” &
“ST/STP” buttons as above.
Press the “MODE” button and REP will show on the
screen with the Digit(s) flashing of “ON” or "- -" for off.

Use the “ST/STP” button to Select On or Off.
Press the “SET” button to save settings,

OPTIONS: Set Vibration, Sound or Both

Press the “MODE” button to rotate to the “OPT” screen.
Hold down the “SET” button and “VIB” will show on the
screen with Digit(s) flashing of “ON” or “- -“for off.
Use the “ST/STP” button to Select On or Off.
Press the “MODE” button and “SND” will show on the
screen with the Digit(s) flashing of “ON” or “- -“for off.
Use the “ST/STP” button to Select On or Off.
Press the “MODE” button and “BUTN” will show on the
screen with the Digit(s) flashing of “ON” or “- -“ for off.
Use the “ST/STP” button to Select On or Off.
Press the “SET” button to save settings,

LOCK OUT FEATURE:

Stops accidental changes to programmed
settings.

Push “MODE” and “SET” buttons at the
same time while in “TIME” screen to lock.

Repeat to unlock.

LITE

7

Mini

DETAILED INSTRUCTIONS:

TIME MODE

 Program and view hour, minutes, seconds and date.
 View date by pressing “ST/STP” button. Screen will

automatically return to TIME.

Time Mode Programming Instructions:

1) Press the “MODE” button to rotate to the TIME Mode

screen.

2) Hold down the “SET” button. The hour Digit(s) will be

flashing.

3) Use the “ST/STP” button to set

the hour. “PM” will be displayed
at the left of the screen when the
hour is set for PM. If the hour is
set for AM, the box will be empty.

4) Press the “MODE” button. The minute Digit(s) will be

flashing.

5) Use the “ST/STP” button to set the minutes.

6) Press the “MODE” button. The second Digit(s) will be

flashing.

7) Use the “ST/STP” button to reset the seconds to zero

(00) if necessary.

8) Press the “MODE” button. The month will be flashing.

9) Use the “ST/STP” button to set the month. (1-12)

10) Press the “MODE” button. The day of the month will be

flashing.

11) Use the “ST/STP” button to set

the day of the month. (1-31)

12) Press the “MODE” button. The

numbers of the YEAR will be
flashing.

13) Use the “ST/STP” button to set the year.

14) Press the “SET” button to save settings.

Note: When setting the Time Mode, if programming is
interrupted and no button is pushed within 2 ½ minutes, the
flashing will stop and the settings that are shown on the
screen will be held. Finish programming by repeating steps
1 and 2 and rotating through the other steps to complete as
needed.

ALARM MODE:

 Program up to twelve daily alarms.
 Alarms will respond with the alert (Vibrate, Sound or

both) that has been set in the OPTION MODE.

 Alerts are approximately twenty seconds in duration

before stopping automatically. Activated alerts can be
stopped manually by pushing the “ST/STP” button once
(to conserve battery).

 Programmed alarm times will go off daily based on the

Time set in the TIME Mode.

Alarm Mode Programming Instructions:

1) Press the “MODE” button until “ALM” is displayed at the

top of the screen. After approximately two seconds
“OFF” will be displayed. (Or if an alarm time was
previously set, that set time will show on the display).

2) Hold down the “SET” button until

the number in the box at the
bottom right of the screen flashes.

3) Use the “ST/STP” button to select

the alarm you would like to set (“01” –“12”).

4) Press the “MODE” button. The hour Digit(s) will be

flashing.

5) Use the “ST/STP” button to set the hour.

Note: “PM” will be displayed at the left of the screen

when the hour is set for PM. When the hour is set for
AM, the box will be empty.

6) Press the “MODE” button. The minute Digit(s) will be

flashing.

7) Use the “ST/STP” button to set the minutes.

8) Press the “SET” button to save settings, OR to advance

to the next alarm, press the “MODE” button while the
minutes are flashing and then press the “ST/STP”

button. Repeat steps 4 through 8.

Note: When setting the times in Alarm Mode, if
programming is interrupted and no button is pushed within 2
½ minutes, the flashing will stop and the settings that are
shown on the screen will be held. The screen will return to
Time Mode automatically. Reset as necessary.

Turning Alarms On/Off:

1) Press the “MODE” button until “ALM” is displayed at the

top of the screen. After approximately two seconds the
last viewed alarm will be displayed.

2) Use the “SET” button to select the alarm you would like

to turn on/off.

3) Use the “ST/STP” button to turn off or on the selected

alarm.

Note: When alarm is on, alarm time will be displayed.
When alarm is off, “OFF” is
displayed at top of screen.

Note: To deactivate or re-activate
ALL Alarms, see OPTION Mode

Programming Instructions and select OFF or ON for
Vibration and Sound.

COUNTDOWN TIMER MODE:

 Program a countdown time up to 23 hours, 59 minutes

and 59 seconds.

 When the countdown reaches zero (0:00 00) the alert(s)

that are set (Vibrate, Sound or Both) will activate for
twenty seconds and stop automatically. Activated alert
can be stopped manually by pushing the “ST/STP”
button once (to conserve battery)

 REPEAT option can be turned “ON or “OFF”.

When REPEAT is turned “ON”, the programmed

countdown time will automatically repeat each time it
reaches zero (0:00 00).

Countdown Timer Programming Instructions:

1) Press “MODE” button until

“TMR” is displayed at top of
screen.

2) Hold down “SET” button until

hour Digit(s) flash.

3) Use the “ST/STP” button to set the hour.

4) Press “MODE” button. Minute Digit(s) will be flashing.

5) Use “ST/STP” button to set minutes.

6) Press “MODE” button. Second Digits will be flashing.

7) Use “ST/STP” button to set seconds.

8) Press “MODE” button. “REP”

(for Repeat) will be displayed
at the top of the screen and
“ON” or “- -” for off will be
flashing in the box at the bottom right.

9) Use “ST/STP” button to select REPEAT “ON” or

“- -” for OFF.

10) Press “SET” button to save settings.

Note: When setting Countdown Timer(s), if programming is
interrupted and no button is pushed within 2 ½ minutes, the
flashing will stop and settings that are shown on screen will
be held. Finish programming by repeating Step 2 and
continue as needed.
Countdown Time will remain on the display. Press the
“MODE” button to rotate to Time Mode when wanted.

Starting/Stopping the Countdown Timer:

1) While in the Countdown Mode Screen,

press the “ST/STP” button to start the

countdown. The countdown timer icon
located under the Hour Digit(s) on the
screen will be flashing.

2) Press the “ST/STP” button to stop the countdown.

The time remaining will be displayed.

Note: When Countdown time is set to REPEAT and the

alert is currently activated, press the “ST/STP” button

twice to stop the countdown.

3) Press the “ST/STP” button to resume counting down.

Quick Reset of Original Countdown Time:

1) Hold down “SET” button until previously programmed

countdown time is displayed on the screen.

2) Press the “ST/STP” button to restart at previously set

time.

OPTION MODE:

 VIBRATION and SOUND alerts can be turned “ON’ or

“OFF”. The alerts that are turned ON will be activated

by the preset Daily Alarms, Countdown Timer and
Button push.

Note: Button Push Alerts, when set “ON”, will indentify the
current alert setting (vibration, sound or both) each time the
“MODE” button is pressed. This allows a quick check to
confirm current alert functions. Button alerts will provide
easy monitoring to determine if enough battery power
remains to power the Vibration and Sound alerts.

Option Mode Programming Instructions:

1) Press the “MODE” button until “OPT” is displayed at the

top of the screen. After approximately two seconds
“VIB” for Vibration will be displayed.

2) Hold down the “SET” button until

“ON” or “- -” for OFF is flashing
in the box at the bottom right.

3) Use the “ST/STP” button to turn

vibration “ON” or “OFF”.

4) Press the “MODE” button.

“SND” for Sound will be
displayed at the top of the
screen. ““ON” or “- -” for OFF
will be flashing in the box at the bottom right.

5) Use “ST/STP” button to turn sound “ON” or “OFF”.

6) Press the “MODE” button. “BUTN” will be displayed at

the top of the screen. ““ON” or “- -” for off will be
flashing in the box at the bottom right.

7) Use the “ST/STP” button to turn Button signal “ON” or

“OFF”.

8) Press the “SET” button to save settings.

Note: When setting the features in Option Mode, if
programming is interrupted and no button is pushed within 2
½ minutes, the flashing will stop and the settings that are
shown on the screen will be held.
Screen will return to Time Mode automatically. Reset as
necessary.

Quick Viewing of Current Option Mode Settings:

1) Press the “MODE” button until “OPT” is displayed at the

top of the screen. After approximately two seconds

“VIB” will be displayed. If vibration is currently turned
on, “ON” will be displayed at the bottom of the screen.
If turned off, “- -” will be displayed.

2) Press the “ST/STP” button repeatedly to view other

current option mode settings. (‘SOUND”, “BUTTON”)

LOCK OUT FEATURE:

 Lock Out the usage of “MODE”, “ST/STP” and “SET”

buttons after programming is completed. In lock mode,
time, countdown and alarms settings cannot be
changed accidentally.

 Date viewing does not show in this mode.
 Manual stop of Alerting Signal (to conserve battery) by

pushing a button will still function.

Push “MODE” and “SET” buttons at
the same time while in TIME Mode to
Lock or Unlock. When Lock Out is
activated, the lock icon will show on
the screen.

EL LIGHT: (DISPLAY BACK LIGHT)

Press the “LIGHT” button to turn on the backlight. Light will

stay on for approximately 3 seconds and then turn off
automatically if another button is not pushed. Light will
continue to stay on while any other button is pushed within
3 seconds.

BATTERY:

Standard 3 volt lithium CR1632 is required. We recommend
the Battery be replaced by a qualified person to maintain
water resistance. Battery may be replaced by consumer
providing care is taken to re-install O ring properly for water
resistance. A small screw driver
(Phillips size 00) is required to remove 6 small screws.
Full Instructions available on www.vibralite.com

Battery Life will vary depending on daily usage of Vibration
& Sound on Alarms and Countdown Timer and use of EL
Light. Examples: Estimated Battery Life is up to 2 years if
20 second vibration is used once daily and would be
approximately 2 1/2 months if 20 second vibration is used
12 times daily.

IMPORTANT PRECAUTIONS:

VibraLITE watches are not intended to be worn during
swimming, diving or in the shower.

ONE YEAR LIMITED WARRANTY:

Your

Vibra

LITE7 Mini is warranted to be free from defects

in material or workmanship for One Year from the date of
purchase. We recommend that you retain your original
sales slip as your proof of purchase date.
This is a limited warranty and covers watch functions only.
This warranty does not apply to the battery, band, case or
crystals since such items are subject to wear and tear of
daily use. The warranty is void if the watch has been
tampered with, altered, abused, or subjected to extreme
conditions for which it was not designed, or repaired other
than by a qualified service center. During the warranty
period, return the watch, with dated proof or purchase, in a
secure package, insured and with shipping charges
prepaid. No C.O.D. packages will be accepted. Please
include a note describing detailed reason for return, your
return address and include $10.00 (check, money order,
Visa, Master Card, American Express or Discover) for
shipping and handling in the USA. Other countries please
contact us for pricing.

SERVICE:

Before sending your watch for service, have the battery
checked and/or try resetting by pushing all 4 buttons at the
same time until the display clears. Reset by pushing all 4
buttons again and re-program.

OUT OF WARRANTY SERVICE:

Follow the same procedure for shipping to us as you would
for warranty service. Be sure to include a description of the
reason for return. Before any work is performed, an
estimate will be submitted for your approval for any parts
and labor not covered by the warranty.

DISCLAIMER: In no event shall Global Assistive Devices
be held liable for any special, incidental, indirect or
consequential damage whatsoever including, but not limited
to, damages for loss of property, personal injury, loss of
privacy, failure to meet any duty, negligence and any other
loss whatsoever, however caused, even if Global has been
advised of the possibility of such damages. This disclaimer
of liability applies to any damages or injury, including but
not limited to those caused by any failure of performance of
the product. Responsibility for selection, safety and
suitability of any product rests with the consumer.
Circumstances or consequences arising out of or in any
way related to the use of or inability to use our products is
the responsibility of the consumer. Global Assistive
Devices, Inc. cannot be held liable in any way.

GLOBAL ASSISTIVE DEVICES, INC.

Oakland Park FL 33334 USA

www.GlobalAssistive.com

www.VibraLITE.com