VibeMaxx Vibration Speaker Instruction Manual

VibeMaxx Vibration Speaker

Instruction Manual

Features

Innovative speaker system for PC, MP3 players, mobile phones etc.
(requires 3.5 mm stereo jack socket)

Turns various objects into speakers

Power: 1 W, impedance: 4 ohm
Power supply via USB cable or two AAA batteries (these are not included in the delivery)

Can be connected to drinks cans, milk/juice cartons, windows, books and much more

Pocket-size, compact and lightweight

How to get started

Socket for USB cable

1.
ON/OFF button

2.
Status light

3.

Included in delivery

Portable vibration speaker with 3.5 mm stereo jack
USB charging cable (length: 80 cm)
Extension lead for the audio cable (length: 50 cm)
Two spare sticky pads

1

Vibration head

4.
Sticky pad

5.

English

(continued on page 2)

2

How to get started

Remove the protection cover from the sticky pad and stick the vibration head onto an object
of your choice. You can use any objects with flat, solid surfaces e.g. boxes, milk/juice
cartons, drinks cans, books, windows etc. Please keep the protection cover safe for future
usage.

5.

Insert the 3.5 mm stereo jack into the relevant socket on your computer, MP3 player or
mobile phone. Switch on the VibeMaxx Vibration Speaker and your MP3 player (or similar
device) and start playing music. Adjust the volume on your MP3 player.

6.

Push the back onto the VibeMaxx Vibration Speaker. To avoid any cables being damaged
ensure that they are positioned in their holders.

4.

Remove the VibeMaxx Vibration Speaker from the packaging and slide the back off the
vibration speaker.

1.

(continued from page 1)

Remove the 3.5 mm stereo jack, take out the vibration head from its bracket and unravel
the audio cable.

2.

For the power supply, insert two AAA 1.5 V batteries or connect the VibeMaxx Vibration
Speaker to your PC via a USB cable.

3.

VibeMaxx Vibration Speaker

Instruction Manual

English

DC in

2 AAA batteries

protecting film

wire guide

3

www.Great-Gadgets.com

English

VibeMaxx Vibration Speaker

Instruction Manual

Safety instructions

Warning! Product warranty will be forfeited if damages result from disregarding the above
safety instructions. We are not liable for damages to person and property as a result of
improper handling of the product and/or disregarding the above safety instructions.

This instruction manual provides information for safe use of the VibeMaxx Vibration Speaker.
Please retain this manual for future reference.

If you choose to operate the VibeMaxx Vibration Speaker with batteries, only use AAA
batteries. Old and new batteries should not be used together at the same time.

If you choose to operate the VibeMaxx Vibration Speaker via USB or if you don’t use the
product for some time, remove all batteries to avoid the vibration speaker being damaged
due to leaking batteries.

Do not use the VibeMaxx Vibration Speaker if damaged.
For safety reasons, repairs and/or alterations to the product are not permitted.
Humidity, heat or dropping the product can damage the device and make it unusable.

Use a dry and soft cloth to clean the product.

!

Additional operating advice

A voltage below 3 V may deteriorate the sound quality. In this instance, check the battery
charge condition.

You don’t always need to stick the VibeMaxx Vibration Speaker onto the object. In some
instances, you can lay it onto the item. Please ensure that the vibration speaker cannot fall
off it though whilst being used.

High volume on your handheld device may deteriorate the sound. In this instance, turn down
the volume on your PC, MP3 player or mobile phone etc.

Every object has its own sound. Use the VibeMaxx Vibration Speaker for different objects
and differently sized items and and conduct very unique sound experiments.

The sticky pad is reusable if you put the protection cover back on after every use. Keep the
sticky pad clean by carefully wiping a wet finger over the surface to remove dirt or dust.