Viavito Satori Owner's Manual

Exercise Bike Owner’s Manual

www.viavito.com E-mail: [e-mail]

- 1 -

Thank you for purchasing your new fitness product from Viavito.

IMPORTANT!
Please read all instructions carefully before using this product.
Retain this manual for future reference.
The specifications of this product may vary slightly from the illustrations and are subject
to change without notice.

IMPORTANT SAFETY NOTICE: NOTE THE FOLLOWING PRECAUTIONS BEFORE
ASSEMBLING OR OPERATING THE MACHINE.

1. Assemble the machine exactly as the descriptions in the instruction manual.

2. Check all the screws, nuts and other connections before using the machine for the first
time and ensure that the trainer is in the safe condition.

3. Set up the machine in a dry level place and keep it away from moisture and water.

4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine in the
area of assembly to avoid dirt etc.

5. Before beginning training, remove all objects within a radius of 2 meters from the
machine.

6. DO NOT use aggressive cleaning products such as detergents to clean the machine,

only use the supplied tools to assemble the machine. Remove drops of sweat from the
machine immediately after finishing training.

7. This machine is not suitable for therapeutic or medical purpose.

8. Only do training on the machine as per instructions. Use only original spare parts for

any necessary repairs.

9. This machine can be used by only one person at a time.

10. Wear training clothes and shoes which are suitable for fitness training with the

machine

11. WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may

result in serious injury or death. If you feel faint stop exercising immediately.

- 2 -

12. People such as children and disabled persons should only use the machine in the

presence of another person who can give aid and advice.

13. The power of the machine increases with increasing the speed, and the reverse. The

machine is equipped with a computer console which can adjust the resistance. Reduce the
resistance by pressing the ‘down’ resistance key. Increase the resistance by pressing the
‘up’ resistance key.

14. The maximum user weight is 140kg. Product weight: 31.0 Kg.

15. This machine is for indoor, home use only. Safety standards: EN957 1 & 5 – Class HA

16. WARNING: the safety level of the equipment can be maintained only if it is examined

regularly for damage and wear, e.g. bearings, connection points.

17. Please examine the equipment carefully before you use it, especially the components

most susceptible to wear, e.g. handlebar, cranks, pedals and the connection points
frequently.

18. Please stop using the equipment immediately if there are any defective components

and keep it out of use before you replace the components or it is repaired by a qualified
engineer.

19. Unsupervised children should be kept away from the equipment at all times.

20. WARNING! Excessive or Inappropriate use or of this machine such as while under the

influence of drugs or alcohol or not in line with instructions may result serious injury or
death.

21. Make sure there is sufficient free space around the exerciser when you set it up

22. Please note that an improper and excessive work-out may be harmful to your health

23. When adjusting the adjustable parts, make sure they are adjusted properly and note the
marked, maximum adjusting position, for example of the saddle support, respectively.

Be sure to consult a physician before you start any exercise program. He may give you
proper hints and advice with respect to the individual intensity of stress for you as well as to
your work-out and sensible eating habits.

- 3 -

Space Required (mm)

Site area 500 990 1320
Training area 650 1100 1520
Free area 1250 1700 2320

x

Z

Y

x

Y

Z

- 4 -

CHECK LIST (CONTENTS OF PACKAGE)

MAKE SURE YOU HAVE THE FOLLOWING PARTS

- 5 -

User's Manual

B700

NO.N-8 Regular Washer φ7(1)

NO.N-9 Spring

Washerφ7(1)

NO.N-7 Bushing

φ12*40MM (1)

- 6 -

HARDWARE PACK

B700

NO.N-8 Regular Washer φ7(1)

NO.N-9 Spring

Washerφ7(1)

NO.N-7 Bushing

φ12*40MM (1)

- 7 -

Assembly instructions

Step 1

1. Attach the Front Stabiliser (J) to the Main Frame (G-9) using two Allen bolts (N-3).

2. Attach the Rear Stabiliser (I) to the Main Frame (G-9) using two Allen bolts (N-3).

M8*16L

N-6 Allen Key

N-3

- 8 -

Step 2

1. Assemble the two Pedals (G-4 R+L) onto the Crank (G-2 + G-12) with a screw driver.
Note: Screw the left pedal spindle counter-clockwise and the right pedal’s spindle
clockwise. Use a wrench (or screwdriver) to screw the two spindles completely.

N-5 Screwdriver

- 9 -

Step 3

1. Insert the seat post (K) into the main frame, then choose the desired position and tighten the knob

(G-19). Be sure the knob is always tightened. Note: When you have chosen a desired position,
tighten the Seat Post Knob until you hear a “click”.

2. Attach the seat (G-6) to the seat slider (L-1). The Slider can be adjusted at different angles.
Tighten the two nuts under the seat using a wrench. In addition, the slider can be adjusted on the
horizontal plane by loosening the knob.

N-4 Box Spanner

N-5 Screwdriver

- 10 -

Step 4

1. Please remove the Semi-circle washer (E-1), Screw (E-2) and flat washers (E-3) from the main

frame.

2. Take the Handlebar post cover (G-24) and pass Handlebar post (H-2) through it.

3. Hold the Handlebar post (H-2) and connect the Lower computer cable (G-20) to the Upper

computer cable (H-1)

4. Slide the Handlebar Post (H-2) into the Main frame then fix it with 4 sets of Semi-circle washer

(E-1), Screw (E-2) and flat washers (E-3).

Note: Do not fully tighten Semi-circle washers, Screws and Flat washers one at a time. It is better to
fix the 4 sets in place loosely, then once all 4 are fitted, fully tighten.

M8*16L

? 8*2T

N-6 Allen Key

E-2

E-1

? 8*2T

E-3

- 11 -

Step 5

1. Attach the Handlebar (M) to the Handlebar post (H-2) using the main clamp (N-2). Fix firmly with
T-knob (N-1).

2. Pass the hand-pulse wire (M-4) through the hole.

- 12 -

Step 6

Connect the Upper cable wire (H-1) and hand pulse wire (M-4) to the back of computer (A). Then
attach the computer (A) to the computer bracket with the enclosed screws (A-1).
Attach the bottle holder (G-25) to the post (H-2) with screws (H-3).

- 13 -

CONSOLE INSTRUCTION MANUAL

[BUTTON FUNCTIONS]

UP

To select training mode and adjust function value up

DOWN

To select training mode and adjust function value down.

ENTER

In stop mode, to confirm setting or selection

RESET

Reset: In stop mode, press the button to back to main menu and
clear all set value.
Total Reset: At any time, hold the RESET key for 2 seconds,
LCD full display 2s and then back to home page.

START/STOP

To start or stop workout.

RECOVERY

To test hear rate recovery status.

BODY FAT

In stop mode, press it for body fat measurement

KM/ML SWITCH

The switch is for select KM (℃)or ML(℉) mode.

[DISPLAY FUNCTIONS]

TIME

Display range 0:00~99:59 ; Setting range 0:00~99:00 minutes

SPEED

0.0~99.9km/H &ml/H

RPM

0~999

DISTANCE

Display range 0.00~99.9 ; Setting range 0.00~99.9km/ml

CALORIES

Display range 0~999 ; Setting range 0~990 Cl

PULSE

Display range 30~230 ; Setting range 0-30~230

WATT

Setting range 10~350

- 14 -

OPERATION

1. POWER ON

Connect power supply, console will power on with a long beep sound, LCD full display 2s (drawing 1)
then display wheel diameter/ VDE in SPEED/DIST for 1s (drawing 2). Then come to calendar setting
mode.

If no signal input, console will enter into POWER SAVING mode in 30s.

Drawing 1 Drawing 2

2. SETTINGS

2.1. Date setting

Room temperature and date will display (drawing 3). Set Year, Month, Date and Clock by pressing
the ENTER、UP、DOWN buttons.

Drawing 3

- 15 -

2.2. User Profile setting

Press ENTER button each time when value’s determined for USER# (select U1~ U4, drawing 4),
Gender (drawing 5), AGE (drawing 6), HEIGHT (drawing 7), and WEIGHT (drawing 8). All entered
data will be saved in user profile. After user profile is set up, console will go into main menu (drawing

9).

Drawing4 Drawing 5

Drawing 6 Drawing 7

Drawing 8 Drawing 9

- 16 -

3. SELECTING A WORKOUT

In main menu (drawing 9), Turn the wheel to select: MANUAL PROGRAM (drawing 10) USER
PROGRAM (drawing 11)H.R.C. (drawing 12)  WATT(drawing 13). Press ENTER button to
confirm your selected workout type.

Drawing 10 Drawing 11

Drawing 12 Drawing13

3.1. Manual Mode

After powering on, press START/STOP button to start exercise in MANUAL mode.
When entering Manual mode, you may set up Time, Distance, Calories, Pulse target, and LOAD

level and press ENTER button to confirm. After setting the targets, press the START/STOP button to
start workout.

Load level also can be adjusted from level 1 to level 32 during exercise by turning the wheel

- 17 -

3.2. Program Mode

Entering Program mode, rotate joggle wheel to select Program1~Program12. After the program is
selected, LOAD window will flash to be set, pre-set value=1 (drawing 14). Choose the LOAD level by
rotating joggle wheel.

Press ENTER button to set up exercise target (TIME/DISTANCE/CALORIES/PULSE). Then press
START/STOP to start work out.

Drawing 14

3.3. User Program mode

Rotate joggle wheel to create personal program profile with 20 segments and confirm by pressing
ENTER. Then press START/STOP to start exercise.

During program setting or after finishing setting, user could hold on the ENTER button 2s into
TIME/DISTANCE/CALORIES/PULSE setting mode.

- 18 -

3.4. H.R.C Mode

First set user AGE by joggle wheel (preset age =25), then go to programs selection. There will be 4
programs: 55%, 75%, 90% and TAG (drawing 15); use the joggle wheel to select one program and
press the ENTER button to set up exercise target. Press the START/STOP button to start workout.

If user selects H.R.C. TAG (press the ENTER button to enter), target PULSE value will be shown
and then rotate the joggle wheel to adjust target range from 30~230.

Drawing 15

3.5. WATT mode

Rotate joggle wheel to adjust WATT value range from 10~350. After setting TIME/DISTANCE/
CALORIES/PULSE, press START/STOP to start exercise. During workout, system will adjust LOAD
level automatically based on WATT value input and workout status.

3.6. Body Fat Mode

In STOP mode, press the BODY FAT button to start this function. System will start to measure after
you have entered Gender, Age, Height, and Weight information. During measuring, hold both hands
on the handgrip. The LCD will display ”- - - - -“ (drawing 16) for 8 seconds until the console finishes
measuring. Then LCD will display BODY FAT percentage (drawing 17), BODY FAT advice symbol
(drawing 18), and BMI (drawing 19) by turn in every 3 seconds.

Drawing 16 Drawing 17

- 19 -

Drawing 18 Drawing 19

4. Recovery Mode

After exercising, keep holding the handgrips and press “RECOVERY” button. All function display will
stop except “TIME” that will start counting down from 00:60 to 00:00 (drawing 20). Screen will
display your heart rate recovery status with the F1, F2….to F6 (drawing 21).F1 is the best, F6 is the
worst. Press the RECOVERY button again to return the main display.

During the recovery time, re-press “RECOVERY” and console will go back to previous page.

Drawing 20 Drawing 21

Note:

1. When there is no input signal for 4 minutes, console will enter into power saving mode (drawing

22).All setting and exercise data will stored until user start exercise again.

2. If console behaves abnormally, please unplug the mains adaptor and plug in again.

Drawing 22

- 20 -

4.1 Error messages:

*The LCD displays”---- “ “ ----“ - Not holding the hand pulse sensor correctly.

*E-1 – There is no heart rate signal input detected.
*E-4 – Occurs when FAT% is below 5 or exceeds 50 and BMI result is below 5 or exceeds 50.

- 21 -

Assembly Diagram

- 22 -

FITNESS PROGRAM GUIDELINES

The following guidelines will help you to plan your exercise program and exercise safely. Remember
that proper nutrition and adequate rest are essential for successful results.

WARNING: Before beginning this or any other exercise program consult your doctor. This

is especially important for pregnant women and new mothers, all people over
the age of 35, and those with medical problems such as heart disease, high or
low blood pressure, injuries, joint problems, obesity and asthma.

WHY EXERCISE?

Exercise has been proven essential for good health and general wellbeing. Regular exercise
will:

 Relieve tension and stress
 Provide enjoyment and fun
 Stimulate the mind
 Help maintain stable weight
 Control appetite
 Boost self-image
 Improve muscle tone and strength
 Improve flexibility
 Lower blood pressure
 Relieve insomnia

TARGET HEART RATE

- 23 -

To train effectively you should aim to work in the heart rate zone appropriate to your age as
stipulated below. Please note this is a guide and your heart rate at rest and during training is
determined by your fitness level and other lifestyle factors as well as your age. If you reach the
recommended beats per minute below and feel you’re over-exerting yourself stop, rest and
when you feel recovered return to exercise at a lower intensity.

TRAINING ZONE

AGE

MIN-MAX (BPM)

20

133-167

25

132-166

30

130-164

35

129-162

40

127-161

45

125-159

50

124-156

55

122-155

60

121-153

65

119-151

70

118-150

75

117-147

80

115-146

85

114-144

BEGINNERS GUIDE TO EXERCISE

If you’re beginning an exercise program for the first time or starting a new exercise program, you

must check with your doctor that you are fit to do so particularly if:

 You have been diagnosed with heart problems, high blood pressure or other medical

conditions.

 You have not exercised for over a year.
 If you are over 35 and do not currently exercise,
 You are pregnant or are a new mother
 You have diabetes
 You have chest pain, or experience dizziness or fainting spells.
 You are recovering from an injury or illness.

WORK-OUT TIPS

- 24 -

 Always perform a warm-up and stretching exercises before your work-out and a cool down

and stretching exercises at the end

 Start slowly and build up your time, speed and resistance gradually; doing too much too soon

can lead to injuries.

 If you are sore or tired, give yourself a few extra days to recover.

HOW TO BEGIN

 Start with two or three 15-minute sessions per week with a rest day between work-outs.
 Warm-up for 5 to 10 minutes with gentle movements incorporating the whole body such as

walking while swinging your arms in a circle and then stretch the muscles you’ll use during

your work-out. Seated cycling works mainly the quadriceps (thighs) and hamstrings.

 Increase the pace and resistance to slightly harder than comfortable and exercise for as long

as you can. You may only be able to exercise for a few minutes at a time, but that will change
quickly when you exercise regularly.

 End each work –out with a 5-minute cool down with the resistance set to a low level. You

should then stretch the muscles you’ve just worked to develop flexibility, reduce muscle

soreness and prevent injury.

 Increase your work-out time by a few minutes each week until you can work continuously for

30 minutes per session.

 Don’t worry about distance or pace for the first few weeks, focus on endurance and

conditioning.

HOW HARD SHOULD YOU WORK?

When exercising, you should try to stay within your target heart rate (THR) zone.
The table on the previous page will tell you the THR for your age.
Always be aware of how you feel when you exercise. If you feel dizzy or light-headed, stop
immediately and rest.

- 25 -

STRETCHING GUIDE

TIPS FOR STRETCHING

 Begin with small mobility exercises of all the joints e.g. simply rotate the ankles, bend the

knees and roll your hips. Gradually make the movements larger and faster. This will allow

the body’s natural lubrication (synovial fluid) to protect the surface of your bones at these

joints.

 Always warm up the body before stretching, as this increases blood flow around the body,

creating warmth which makes the muscles more supple

 Start with your legs, and steadily work up the body.
 Each stretch should be held for at least 10 seconds (working up to 20 to 30 seconds) and

usually repeated about 2 or 3 times.

 Do not stretch until it hurts. If there’s any pain, ease off.
 Don’t bounce. Stretching should be gradual and relaxed.
 Don’t hold your breath during a stretch.
 Stretch after exercising to prevent muscles from tightening up.
 Stretch at least three times a week to maintain flexibility.

WARM-UP and COOL-DOWN

A successful cardio-vascular exercise program consists of a full body warm-up, aerobic exercise,
and a cool-down. Do the entire program at least two and preferably three times a week, resting
for a day between workouts. After several months, you can increase your workouts to four or five
times per week.

- 26 -

WARM-UP

The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm
up for five minutes before strength-training or exercising aerobically. Perform activities that raise
your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running on the spot. Try to incorporate moves that take the
joints through their full range of motion.

STRETCHING

Stretching while your muscles are warm after a proper warm-up and again after your strength or
aerobic training session is very important. Muscles stretch more easily at these times because of
their elevated temperature, which greatly reduces the risk of injury. Stretching develops flexibility
and reduces muscles soreness.
Stretches should be held for 15 to 30 seconds.

- 27 -

DO NOT BOUNCE OR OVER-STRETCH. Take your time in each stretch. Gradually take each
stretch a little deeper on every out breath to your personal maximum.

Remember always to check with your physician before starting any exercise program.

COOL-DOWN

The purpose of cooling down is to return the body to its normal or near normal, resting state at
the end of each exercise session. A proper cool-down slowly lowers your heart rate, allows blood
to return to the heart and helps prevent muscle soreness caused by the build-up of lactic acid in
the muscles.

Exploded Diagram

Calf-Achilles Stretch

Inner Thigh Stretch

Toe Touch

Side Stretch

Hamstring Stretch

- 28 -

- 29 -

PARTS LIST

No.

Description

Q'ty

A

Computer

1

PCS

A-1

Screw

4

PCS

B

Axle set

1

SET

B-1

Screw

3

PCS

B-2

Axle 1 PCS

B-3

Drive pulley

1

PCS

B-4

Bushing

1

PCS

C

Flywheel set

1

SET

C-1

Star washer

2

PCS

C-2

Screw nut

5

PCS

C-3

Bushing

1

PCS

C-4

Bearing 6900RS

1

PCS

C-5

Pulley

1

PCS

C-6

Bearing 6203RS

1

PCS

C-7

One way bearing

1

PCS

C-8

Flat washer

1

PCS

C-9

Bearing 6003RS

1

PCS

C-10

Bearing 6300RS

1

PCS

C-11

Flywheel axle

1

PCS

C-12

Flywheel

1

PCS

C-13

Bushing

1

PCS

D

Belt tightener set

1

SET

D-1

Screw

1

PCS

D-2

Pulley wheel (incl. 2 bearings)

1

PCS

D-3

Curve washer

2

PCS

D-4

Nylon nut

1

PCS

D-5

Screw

1

PCS

D-6

Flat washer

1

PCS

D-7

Flat washer

1

PCS

D-8

Spring

1

PCS

- 30 -

D-9

Belt tightener

1

PCS

E

Handlebar screw set

1

SET

E-1

Semi-circle washer

2

PCS

E-2

Screw

4

PCS

E-3

Flat washer

2

PCS

F

Magnetic brake set

1

SET

F-1

Screw

2

PCS

F-2

Spring washer

2

PCS

F-3

Flat washer

2

PCS

G-1

Side cover, right

1

PCS

G-2

Crank, right

1

PCS

G-3

Nyloc screw

2

PCS

G-4

Pedal, pair

1

SET

G-5

Screw

4

PCS

G-6

Saddle

1

PCS

G-7

Side cover, left

1

PCS

G-8

Screw

4

PCS

G-9

Frame

1

PCS

G-10

Swiching power

1

PCS

G-11

DC wire

1

PCS

G-12

Crank, right

1

PCS

G-13

Bearing 6203RS

2

PCS

G-14

Curve washer

1

PCS

G-15

Flat washer

1

PCS

G-16

C clip

1

PCS

G-17

Drive belt

1

PCS

G-18

Seat post sleeve

1

PCS

G-19

Seat post locking knob

1

PCS

G-20

Lower cable

1

PCS

G-21

Screw

1

PCS

G-22

Sensor wire

1

PCS

G-23

Sensor holder

1

PCS

G-24

Handlebar post cover

1

PCS

G-25

Bottle holder

1

PCS

- 31 -

H-1

Upper cable

1

PCS

H-2

Handlebar post

1

PCS

H-3

Screw M5x20L

2

PCS

I

Rear stabilizer set

1

SET

I-1

End cap

2

PCS

I-2

Screw

4

PCS

I-3

Adjusting pad

2

PCS

I-4

Rear foot

1

PCS

J

Front stabilizer set

1

SET

J-1

Left end cap with wheel

1

PCS

J-2

Front foot

1

PCS

J-3

Right end cap with wheel

1

PCS

J-4

Screw

2

PCS

J-5

Adjusting pad

2

PCS

K

Seat post

1

SET

L

Seat slider set

1

SET

L-1

Seat slider

1

PCS

L-2

Fixed screw set for seat slider

1

PCS

L-3

Seat slider locking knob

1

PCS

L-4

Flat washer

1

PCS

L-5

End cap

2

PCS

M

Handlebar set

1

SET

M-1

Foam grip

2

PCS

M-2

Hand pulse sensor

2

PCS

M-3

End cap

2

PCS

M-4

Hand pulse sensor wire

1

PCS

M-5

Screw

2

PCS

M-6

Handlebar

1

PCS

N-2

Handle fixing clamp

1

PCS

N

Hardware kit

1

SET

N-1

T-shape knob

1

PCS

N-3

Allen bolt

4

PCS

N-4

Box spanner

1

PCS

N-5

Screw driver

1

PCS

- 32 -

N-6

Allen key

1

PCS

N-7

Bushing

1

PCS

N-8

Flat washer

2

PCS

N-9

Spring washer

2

PCS

P

Servomotor set

1

SET

- 33 -

Customer Support

Should you require any assistance regarding this product please gather the following information
and then contact us using the details below:

• Serial No. - This can be found on a label on the product itself

• Original purchase date

• Place of purchase

• Information about the place and conditions of use

• Precise description of the issue or defect

IMPORTANT!! - Please retain your sales receipt, Viavito Customer Care may request proof of
purchase to validate eligibility for warranty service. Warranty cover starts from the date shown on the
proof of purchase.

The best way to contact us is via the website: www.viavito.com

Viavito Ltd
42 Clipstone Street
London W1W 5DE
Email: [e-mail]

- 34 -

Viavito Manufacturer’s Warranty

Viavito Ltd warrants this product to be free of defects of material and workmanship, under normal
use and conditions, for a period of 12 months from the date of the original purchase.

Warranty extensions may apply to this product subject to registering this product with Viavito. To
qualify please complete the warranty registration form on the Viavito web site at www.viavito.com
Full details of warranty extensions and the Viavito Manufacturer’s Warranty are available online at

www.viavito.com

Terms

This warranty extends only to the original purchaser and is not transferable. The warranty does not
cover:

1) Normal wear and tear

2) Any changes to upgrade this product from its normal state or use as described in the user

manual

3) Damage resulting from:

a) Transport
b) Abuse, misuse, failure to follow instructions or improper or abnormal use
c) Non-home use - including commercial, professional, or rental purposes
d) Repairs not provided by Viavito Ltd
e) Accidents, lightning, water, fire, or any other causes beyond the control of Viavito
f) Improper location including, but not limited to, humid, dusty, or outdoor environments

Viavito is not responsible or liable for direct, indirect, or consequential losses arising out of or in
connection with the use of this product or damages with respect to any loss of property, revenue,
profits, enjoyment or use. Nor for any costs of removal or installation of this product.

This warranty covers products purchased from new inside the United Kingdom.

It may be necessary to perform repairs at a Viavito authorised repair center.

This warranty is in addition does not in any way affect your statutory rights