Viavi FBPP-WIFI Quick Start Manual

Press the Power Button. The Status
Indicator LED will flash, indicating that
your FBPP Wireless Adapter is ready to
pair with FiberChekMOBILE.

Press the Power Button. The Status
Indicator LED will flash, indicating that
your FBPP Wireless Adapter is ready to
pair with FiberChekMOBILE.

Access your Android device’s Wi-Fi Set­tings. (Launch the Settings app. Under

“Wireless and Networks,” make sure
“Wi-Fi” is turned on, then tap “Wi-Fi.”)

Select your Wireless Adapter in the list
of Wi-Fi networks and join the network.
After your Wireless Adapter is listed
as “Connected,” tap the Home button
to hide the Settings app. Launch the
FiberChekMOBILE app.

Access your iOS device’s Wi-Fi Settings.

(Launch the Settings app and tap “Wi-Fi.”
Make sure “Wi-Fi” is turned on.) Select

your Wireless Adapter in the list of Wi-Fi
networks and join the network. After
your Wireless Adapter appears above
the list of Wi-Fi networks, press the
Home button to hide the Settings app.
Launch the FiberChekMOBILE app.

Your Wireless Adapter is now connected
to FiberChekMOBILE. Connect a Viavi
device to one of the Wireless Adapter’s
Device USB Ports to use that device with
FiberChekMOBILE.

Your Wireless Adapter is now connected
to FiberChekMOBILE. Connect a Viavi
device to one of the Wireless Adapter’s
Device USB Ports to use that device with
FiberChekMOBILE.

Using the Wireless Adapter
with FiberChekMOBILETM for
AndroidTM Devices

Using the Wireless Adapter
with FiberChekMOBILETM for
iOS Devices

You can connect up to two Viavi devices
simultaneously, but FiberChekMOBILE
will display only one device at a time.
Use the drop-down menu in the upper
left of the screen to select the active
device.

You can connect up to two Viavi devices
simultaneously, but FiberChekMOBILE
will display only one device at a time.
Use the drop-down menu in the upper
left of the screen to select the active
device.

Press the Power Button when you are
finished using your Wireless Adapter.
The next time you power on your
Wireless Adapter near your Android
device and launch the FiberChekMOBILE
app, communications will resume auto­matically.

Press the Power Button when you are
finished using your Wireless Adapter.
The next time you power on your
Wireless Adapter near your iOS device
and launch the FiberChekMOBILE app,
communications will resume automati­cally.

1.1.

2.2.

3.3.

4.4.

5.5.

Press the Power Button. The Status
Indicator LED will flash, indicating that

your FBPP Wireless Adapter is ready to
pair with FiberChekPRO.

Access FiberChekPRO’s Wi-Fi Setup
Menu. (Setup → FiberChekPRO Setup...
→ Wi-Fi) Select your Wireless Adapter
in the list of “Available Devices” and
click the “Connect” button. After your
Wireless Adapter appears in the “My
Devices” list, click the “OK” button in the
lower left of the screen to exit the Setup
Menu.

Your Wireless Adapter is now connect­ed to FiberChekPRO. Connect a Viavi
device to one of the Wireless Adapter’s
Device USB Ports to use that device with
FiberChekPRO.

Using the Wireless Adapter
with FiberChekPRO

TM

You can connect up to two Viavi devices
simultaneously, but FiberChekPRO will
display only one device at a time. Use
the drop-down menu in the upper left
of the screen to select the active device.

Press the Power Button when you are
finished using your Wireless Adapter.
The next time you power on your Wire­less Adapter near your device running
FiberChekPRO, communications will
resume automatically.

1.

2.

3.

4.

5.

Overview and Features

Notice

Every effort was made to ensure that the information in this
manual was accurate at the time of printing. However, informa­tion is subject to change without notice, and Viavi reserves the
right to provide an addendum to this manual with information
not available at the time that this manual was created.

Copyright and Trademarks

© Copyright 2016 Viavi Solutions Inc. All rights reserved. No
part of this guide may be reproduced or transmitted, electron­ically or otherwise, without written permission of the publish­er. Viavi Solutions and the Viavi logo are trademarks of Viavi
Solutions Inc. (“Viavi”). All other trademarks and registered
trademarks are the property of their respective owners.

Status Indicator LED Legend

Battery charging.

Battery charged.

Battery low.

Battery fault or over­temp; charge suspended.

Wi-Fi connected.

Wi-Fi pairing or
connecting.

FBPP-WIFI Wireless Adapter
Quick Start Guide

(Continued from previous panel.)

Copyright Release

Reproduction and distribution of this guide is authorized for US
Government purposes only.

Terms and Conditions

Specifications, terms, and conditions are subject to change
without notice. The provision of hardware, services, and/or
software are subject to Viavi’s standard terms and conditions,
available at www.viavisolutions.com/en/terms-and-conditions.

Federal Communications Commission (FCC) Notice

This product was tested and found to comply with the limits
for a EN 61326-1- CISPR 11 (Class A) digital device. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This product generates, uses, and can radiate
radio frequency energy and, if not installed and used in accor­dance with the instruction manual, may cause harmful interfer­ence to radio communications. Operation of
this product in a residential area is likely to cause harmful
interference, in which case you will be required to correct the
interference at your own expense.

The authority to operate this product is conditioned by the
requirements that no modifications be made to the equipment
unless the changes or modifications are expressly approved by
Viavi.

WEEE and Battery Directive Compliance

Viavi has established processes in compliance with the Waste
Electrical and Electronic Equipment (WEEE) Directive, 2002/96/
EC, and the Battery Directive, 2006/66/EC.

This product, and the batteries used to power the product,
should not be disposed of as unsorted municipal waste and
should be collected separately and disposed of according to
your national regulations. In the European Union, all equipment
and batteries purchased from Viavi after 2005-08-13 can be re­turned for disposal at the end of its useful life. Viavi will ensure
that all waste equipment and batteries returned are reused,
recycled, or disposed of in an environmentally friendly manner,
and in compliance with all applicable national and international
waste legislation.

It is the responsibility of the equipment owner to return equip­ment and batteries to Viavi for appropriate disposal. If the
equipment or battery was imported by a reseller whose name
or logo is marked on the equipment or battery, then the owner
should return the equipment or battery directly to the reseller.
Instructions for returning waste equipment and batteries to
Viavi can be found in the Environmental section of Viavi’s web
site at www.viavisolutions.com. If you have questions concern­ing disposal of your equipment or batteries, contact Viavi’s
WEEE Program Management team.

Product Specifications

Contact Us

Dimensions
Weight
Connector
Power Source
Run Time
Charge Time

Power Supply

218 x 50 x 131 mm (8.6 x 2.0 x 5.2 in)
272 g (9.5 oz)
USB 2.0 (Micro-B)
Internal Li-ion Battery, USB power

5.5 hr

2.5 hr (2.1 A max power source)
8 hr (500 mA max power source)
5 VDC, 2.1 A USB power adapter with
interchangeable wall plug for EU, UK,
US, and AU

Document Num. 22114402, Rev. 02(Continued on following panel.)

North America:

+ 1 844 GO VIAVI

([phone])

All other regions:

To reach the Viavi office nearest you, visit
http://www.viavisolutions.com/contacts.