Viatran 359 Installation Manual

SANITARY PRESSURE TRANSMITTER

INSTALLATION MANUAL

MODEL 359

199 Fire Tower Drive

Tonawanda, NY 14150

Toll Free: 1-800-688-0030

International: 716-629-3800

Fax: [phone]

www.viatran.com

[e-mail]

1

98MANAL359 Rev. F 3/21/17

Specifications:

Connection Diagrams:

Output: 4-20 mA

Single Transmitter

Multiple Transmitters

Sensor Construction: Oil-Filled Silicon

Wetted Parts: 316 LSS

Electrical Mating Connection: Acceptable 18AWG
wire termination connection - 1/2” NPT (M)

Electrical Connections:

Green Wire: Case Ground

Type

‘L’

‘M’

Size Code

Short

Standard

7.38

10.81

2.14

6.54

HD

PRODUCT OVERVIEW

All information contained in this document is representative of a standard Model 359. If the product you ordered has special requirements or
modifications, refer to the Laser Marked information on the product and your purchase order for possible alteration to the product’s
configuration. Failure to verify product configuration before installation may cause permanent product damage and in most cases, void the
manufacturer’s product warranty. If you are unsure or have questions about your product, please contact our Application Engineers for
assistance.

Remove and retain all instruction manuals and performance certificates that are shipped with the product. These documents provide important
information on the product’s calibration, operation, safety precautions, recommended maintenance, re-calibration requirements, repair service
instructions and warranty information. These documents are updated from time to time as changes to the product occur and should be reviewed
at receipt so that proper and safe installation can occur.

Red: + Signal
Black: - Signal

Typical Adapter Installation

Long

13.06

8.79

HE

Typical Tank Installation

2

98MANAL359 Rev. F 3/21/17