VIA Technologies VTS8787X User Manual

Quick Guide

Overview

Grove connecto r

Camera lens

Specifications

Processor ARM Cort e x-A7 900MHz System Memory Storage Camera Sensor Camera Resolution 1920 x 1080 Camera Lens 130° Field-of-View Onboard I/O

Power Supply

Operating Syste m Linux Operating Temp. 0°C ~ 4 5°C Size 38mm x 38mm (1.5” x 1.5”)

64MB DDR SDRAM 128MB SPI Flash memory GalaxyCore GC2053 CMOS image sensor

3 LEDs (for power, Wi-Fi and active status) 1 Reset button 1 Microphone 1 Grove connector 1 Micro USB 2.0 port 1 Micro SD ca r d sl ot 1 Wi-Fi antenna

5V/500mA Micro USB 2.0 port 5V/300mA and 3.3V/500mA Grove connector

Reset button Microphone

Micro USB 2.0 por t

Wi-Fi antenna

Micro SD card slot

Packing List

• VIA Pixetto vision sensor

• Micro USB 2. 0 cable

• Grove cabl e

• Quick Guide

Connecting Method

1. Go t o www.pixetto.ai website to download the

pixetto-studio-1.0.0-windows.exe.

2. Double click on the pixetto-studio-1.0.0-windows.exe to install.

3. After the in stallation is complete d , the following shortcuts will

be created on your desktop.

4. C onnect the Micro USB cable to the Micro US B 2.0 port on the

VIA Pixetto vision sensor.

5. C onnect the VIA Pixetto vi sion sensor to the USB 2.0 or

USB 3.0 por t on your personal computer/laptop.

6. Wait until all three LEDs are lit. This indicates that the devi ce i s

ready to use. Remember to remove the camera lens cover.

7. Open the VIA Pixetto Utility tool to view the live capture video from the VIA P ixetto vision sensor.

Updating Firmware

1. Con nect the VIA Pixetto vision sensor t o your PC/laptop.

2. Open the VIA Pixetto Utility tools. Click Help from the menu items then select “Device Update” to update the firmware.

3. Wait until the upgrade is completed. CAUTION: Do not unplug the cable during the update process. Removing the cable may cause damage to the VIA Pixetto vision sensor.

Safety Precautions

• We recommend adult supervision for users under the age of 18

years old.

• Avoid contact with moist objects, or moist or damp

environments.

• The device is not water proof. Please avoid contact with wate r

at all times.

• Do not expose the device to extreme high or low

temperatures.

• To avoid damage , do not touch th e surface of

the device w h i le in use

For full instructions , p lease visi t th e official website www.pixetto.ai

FCC Caution

§ 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject t o the followi ng two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interf er ence received, in cluding in terference that may cause undesired operation.

§ 15.105 I n formation to the user. Note: T his equipm ent has been t ested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica t ions. However, there is no guarantee that inter ference will not occur in a pa rticular install atio n . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following m easures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that To which the receiver is con nected.

-Consult the dealer or an experienced radio/TV technician for help.

§ 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The modular can be installed or integrated in mobi le or Mobile devices. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body

If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC ID: NCIVTS8787X

The requirement for KDB 996369 D03: List of applicable FC C rules

FCC Part 15. 247.

No. Description

1 Peak Output Power 2 6dB and 99% Occupied Bandwidth

Conducted Band Edges and Spurious

Emission 4 Power spectral density (PSD) 5 Conducted Emission 6 Radiated Band Edges and Spurious Emission