VIA Technologies VT6212L User Manual

Apr/05 MN0VIA621206

1

VIA VT6212L USB 2.0 PCI Card

User Manual

Ver. 1.00

All brand names and trademarks are properties of their

Respective owners.

Apr/05 MN0VIA621206

2

System Requirements

z Windows® 98SE, 2000, ME, XP(Pentium® or K6® - class

processor -266 MHz or higher)

z Mac® OS 10.1 or Above

z 32MB of RAM

z Available PCI Slot

z CD-ROM Drive(for driver installation)

Specifications

z VIA VT6212L chipset

z USB 1.1 and 2.0 Compliant

z Up to 480 Mbps (Megabits-Per-Second) Data Transfer Rate

z 40 Times Faster Than The USB 1.1

z Hot Swappable Plug-n-Play

z 2 External Type A USB 2.0 Ports

z 2 Type A USB 2.0 Ports by connecting an optional 2-Port USB

cable to connector USB3

Package Contents

z 1 x USB 2.0 PCI Card

z 1 x Driver CD

z 1 x User Manual

Apr/05 MN0VIA621206

3

Hardware Installation

Be careful with polarity of the USB connector(USB3). Check the pin

assignment while you connect the USB cable.

Apr/05 MN0VIA621206

4

1. Remove your computer’s cover.

(Note: If necessary, consult your computer’s manual for help in

removing the cover)

2. Locate an available PCI slot and, if necessary, remove the expansion

slot bracket.

3. Insert the USB 2.0 Card gently but firmly until the card is fully

seated.

4. Fasten card to the computer case using a screw.

5. Replace the computer cover.

Pin No. Definition

1 Power

2 Power

3 USB3 D-

4 USB4 D-

5 USB3 D+

6 USB4 D+

7 GND

8 GND

9 No Pin

10 NC

Apr/05 MN0VIA621206

5

Driver Installation

Windows®98SE Installation

Make sure your version of Windows® is 98 Second Edition by check

the “Properties” of “My Computer”.

1. Windows will detect new hardware and start the “VIA Tech 3038

PCI to USB Universal Host Controller” driver search program. As

Figure 1. Click “Next”.