VIA Technologies VAB-630 User Manual
1.03-12312017-162000
USER MANUAL
VAB-630
Cost effective single board
computer with flexible I\O
and rich connectivity
Copyright
Copyright © 2016-2017 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language,
in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of VIA Technologies, Incorporated.
Trademarks
All trademarks are the property of their respective holders.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no
warranties, implied or otherwise, in regard to this document and to the products described in this document. The information
provided in this document is believed to be accurate and reliable as of the publication date of this document. However, VIA
Technologies assumes no responsibility for the use or misuse of the information (including use or connection of extra
device/equipment/add-on card) in this document and for any patent infringements that may arise from the use of this document. The
information and product specifications within this document are subject to change at any time, without notice and without obligation
to notify any person of such change.
VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any time without prior notice.
Regulatory Compliance
FCC-A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his
personal expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
Notice 3
The product described in this document is designed for general use, VIA Technologies assumes no responsibility for the conflicts or
damages arising from incompatibility of the product. Check compatibility issue with your local sales representatives before placing
an order.
Battery Recycling and Disposal
Only use the appropriate battery specified for this product.
Do not re-use, recharge, or reheat an old battery.
Do not attempt to force open the battery.
Do not discard used batteries with regular trash.
Discard used batteries according to local regulations.
Safety Precautions
Always read the safety instructions carefully.
Keep this User's Manual for future reference.
All cautions and warnings on the equipment should be noted.
Keep this equipment away from humidity.
Lay this equipment on a reliable flat surface before setting it up.
Make sure the voltage of the power source and adjust properly 110/220V before connecting the
equipment to the power inlet.
Place the power cord in such a way that people cannot step on it.
Always unplug the power cord before inserting any add-on card or module.
If any of the following situations arises, get the equipment checked by authorized service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you cannot get it work according to User's Manual.
The equipment has dropped and damaged.
The equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned or in a storage temperature above
70°C (158°F). The equipment may be damaged.
Do not leave this equipment in direct sunlight.
Never pour any liquid into the opening. Liquid can cause damage or electrical shock.
Do not place anything over the power cord.
Do not cover the ventilation holes. The openings on the enclosure protect the equipment from
overheating
VAB-630 User Manual
iv
Box Contents
VAB-630
1 x VAB-630 mainboard (with 1.0GHz VIA Cortex-A9 dual-core SoC)
1 x RTC battery
Ordering Information
Part Number Description
10GHL126000A0
SBC with 1.0GHz VIA Cortex-A9 SoC, 4GB eMMC, 1GB DDR3 SDRAM
2 x USB 2.0, Micro USB 2.0 OTG, HDMI, COM, DIO, 10/100Mbps
Ethernet, Micro SD card slot, and 12V DC-in.
Optional Accessories
Wireless Accessories
Part Number Description
EMIO-2550-01A1
3.75G HSPA/UMTS mobile broadband full size miniPCIe module
EMIO-5531-00A1
VAB-820-W IEEE 802.11b/g/n USB Wi-Fi & Bluetooth module with
assembly kit
EMIO-2531-00A1
VAB-820-W-M IEEE 802.11b/g/n miniPCIe Wi-Fi & Bluetooth module
with assembly kit and antenna
Display Accessories
Part Number Description
STK-10630-00A0
10.1” LVDS LCD Touch panel (1280x800) with LVDS and Touch Cable
99G63-02033A
12V 36W adapter power adapter (power adapter plug not included)
VAB-630 User Manual
v
Table of Contents
1. Product Overview ........................................................................................................................ 1
1.1. Key Features ........................................................................................................................................................ 1
1.2. Product Specifications ...................................................................................................................................... 2
1.3. Layout Diagram .................................................................................................................................................. 4
1.4. Product Dimensions .......................................................................................................................................... 5
1.5. Height Distribution ............................................................................................................................................ 6
2. I/O Interface ................................................................................................................................... 7
2.1. External I/O Ports .............................................................................................................................................. 7
2.1.1. Micro SD Card Slot .................................................................................................................................... 8
2.1.2. 10/100Mbps Ethernet Port ....................................................................................................................... 8
2.1.3. USB 2.0 Port ................................................................................................................................................. 9
2.1.4. Audio Jacks ............................................................................................................................................... 10
2.1.5. Micro USB 2.0 OTG Port........................................................................................................................ 10
2.1.6. DIO Port .................................................................................................................................................... 11
2.1.7. Power LED ................................................................................................................................................ 11
2.1.8. Power Button ............................................................................................................................................ 12
2.1.9. DC-in Jack ................................................................................................................................................. 12
2.1.10. COM Port .................................................................................................................................................. 13
2.1.11. HDMI® Port ............................................................................................................................................... 13
2.2. Onboard Connectors ..................................................................................................................................... 14
2.2.1. SIM Card Slot ........................................................................................................................................... 14
2.2.2. MiniPCIe Slot ............................................................................................................................................ 15
2.2.3. I2C Touch Connector .............................................................................................................................. 16
2.2.4. LVDS Panel Connector ........................................................................................................................... 17
2.2.5. Battery Connector ................................................................................................................................... 18
2.2.6. Reset Connector ...................................................................................................................................... 18
2.2.7. RTC Battery Connector........................................................................................................................... 19
2.2.8. UART Connector ..................................................................................................................................... 19
2.2.9. USB 2.0 Connector .................................................................................................................................. 20
3. Hardware Installation ................................................................................................................ 21
3.1. Installing into a Chassis ................................................................................................................................. 21
3.1.1. Suggested minimum chassis dimensions ........................................................................................... 21
3.1.2. Suggested minimum chassis height ..................................................................................................... 21
3.1.3. Suggested keepout areas ....................................................................................................................... 22
4. Software and Technical Supports ........................................................................................... 23
4.1. Android Support............................................................................................................................................. 23
4.2. Technical Supports and Assistance ............................................................................................................ 23
Appendix A. Installing Wireless Accessories .............................................................................. 24
A.1. Installing the EMIO-2550 miniPCIe mobile broadband module ............................................................ 24
A.2. Installing the EMIO-2531 miniPCIe Wi-Fi & Bluetooth module .............................................................. 27
A.3. Installing EMIO-5531 USB Wi-Fi module ..................................................................................................... 29
Appendix B. Installing LVDS Panel Display .................................................................................. 31
B.1. Connecting the LVDS Panel Display to the VAB-630 board .................................................................... 31
VAB-630 User Manual
vi
Appendix C. Connector Vendor Lists ............................................................................................ 33
C.1. VAB-630 Mainboard .......................................................................................................................................... 33
VAB-630 User Manual
vii
List of Figures
Figure 1: Layout diagram of the VAB-630 (top view) ..................................................................................................4
Figure 2: Layout diagram of the VAB-630 (bottom view) ...........................................................................................4
Figure 3: Mounting holes and dimensions of the VAB-630 (top view) ...................................................................5
Figure 4: External I/O port dimensions of the VAB-630 (front panel) ....................................................................5
Figure 5: External I/O port dimensions of the VAB-630 (back panel) .....................................................................5
Figure 6: Height distribution of the VAB-630 (top view) ............................................................................................6
Figure 7: Height distribution of the VAB-630 (bottom view) ....................................................................................6
Figure 8: Front panel I/O ....................................................................................................................................................7
Figure 9: Back panel I/O .....................................................................................................................................................7
Figure 10: Micro SD card slot diagram ............................................................................................................................8
Figure 11: 10/100Mbps Ethernet port diagram .............................................................................................................8
Figure 12: USB 2.0 port diagram .......................................................................................................................................9
Figure 13: Audio jack diagram ........................................................................................................................................ 10
Figure 14: Micro USB 2.0 OTG port diagram .............................................................................................................. 10
Figure 15: DIO port diagram........................................................................................................................................... 11
Figure 16: Power LED diagram ....................................................................................................................................... 11
Figure 17: Power button diagram .................................................................................................................................. 12
Figure 18: DC-in jack specification diagram ................................................................................................................ 12
Figure 19: DC-in jack diagram ........................................................................................................................................ 12
Figure 20: COM port diagram ........................................................................................................................................ 13
Figure 21: HDMI® port diagram ..................................................................................................................................... 13
Figure 22: SIM card slot diagram ................................................................................................................................... 14
Figure 23: MiniPCIe slot diagram ................................................................................................................................... 15
Figure 24: I2C touch connector diagram ...................................................................................................................... 16
Figure 25: LVDS panel connector diagram.................................................................................................................. 17
Figure 26: Battery connector diagram ............................................................................................................................ 18
Figure 27: Reset connector diagram ............................................................................................................................. 18
Figure 28: RTC battery connector diagram .................................................................................................................. 19
Figure 29: UART connector diagram ............................................................................................................................. 19
Figure 30: USB 2.0 connector diagram ......................................................................................................................... 20
Figure 31: Suggested minimum chassis dimensions .................................................................................................. 21
Figure 32: Suggested minimum internal ceiling height ............................................................................................ 21
Figure 33: Suggested keepout top areas...................................................................................................................... 22
Figure 34: Suggested keepout bottom areas .............................................................................................................. 22
Figure 35: Installing SIM Card......................................................................................................................................... 24
Figure 36: Inserting the EMIO-2550 module ............................................................................................................... 25
Figure 37: Securing the EMIO-2550 module .............................................................................................................. 25
Figure 38: Connecting the antenna cable and antenna ............................................................................................ 26
Figure 39: Connecting the antenna (to the micro-RF connector) .......................................................................... 26
Figure 40: Inserting the EMIO-2531 module ............................................................................................................... 27
Figure 41: Securing the EMIO-2531 module .............................................................................................................. 27
Figure 42: Connecting the Wi-Fi antenna cable and antenna ................................................................................. 28
Figure 43: Connecting the antenna cable to the micro-RF connector .................................................................. 28
Figure 44: Installing and securing EMIO-5531 module ............................................................................................ 29
Figure 45: Connecting USB Wi-Fi cable ....................................................................................................................... 29
Figure 46: Connecting the antenna cable and antenna ............................................................................................ 30
VAB-630 User Manual
viii
Figure 47: Connecting the antenna cable to the micro-RF connector .................................................................. 30
Figure 48: Connecting the touch screen cable to the touch controller module ............................................... 31
Figure 49: Connecting the USB touch cable ............................................................................................................... 31
Figure 50: Connecting the flex flat cable .................................................................................................................... 32
VAB-630 User Manual
ix
List of Tables
Table 1: Micro SD card slot pinouts ..............................................................................................................................8
Table 2: 10/100Mpbs Ethernet port pinouts ................................................................................................................8
Table 3: 10/100Mbps Ethernet port LED color definition .........................................................................................9
Table 4: USB 2.0 port pinouts ..........................................................................................................................................9
Table 5: Audio jack receptacle description .............................................................................................................. 10
Table 6: Micro USB 2.0 OTG port pinouts ................................................................................................................ 10
Table 7: DIO port pinouts ............................................................................................................................................. 11
Table 8: Power button behavior description ............................................................................................................ 12
Table 9: DC-in jack specification .................................................................................................................................. 12
Table 10: DC-in jack pinouts ........................................................................................................................................... 12
Table 11: COM port pinouts ........................................................................................................................................... 13
Table 12: HDMI® port pinouts ........................................................................................................................................ 13
Table 13 SIM card slot pinouts ...................................................................................................................................... 14
Table 14: MiniPCIe slot pinouts ...................................................................................................................................... 15
Table 15: I2C touch connector pinouts ......................................................................................................................... 16
Table 16: LVDS panel connector pinouts..................................................................................................................... 17
Table 17: Battery connector pinouts ............................................................................................................................. 18
Table 18: Reset connector pinouts ................................................................................................................................ 18
Table 19: RTC battery connector pinouts ..................................................................................................................... 19
Table 20: UART connector pinouts ................................................................................................................................ 19
Table 21: USB 2.0 connector pinouts ............................................................................................................................ 20
Table 22: VAB-630 connector vendor lists .................................................................................................................. 33
VAB-630 User Manual
1
1. Product Overview
Based with a compacted 3.5 inch SBC and measuring at 14.6cm x 10.2cm, the VIA VAB-630 is a highly
integrated based ARM board. It’s powered by 1.0GHz VIA Cortex-A9 dual-core processor. The VIA VAB-
630 combines two independent, integrated GPUs for 3D/2D graphics acceleration, in addition it offers
support for MPEG-2 and H.264 video decoding up to 1080p.
The VIA VAB-630 mainboard has been optimized to support 3G, Wi-Fi and Bluetooth function with its rich
I\O, optional accessories includes a 10.1” touch panel that brings application like HMI and digital signage
product more easily to fit-in application. Users will find it easier for them to create and enhance their
apps with VIA VAB-630 mainboard.
The VIA VAB-630 provides an impressive selection of rear I/O in a compact form factor including HDMI®
port, two USB 2.0 ports, DC-in jack and 10/100Mbps Ethernet port. Customers can take advantage of VIA’s
industry leading hardware and software support to create customized designs with a quick time to market.
The VIA VAB-630 is also available with board support packages (BSP) for Android operating systems.
1.1. Key Features
• Powered by 1.0GHz VIA Cortex-A9 dual-core SoC
• Supports independent, integrated graphic processing (GPU) for 3D/2D and graphic acceleration
• Supports HDMI port, 10/100Mbps Ethernet port and Audio jack
• Supports one single-channel 18/24 bit LVDS connector
• Supports both 3G and Wi-Fi + Bluetooth module connection
• Supports 10 GPIO with 3.3V power
• Supports power by DC-in or battery mode
• Android 5.0 operating system
• Fanless and ultra-low power consumption
• 4GB onboard eMMC Flash memory
• Flawless HD video performance up to 1080p
• Supports Micro USB 2.0 OTG.
• Android solution pack available
• Optional 12V (default) or 5V power input
VAB-630 User Manual
2
1.2. Product Specifications
Processor
o 1.0GHz VIA Cortex-A9 dual-core SoC
System Memory
o 1GB DDR3 SDRAM onboard
Storage
o 4GB eMMC Flash memory
Boot Loader
o 512KB SPI Flash ROM
Graphics
o Mali-400 SP GPU
• 2-integrated, independent 3D/2D graphics processing units
• Graphic engine supporting OpenGL
®
ES 2.0 hardware acceleration
• Conditional supports MPEG-2 and H.264 video decoding up to 1080p
LAN
o ASIC AX88772CLF
Audio
o VIA VT1603A I2S Audio Codec
HDMI
o Integrated HDMI 1.4 Transmitter
Onboard I/O
o 1 x USB 2.0 connector
o 1 x Single-channel 18/24 bit LVDS panel connector
o 1 x I2C touch connector
o 1 x UART (console port connector)
o 1 x RTC battery connector
o 1 x Reset connector
o 1 x miniPCle slot
o 1 x SIM card slot
o 1 x Battery connector
Front Panel I/O
o 1 x Micro SD card slot
o 1 x Micro USB 2.0 OTG port
o 1 x Power button
o 1 x DIO port supports 10 GPIO with 3.3V power
o 1 x Power LED
o 2 x Audio jacks (Line-out and Mic-in)
VAB-630 User Manual
3
Back Panel I/O
o 1 x HDMI port
o 2 x USB 2.0 ports
o 1 x COM port for RS-232 (TX/RX)
o 1 x 10/100Mbps Ethernet port
o 1 x DC in-jack
Power Supply
o 12V DC-in (5V DC-in optional)
Operating Temperature
o 0°C ~ 60°C
Operating Humidity
o 0% ~ 95% @ 40°C (non-condensing)
Operating System
o Android 5.0
Form Factor
o
3.5 inch SBC
o
14.6cm x 10.2cm (146mm x 102mm)
Compliance
o
CE, FCC
Notes:
1. As the operating temperature provided in the specifications is a result of the test performed in VIA’s
chamber, a number of variables can influence this result. Please note that the working temperature may vary
depending on the actual situation and environment. It is highly suggested to execute a solid testing program
and take all the variables into consideration when building the system. Please ensure that the system runs
well under the operating temperature in terms of application.
2. Please note that the lifespan of the onboard eMMC memory chip may vary depending on the amount of
access. More frequent and larger data access on eMMC memory makes its lifespan shorter. Therefore, it is
highly recommended to use a replaceable external storage (e.g., Micro SD card) for large data access.
VAB-630 User Manual
4
1.3. Layout Diagram
OPEN
LOCK
VAB - 630
UART
miniPCIe
External I/O
SIM Card slot
USB 2.0
Reset
RTC battery connector
Battery connector
eMMC
1.0GHz VIA Cortex-A9
dual-core SoC
External I/O
DDR3 SDRAM
Figure 1: Layout diagram of the VAB-630 (top view)
LVDS
I C touch
2
Figure 2: Layout diagram of the VAB-630 (bottom view)
Loading...