Page 1
March 21, 2018 Version 1.01
Operating Guide
EPIA-P710 Mainboard
Page 2
EPIA-P710 Operating Guide
March 21, 2018 - i - Version 1.01
Table of Contents
Table of Contents .................................................................................................................. i
VIA EPIA-P710 Overview ....................................................................................................... 2
Layout Diagrams .................................................................................................................. 3
EPIA-P710 (top and bottom views) ...................................................................................... 3
P710-A (top and bottom views) ........................................................................................... 5
P710-B (top and bottom views) ........................................................................................... 7
VIA EPIA-P710 Specifications ................................................................................................. 8
VIA EPIA-P710 Processor SKU ................................................................................................ 9
VIA EPIA-P710 Dimensions & Mounting Holes ........................................................................ 10
P710-A I/O Board Dimensions .............................................................................................. 11
P710-B LAN Module Dimensions ........................................................................................... 12
Power Consumption ............................................................................................................ 13
Tested Configurations ...................................................................................................... 13
Configuration 1 ............................................................................................................ 13
Configuration 2 ............................................................................................................ 13
Configuration 3 ............................................................................................................ 13
Configuration 4 ............................................................................................................ 13
Configuration 5 ............................................................................................................ 13
Configuration 6 ............................................................................................................ 13
Boot to Idle .................................................................................................................... 14
3DMark2001 SE .............................................................................................................. 14
Power Specifications ........................................................................................................... 15
VIA EPIA-P710 Microsoft and Linux Driver Support ................................................................. 16
Microsoft Driver Support................................................................................................... 16
Linux Driver Support ........................................................................................................ 16
Contact ............................................................................................................................. 17
Page 3
EPIA-P710 Operating Guide
March 21, 2018 - 2 - Version 1.01
VIA EPIA-P710 Overview
The VIA EPIA-P710 Pico-ITXe mainboard is an ultra compact native x86 platform for a wide range
of embedded system applications. The mainboard is based on the VIA VX800 All-in-One System
Processor featuring the VIA C-9 HC3 DX9 IGP with video accelerators for rich digital media
performance.
The VIA EPIA-P710 onboard VIA C7 NanoBGA2 processor is a powerful, secure, and efficient
processor with its included VIA Padlock Security Engine, VIA CoolStream™ Architecture, VIA
StepAhead™ Technology Suite, and VIA TwinTurbo™ technology.
The VIA EPIA-P710 delivers the performance levels with its included sizeable support of up to 2 GB
of 667 MHz DDR2 memory and native support for SATA 3Gb/s storage devices. In addition to
EPIA-P710 is highly extensible. Its SUMIT interface enables it to easily configure certain IO ports.
The VIA EPIA-P710 is fully compatible with Microsoft® and Linux operating systems.
Page 4
EPIA-P710 Operating Guide
March 21, 2018 - 3 - Version 1.01
Layout Diagrams
EPIA-P710 (
TOP AND BOTTOM VIEWS
)
Item Function
J1 GigaLAN pin header connector
J2 Front panel pin header
J3 Front audio pin header
J4 VGA pin header
J5 Clear CMOS jumper
J6 LVDS power
Selector
J7 DC-In power connector
CN1 LVDS connector
CN2 SUMIT QMS connector (Bank B)
CN3 SUMIT QMS connector (Bank A)
IDE1 IDE pin header
SATA1
Serial ATA connector
FAN1 CPU Fan connector
Page 5
EPIA-P710 Operating Guide
March 21, 2018 - 4 - Version 1.01
Item Function
J8 PS/2
KBMS connector
CN4 Memo
ry slot (DDR2 SODIMM)
CN5 SATA power connector
BAT1 CMOS Battery connector
Page 6
EPIA-P710 Operating Guide
March 21, 2018 - 5 - Version 1.01
P710-A (
TOP AND BOTTOM VIEWS
)
Item Function
J1 LPC pin header
J2 USB port
J3 USB port
J4 COM Port pin header
J6 SPI connector
PCIE1 PCIe 1
-
Lane socket
PCIE2 PCI
e 4-Lane slot
PCIE3 PCIe 1
-
Lane slot
Page 7
EPIA-P710 Operating Guide
March 21, 2018 - 6 - Version 1.01
Item Function
CN3 SUMIT QFS connector (Bank B)
CN4 SUMIT QFS connector (Bank A)
Page 8
EPIA-P710 Operating Guide
March 21, 2018 - 7 - Version 1.01
P710-B (
TOP AND BOTTOM VIEWS
)
Page 9
EPIA-P710 Operating Guide
March 21, 2018 - 8 - Version 1.01
VIA EPIA-P710 Specifications1
Model Name EPIA-P710-10
Processor VIA C7 1 GHz NanoBGA2 processor
Chipset VIA VX800 All-in-One System Processor
System Memory - 1 x DDR2 533/667 SODIMM slot
- Up to 2 GB memory size
VGA - VIA C-9 HC3 DX9 Integrated Graphics with MPEG-2 accelerators
Onboard Storage - 1 x UltraDMA 133/100/66/33 connector
- 1 x SATA 3Gb/s connector and SATA power connector (5V)
Onboard LAN - 1 x VIA VT6122 PCI Gigabit Ethernet Controller2
Onboard Audio - VIA VT1708B High Definition audio codec
Onboard I/O Connectors - 2 x SUMIT QMS connectors3
- 1 x Gigabit LAN pin header
- 1 x Audio pin connector for Line-out, Line-in, and MIC-in
- 1 x Single-channel LVDS connector (5V/3V)
- 1 x CPU fan connector
- 1 x VGA pin header
- 1 x PS/2 KBMS connector
- 1 x Front panel pin header
- 1 x +12V DC-in 2-pin connector
BIOS - Award BIOS
- 4/8 Mbit flash memory
Operating System Windows XP, Linux, Win CE/XPe
System Monitoring &
Management
- Wake-on LAN and keyboard
- System power management, AC Power failure recovery
Operating Temperature
0°C ~ 50°C
Operating Humidity
0% ~ 95% (relati
ve humidity; non
-
condensing)
Form Factor - Pico-ITXe
- 1
0 cm x
7.2 cm
1
Specifications subject to change without notice.
2
The EPIA-P710-B LAN port accessory board is highly recommended to maintain the LAN performance.
3
SUMIT interface supports up to three USB 2.0, one LPC, two x1 PCIe, one x4 PCIe, SMBus, and SPI interfaces.
Page 10
EPIA-P710 Operating Guide
March 21, 2018 - 9 - Version 1.01
VIA EPIA-P710 Processor SKU
The VIA EPIA-P710 Pico-ITXe mainboard is available in the following speed grades:
• 1.0 GHz VIA C7 NanoBGA2 Processor
Page 11
EPIA-P710 Operating Guide
March 21, 2018 - 10 - Version 1.01
VIA EPIA-P710 Dimensions & Mounting Holes
Page 12
EPIA-P710 Operating Guide
March 21, 2018 - 11 - Version 1.01
P710-A I/O Board Dimensions
Page 13
EPIA-P710 Operating Guide
March 21, 2018 - 12 - Version 1.01
P710-B LAN Module Dimensions
Page 14
EPIA-P710 Operating Guide
March 21, 2018 - 13 - Version 1.01
Power Consumption
Power consumption tests were performed on eight different configurations. The following tables
show the mainboard’s voltage, amp and wattage values while running common applications in the
Windows XP environment.
T
ESTED CONFIGURATIONS
Configuration 1
• VIA C7 1 GHz NanoBGA2 Processor
• IBM DARA-206000, 6 GB, ATA-66, 4200 RPM, 2.5" hard drive
• Onboard power supply +5V
Configuration 2
• VIA C7 1 GHz NanoBGA2 Processor
• Seagate ST940210AS, 40 GB, SATA 1.5 Gb/s, 5400 RPM, 2.5" hard drive
• Onboard power supply +5V
Configuration 3
• VIA C7 1 GHz NanoBGA2 Processor
• Seagate ST940210AS, 40 GB, SATA 1.5 Gb/s, 5400 RPM, 2.5" hard drive
• IBM DARA-206000, 6 GB, ATA-66, 4200 RPM, 2.5" hard drive
• Boot from SATA
• Onboard power supply +5V
Configuration 4
• VIA Eden ULV 500 MHz NanoBGA2 Processor
• IBM DARA-206000, 6 GB, ATA-66, 4200 RPM, 2.5" hard drive
• Onboard power supply +5V
Configuration 5
• VIA Eden ULV 500 MHz NanoBGA2 Processor
• Seagate ST940210AS, 40 GB, SATA 1.5 Gb/s, 5400 RPM, 2.5" hard drive
• Onboard power supply +5V
Configuration 6
• VIA Eden ULV 500 MHz NanoBGA2 Processor
• Seagate ST940210AS, 40 GB, SATA 1.5 Gb/s, 5400 RPM, 2.5" hard drive
• IBM DARA-206000, 6 GB, ATA-66, 4200 RPM, 2.5" hard drive
• Boot from SATA
• Onboard power supply +5V
Page 15
EPIA-P710 Operating Guide
March 21, 2018 - 14 - Version 1.01
B
OOT TO IDLE
Measured Voltage Measure Amp Watts
Configuration 1 11.65 0.986 11.487
Configuration 2 11.60 1.092 12.667
Configuration 3 11.60 1.147 13.305
Configuration 4 11.56 1.151 13.306
Configuration 5 11.63 1.267 14.735
Configuration 6 11.65 1.284 14.959
3DM
ARK
2001 SE
Measured Voltage
Measure Amp
Watts
Configura
tion 1
11.65
1.501
17.487
Configuration 2 11.60 1.595 18.502
Configuration 3 11.60 1.666 19.326
Configuration 4 11.56 1.307 15.109
Configuration 5 11.63 1.377 16.015
Configuration 6 11.65 1.561 18.186
Page 16
EPIA-P710 Operating Guide
March 21, 2018 - 15 - Version 1.01
Power Specifications
The VIA EPIA-P710 Pico-ITXe mainboard utilizes a +12V DC-in power connector for providing
power to the mainboard. The dimensions of the DC-in port are show in the figure below.
Figure 1: DC-in dimensions
Page 17
EPIA-P710 Operating Guide
March 21, 2018 - 16 - Version 1.01
VIA EPIA-P710 Microsoft and Linux Driver Support
M
ICROSOFT DRIVER SUPPORT
The VIA EPIA-P710 Pico-ITXe mainboard is compatible with Microsoft operating systems. The latest
Windows Windows 2000 and Windows XP drivers can be downloaded from the VEPD website at
www.viaembedded.com.
For embedded operating systems (Windows XP Embedded), the related drivers can be found in the
VIA Arena website at www.viaarena.com.
L
INUX DRIVER SUPPORT
The VIA EPIA-P710 Pico-ITXe mainboard is highly compatible with many Linux distributions.
Support and drivers are provided through various methods including:
• Drivers provided by VIA
• Using a driver built into a distribution package
• Visiting VIA Arena website at www.viaarena.com for latest updates on a monthly basis
• Installing a third party driver (such as the ALSA driver from the Advanced Linux Sound
Architecture project for integrated audio)
For OEM clients and system integrators developing a product for long term production, other code
and resources may also be made available. You can submit a request either through the
Developers portal at VIA Arena, or through your VEPD support contact. Alternatively, VIA can work
further towards providing additional drivers to fit your specific needs.
Page 18
EPIA-P710 Operating Guide
March 21, 2018 - 17 - Version 1.01
Contact
For more information on the VIA EPIA-P710 Pico-ITXe mainboard contact your sales representative
or visit our website at www.viaembedded.com.
A
MERICA
USA
940 Mission Court
Fremont, CA 94539
Tel: (510) 683 3300
Fax: (510) 687 4654
Email: vpsd_sales@viatech.com
E
UROPE
GERMANY
Mottmann Strasse 12
53842 Troisdorf-Oberlar
Tel: 2241 397780
Fax: 2241 3977819
Email: sales@via-tech.de
A
SIA
TAIWAN
1F, No. 531, Zhong zheng Road,
Xindian District, New Taipei City 231,
Tel: (02) 2218 5452
Fax: (02) 2218 5453
Email: mkt@via.com.tw
CHINA
6F, Dascom Tower
9 Shangdi East Road
Haidian District
Beijing, 100085
Tel: 10 6296 3088
Fax: 10 6297 2929
Email: vpsdbj@viatech.com.cn
Loading...