VIA Technologies EPIA-PE Operating Manual

Operating Guide
EPIA-PE Mini-ITX Mainboard
January 15, 2007 Version 1.01
EPIA-PE Operating Guide
Table of Contents
VIA EPIA-PE 10000 .................................................................................................................................................................... 9
MICROSOFT DRIVER SUPPORT...................................................................................................................................................... 12
LINUX DRIVER SUPPORT .............................................................................................................................................................. 12
January 15, 2007 - i - Version 1.01
EPIA-PE Operating Guide
VIA EPIA-PE Overview
The VIA EPIA-PE Mini-ITX Mainboard is an ultra compact native x86 platform optimized for today's demanding embedded and productivity applications. The mainboard is based on the VIA C3 EBGA processor featuring an embedded hardware MPEG-2 video decoding accelerator. Its integrated VIA UniChrome™ AGP graphics provide rich digital media performance. With the sizable memory bandwidth of DDR 266MHz DIMM and the high data transfer speeds of ATA-133 and further enhanced by support of 2-Channel AC’97 Codec, the VIA EPIA-PE delivers the increased performance levels required by today’s embedded digital media applications.
The latest in high-bandwidth connectivity features four USB 2.0 ports (and the ability to support up to 2 more USB ports using the available onboard pin headers), one COM port (and three COM pin headers), one FIR pin header, and two 10/100 Base-TX Ethernet port for extended broadband connectivity. The VIA EPIA-PE also has one PCI slot for expandability options. The VIA EPIA-PE is compatible with a full range of Mini-ITX chassis as well as FlexATX and MicroATX enclosures and power supplies.
The VIA EPIA-PE is fully compatible with Microsoft® and Linux operating systems and is available in a variety of configurations.
January 15, 2007 - 1 - Version 1.01
EPIA-PE Operating Guide
VIA EPIA-PE Layout
January 15, 2007 - 2 - Version 1.01
EPIA-PE Operating Guide
VIA EPIA-PE Specifications
Model Name - EPIA PE10000 Processor - VIA C3 EBGA 1.0GHz Processor Chipset - VIA CLE266 North Bridge
- VT8235M South Bridge
System Memory - 1 DDR266 DIMM socket
- Up to 1GB Memory Size
VGA - Integrated VIA UniChromeTM AGP graphics with MPEG-2 Decoding
Acceleration
Expansion Slots - 1 PCI Slot Onboard IDE - 2 UltraDMA 133/100/66 Pin Connectors Onboard LAN - VIA VT6103 10/100 Base-TX Ethernet PHY
- VIA VT6106S 10/100Mbps Fast Ethernet Controller
Onboard Audio - VIA VT1612A
2-Channel AC’97 Codec
Onboard I/O Connectors
Back Panel I/O - 1 PS2 mouse port
BIOS - Award BIOS, LPC 4/8Mbit flash memory Operating System - Windows 2000/XP, Linux, Win CE, XPe System Monitoring & Management
Operating Temperature Operating Humidity - 0% ~ 95% (relative humidity; non-condensing) Form Factor - Mini-ITX (6 layers)
* The specification is subject to change without prior notice.
- 1 USB pin connector for 2 additional USB 2.0 ports
- 1 Digital I/O pin connector
- 1 SM bus pin connector
- 1 Wake-On-LAN (WOL) pin connector
- 1 Front-panel audio pin connector for MIC-in and Line-out
- 3 Serial port pin connectors for COM2/3/4 (COM3/4 are 5V/12V selectable)
- 1 CIR pin connector (switchable for KB/MS)
- 1 FIR pin connector
- 3 Fan pin connectors for CPU, Power and System fans
- 1 LVDS module connector (an add-on card is required)
- ATX Power Connector
- 1 PS2 keyboard port
- 1 Parallel port
- 1 Serial port
- 1 VGA port
- 2 RJ-45 LAN ports
- 4 USB 2.0 ports
- 3 Audio jacks: Line-Out, Line-In and Mic-In
- CPU temperature reading, CPU voltage monitoring
- Wake-on-LAN, Keyboard-Power-on, Timer-Power-on, Watch Dog Timer, Fan control
- System power management, AC power failure recovery
- 0 ~ 50
- 17cm x 17cm
January 15, 2007 - 3 - Version 1.01
Loading...
+ 10 hidden pages