VIA Technologies EPIAML8000A - C3 DDR266 6CH Dolby 5.1, EPIA-ML8000A - VIA Motherboard - Mini ITX, EPIA ML-Series Operating Manual

Operating Guide
EPIA ML-Series Mini-ITX Mainboard
January 04, 2005 Version 1.3
EPIA ML-Series Operating Guide
Table of Contents
VIA EPIA ML 8000A................................................................................................................................................................. 10
VIA EPIA ML 5000EA ..............................................................................................................................................................11
MICROSOFT DRIVER SUPPORT...................................................................................................................................................... 14
LINUX DRIVER SUPPORT..............................................................................................................................................................14
January 04, 2005 - i - Version 1.3
EPIA ML-Series Operating Guide
VIA EPIA ML-Series Overview
The VIA EPIA ML-Series Mini-ITX Mainboard is an ultra compact native x86 platform optimized for today's demanding embedded and productivity applications. The mainboard is based on the VIA CLE266 chipset featuring an embedded hardware MPEG-2 accelerator and integrated VIA UniChrome™ 2D/3D graphics for rich digital media performance. With the sizable memory bandwidth of DDR266 SDRAM DIMM and the high data transfer speeds of ATA-133 and further enhanced by support of 6-Channel AC’97 codec for Smart 5.1 surround sound, the VIA EPIA ML-Series delivers the increased performance levels required by today’s embedded digital media applications.
The latest in high-bandwidth connectivity is supported with four USB 2.0 ports, as well as one Parallel port, two COM ports and 10/100 Fast Ethernet port for extended broadband connectivity. The VIA EPIA ML-Series also has one PCI slot for expandability options. The VIA EPIA ML-Series is compatible with a full range of Mini-ITX chassis as well as FlexATX and MicroATX enclosures and power supplies.
The VIA EPIA ML-Series is fully compatible with Microsoft® and Linux operating systems and is available in a variety of configurations, including the fanless VIA Eden™ ESP processor for silent system designs and the highly efficient VIA C3™ processor for more demanding multimedia applications.
January 04, 2005 - 1 - Version 1.3
EPIA ML-Series Operating Guide
VIA EPIA ML-Series Layout
January 04, 2005 - 2 - Version 1.3
EPIA ML-Series Operating Guide
VIA EPIA ML-Series Specifications
VIA EPIA ML Specifications
Processor - VIA C3™/ VIA Eden™ EBGA processor Chipset
System Memory VGA - Integrated VIA UniChrome AGP Graphics
Expansion Slots - 1 PCI Onboard IDE - 2 X UltraDMA 133/100/66 Connectors Onboard LAN - VIA VT6103 10/100 Base-T Ethernet PHY Onboard Audio - VIA VT1616 6 channel AC’97 Codec
Onboard I/O Connectors
Back Panel I/O
BIOS
System Monitoring & Management
Operating Temperature - 0 ~ 50°C Operating Humidity - 0% ~ 93% (relative humidity; non-condensing)
Form Factor
* The specification is subject to change without prior notice.
- VIA CLE266 North Bridge
- VIA VT8235 South Bridge
- 1 DDR266 DIMM socket
- Up to 1GB memory size
- 1 USB connector for 2 additional USB 2.0 ports
- Front-panel audio connectors (mic-in and line-out)
- 1 CD Audio-in connector
- 1 Buzzer
- FIR connector
- CIR connector (Switchable for KB/MS)
- Wake-on-LAN connector
- CPU/Sys FAN/Fan 3
- 1 SM Bus connector
- 1 Serial port connector for a second com port
- 1 PS2 mouse port
- 1 PS2 keyboard port
- 1 Parallel
- 1 RJ-45 LAN port
- 1 Serial port
- 2 USB 2.0 ports
- 1 VGA port
- 3 Audio jacks: line-out, line-in and mic-in (Smart 5.1 support)
- Award BIOS
- 2Mbit flash memory
- CPU voltage monitoring
- Wake-on-LAN, Keyboard Power-on, Timer Power-on
- System power management
- AC power failure recovery
- Mini-ITX (4 layer)
- 17 cm x 17 cm
January 04, 2005 - 3 - Version 1.3
EPIA ML-Series Operating Guide
VIA EPIA ML Processor SKUs
The VIA EPIA ML-Series is available in two different speed grades. The VIA EPIA ML5000EA utilizes VIA’s ultra low power VIA Eden™ ESP processor while the VIA EPIA ML8000A utilizes the robust VIA C3™ processor.
EPIA ML5000EA
VIA Eden™ ESP 5000 processor 533 MHz Fanless Operation
1.2v Operating Volts 128KB L1 Cache 64KB L2 Cache MMX and 3DNow!
Suitable for fanless systems with low heat and ultra low-power requirements
EPIA ML8000A
VIA C3™ processor 800 MHz
1.65v Operating Volts 128KB L1 Cache 64KB L2 Cache MMX and 3DNow!
Suitable for compact systems running multimedia applications
January 04, 2005 - 4 - Version 1.3
Loading...
+ 11 hidden pages