4x12 Guitar Speaker Cabinets
User Manual
VHT 412CEL and 412VHT
FEATURES
The VHT412CEL and 412VHT Rear Panel Jack Plate
The VHT 412CEL and 412VHT loudspeaker cabinets employ a vintage-style closed-back design that utilizes four 12-inch speakers internally wired for a total
impedance of 16 ohms. The cabinets are loaded with Celestion Vintage 30, or VHT ChromeBack, or VHT BlackBack 12-inch guitar speakers. For input and
output connection functions, the rear panel jack-plate has two standard ¼” jacks wired in parallel. Power handling capacity is 240 watts.
2
VHT412CEL
16Ω 240 Watts Max 16Ω
3
CABINET SETUP
Connect the VHT412CEL or 412VHT loudspeaker cabinet to your amplifier’s 16Ω speaker output jack. The loudspeaker cabinet’s rear-panel jacks are wired
in parallel, so you can connect your amplifier to either jack, and you can also use the remaining jack to connect to an additional speaker cabinet.
PROPER CABINET USE
The VHT 412CEL and 412VHT loudspeaker cabinets have four 12” speakers internally wired for a total impedance of 16 ohms. A single VHT
412CEL or 412VHT cabinet works best with a vacuum tube guitar amplifier that has a 16Ω speaker output jack or an impedance selector that
can be set for 16 ohms. Observe proper impedance matching when connecting multiple speaker cabinets, and always use your amplifier’s proper
speaker output jack or speaker impedance selector setting. (Two 16Ω cabinets connected in the conventional parallel manner combine for a total
impedance of 8 ohms. So when using two cabinets, use your amplifier’s 8Ω speaker output jack or set the speaker impedance selector to 8 ohms.)
Maximum power handling capacity is rated at 240 watts. Exceeding this rating can damage the speakers permanently, and this form of abuse is not
covered by the warranty.
Name/Model VHT 412CEL and 412VHT Cabinet / 412CEL and 412VHT
Speakers Four Celestion Vintage 30, or four VHT ChromeBack,
or four VHT BlackBack 12-inch guitar speakers.
Total impedance 16Ω, 240 watts maximum power rating.
Jacks Two parallel standard ¼” jacks.
Cabinet Vintage-style closed-back finger jointed birch plywood with steel handles and pop-out casters.
Cosmetics Black vinyl covering with black grille cloth.
Dimensions (W x H x D) 29” x 29” x 14”
(737mm x 737mm x 356mm)
Net Weight 85.5 lbs (38.8 kg)
TECHNICAL SPECIFICATIONS
4
5
Limited Warranty Information
This product is warranted, to the original purchaser, to be free from defects in material and workmanship for a period of five (5) years,
excluding the speakers, which are warranted for a period of ninety (90) days, from the original date of purchase.
The manufacturer shall, at its option, either repair or replace the defective product if the product is returned to the original place of purchase. If
any product returned is not defective within this warranty, the manufacturer shall so advise the Purchaser and thereafter shall dispose of said
product in accordance with the Purchaser’s instructions and at the Purchaser’s cost. This warranty is not transferable by the Purchaser.
The warranty shall not apply to wearable parts, these items include, but are not limited to, vinyl, feet, and handles.
The warranty shall not apply, if the product has been misused or damaged as a result of neglect, abuse, alteration, improper handling,
unauthorized repair or modification, accident or causes external to the product, such as, but not limited to, excessive heat or humidity.
The manufacturer’s sole and exclusive maximum liability for any claim by the Purchaser shall not exceed the wholesale value of the product. In
no event shall the manufacturer be liable for any indirect, incidental, collateral, exemplary, or consequential damages of losses arising out of
the Purchaser’s purchase of the product. The above limitations may not apply in some states (U.S.), international regions or countries.
VHT
AMPLIFICATION
MADE IN CHINA
Loading...