VHT 212HC User Manual

Handwired Cabinet

User Manual

212HC

FEATURES

The Back Plate

The VHT 212HC cabinet is capable of handling 60W (RMS) through the use of 2x12’’ Celestion G12H30 16 ohm speakers. It
also features closed back construction to complement tight low end as well as clean detailed performance.

2

3

CABINET SETUP

Connect the VHT 212HC cabinet to The Standard 18W or 36W Handwired Head with the included speaker cable. Simply plug
one end of this cable into the output jack of The Standard 18W or 36W Handwired Head, and the other end into the mono
input on the VHT 212HC cabinet.

PROPER CABINET USE

The VHT 212HC is designed best for use with The Standard 18W or 36W Handwired Head. If the VHT 212HC is used with
an amplifier other than The Standard 18W or 36W Handwired Head, then the power output rating of the amplifier MUST NOT
EXCEED 60W (RMS) and MUST HAVE AN 8-ohm OUTPUT IMPEDANCE. Please take caution of this notice. If these ratings
are not met, permanent damage may occur to your VHT 212HC cabinet as well as the connected amplifier.