
EXERCISE MONITOR USER INSTRUCTIONS
Your V-
fit
Exercise Monitor has been specially designed to help you plan and view your exercise performance.
EXERCISE MONITOR FUNCTIONS
V-
fit
Exercise Monitors have SOME or ALL the following functions: -
CALORIES ~ (COMPUTED THEORETICAL CALORIE BURN)
DISTANCE ~ (EXERCISE DISTANCE [miles/km])
SCAN ~ (CHANGING FROM FUNCTION TO FUNCTION)
SPEED ~ (CYCLE / TRAINING SPEED [mph/kmh]
TIMER ~ (COUNT UP [minutes and seconds])
MONITOR FUNCTION SPECIFICATIONS
0.00 - 999.9 Kcal (THEORETICAL)
SHOWS EACH FUNCTION EVERY 6 SECONDS
0.00 - 99.59 MINUTES (COUNT UP)
MONITOR OPERATING SPECIFICATIONS
NORMAL OPERATING TEMPERATURE
USING YOUR V-
fit
EXERCISE MONITOR
To provide ease of use, there is only 1 button on your V-
fit
Exercise Monitor: - MODE
Press the MODE button once to move onto the SCAN mode. The display will change EVERY 6 SECONDS to show each
function in turn.
To manually move through each of the Exercise Monitor's functions in turn, press the MODE button TWICE. The
Exercise Monitor's functions are in order: - TIME, SPEED, DISTANCE and CALORIES.
Pressing and holding the MODE button for more than 2 seconds when you are in each mode will enable you to set to zero
any previous figures remaining in each individual function.
Either press the MODE button or start to exercise and the Exercise Monitor will begin to register the various
functions.
BATTERY INSTALLATION
To fit the BATTERY to your V-
fit
Exercise Monitor, please remove the BATTERY COVER at the REAR of the monitor.
Carefully fit the battery supplied (and any subsequent new batteries) by fitting between the exposed contacts. Please
ensure that the battery is fitted with the '+' / '-' ends matching the outline on the sticker in the battery
compartment or etched into the compartment. Failure to fit the battery correctly may result in damage to your V-
fit
Exercise Monitor, which is not covered by our guarantee. Dispose of old batteries carefully.
Codes: - FC1 – FC1TA – AET1