Vezco PRO-NVR-Smart Quick Start Manual
Quick Start Guide
Quick Start Guide of PRO-NVR-Smart
1
Quick Start Guide
COPYRIGHT © VEZCO.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Vezco Technology or its subsidiaries (hereinafter referred to be “Vezco”).
This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior
written permission of Vezco. Unless otherwise stipulated, Vezco does not make any
warranties, guarantees or representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version in the company website
(http://www.vezcocctv.com).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Vezco’ trademarks and logos are the properties of Vezco in
various jurisdictions. Other trademarks and logos mentioned below are the properties of
their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”,
WITH ALL FAULTS AND ERRORS, AND VEZCO MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF
THIRD PARTY. IN NO EVENT WILL VEZCO, ITS DIRECTORS, OFFICERS, EMPLOYEES,
OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL,
OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION,OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
VEZCO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT
SHALL BE WHOLLY AT YOUR OWN RISKS. VEZCO SHALL NOT TAKE ANY
RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, VEZCO WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS
IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT
YOUR USE CONFORMS THE APPLICABLE LAW. VEZCO SHALL NOT BE LIABLE IN THE
EVENT THAT THIS PRODUCT IS USEDWITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATER PREVAILS.
Quick Start Guide of PRO-NVR-Smart
2
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated collection point. For
more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Quick Start Guide of PRO-NVR-Smart
3
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are
neglected.
Warnings
● Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
● In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 100~240 VAC, 110~220 VAC or 12 VDC according to the
IEC60950-1 standard. Please refer to technical specifications for detailed information.
● PoE ports do not comply with Limited Power Source. The additional equipment
connected to PoE ports shall have fire enclosure.
● Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket.
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the
power cord, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
• Ensure unit is installed in a well-ventilated, dust-free environment.
• Unit is designed for indoor use only.
• Keep all liquids away from the device.
• Ensure environmental conditions meet factory specifications.
• Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a
result of dropping it may cause damage to the sensitive electronics within the unit.
• Use the device in conjunction with an UPS if possible.
• Power down the unit before connecting and disconnecting accessories and
peripherals.
• A factory recommended HDD should be used for this device.
• Improper use or replacement of the battery may result in hazard of explosion. Replace
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
Quick Start Guide of PRO-NVR-Smart
4
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates a potentially hazardous situation, which if
not avoided, could result in equipment damage,
data loss, performance degradation, or unexpected
results.
Quick Start Guide of PRO-NVR-Smart
5
TABLE OF CONTENTS
About This Document ...................................................................................................................... 6
Overview .......................................................................................................................................... 6
NVR Pre-Installation ......................................................................................................................... 6
NVR Installation ................................................................................................................................ 6
Front Panel ....................................................................................................................................... 7
Rear Panel ........................................................................................................................................ 8
HDD Storage Calculation Chart ...................................................................................................... 9
Basic Hardware Connection ......................................................................................................... 10
Network Connection .................................................................................................................. 10
Output Connection .................................................................................................................... 10
Hard Disk Installation ................................................................................................................ 10
Peripheral Connections ............................................................................................................. 11
Wiring of Alarm Input ......................................................................................................... 11
Wiring of Alarm Output ....................................................................................................... 11
Using of Alarm Connectors ................................................................................................ 12
Power Connection..................................................................................................................... 12
Starting Up and Logging In To NVR .............................................................................................. 12
Startup ...................................................................................................................................... 12
Login ......................................................................................................................................... 12
Network Parameters Settings ....................................................................................................... 13
Managing Installed Hard Disks ..................................................................................................... 14
Accessing NVR via Web Client ..................................................................................................... 17
Quick Start ...................................................................................................................................... 20
Resource Management and Live View ..................................................................................... 20
Adding the Online Device .................................................................................................. 21
Adding Devices by IP Address ........................................................................................... 22
Adding the Camera via PoE Interface ................................................................................ 23
Local Storage ..................................................................................................................... 23
Live View ........................................................................................................................... 24
Recording Schedule Settings and Playback ............................................................................. 25
Recording Settings ............................................................................................................ 25
Playback ............................................................................................................................ 26
Searching Video Files for Playback ................................................................................... 26
Playing Video Files ............................................................................................................ 26
Event Configuration .................................................................................................................. 26
Configuring Motion Detection Event .................................................................................. 27
Configuring Motion Detection Alarm .................................................................................. 27
Checking Event Logs ......................................................................................................... 28
Shutting Down the NVR ................................................................................................................. 28
Quick Start Guide of PRO-NVR-Smart
6
About This Document
This guide is written for the NVR admin user. It briefly explains how to install your NVR as
well as how to configure some of its basic features. You can find the user manuals for
detailed instructions and configuration about NVR at www.vezcocctv.com.
Overview
NVR is an intelligent video management software station that comes preinstalled with an
operating system and outstanding VMS-VEZPRO, and can support up to 16 or 32 network
cameras. With flexible features and included storage space (optional), NVR offers you an
efficient and easy one-stop solution for video surveillance implementation, for applications
from a small retail store to a complex surveillance installation with multiple sites.
Note: The NVR station is dedicated to video surveillance, and we strongly recommend
that you do not install any other software or program on the station to insure its
performance and reliability.
NVR Pre-Installation
The NVR is highly advanced surveillance equipment that should be installed with care.
Please take into consideration the following precautionary steps before installation of the
NVR.
1. Keep all liquids away from the NVR.
2. Install the NVR in a well-ventilated and dust-free area.
3. Ensure environmental conditions meet factory specifications.
4. Install a manufacturer recommended HDD.
NVR Installation
During the installation of the NVR:
1. Use brackets for rack mounting.
2. Ensure there is ample room for audio and video cables.
3. When routing cables, ensure that the bend radius of the cables are no less than five
times than its diameter.
4. Connect both the alarm and RS-485 cable.
5. Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
6. Ensure the NVR is grounded.
7. Environmental temperature should be within the range of 0º C to +45º C, 32º F to 113º
F.
8. Environmental humidity should be within the range of 10% ~ 90%.
Quick Start Guide of PRO-NVR-Smart
7
Front Panel
No.
Name
Function Description
1
POWER
Power on/off switch.
2
Indicator
HDD
Flicker green/red when data is being read
from/written to HDD normally/abnormally.
Link
Steadily light when network connection is
functioning properly.
Turn off when NVR disconnects from network.
Tx/Rx
Flicker green when data is transmitted or received
via network properly.
Turn off when exception occurs during transmitting
or receiving data.
3
USB Interfaces
Universal Serial Bus (USB) ports for additional
devices such as USB mouse and USB Hard Disk
Drive (HDD).
Left: USB 2.0, Right: USB 2.0
Quick Start Guide of PRO-NVR-Smart
8
Rear Panel
No.
Item
Description
1
PoE Interface
Network interfaces for the cameras and to provide
power over Ethernet.
2
ALARM IN
Connector for alarm input.
ALARM OUT
Connector for alarm output.
3
LAN Interface
LAN network interfaces.
4
USB Interface
Universal Serial Bus (USB) ports for additional
devices such as USB mouse and USB Hard Disk
Drive (HDD).
Left: USB 3.0, Right: USB 2.0
5
HDMITM
HDMITM video output connector. The HDMI
TM
interfaces can also be used for video wall display.
6
RS-232 Interface
Connector for RS-232 devices.
7
VGA
Connector for VGA output. Display local video
output and menu.
8
AUDIO IN
RCA connector for audio input.
9
AUDIO OUT
RCA connector for audio output.
10
GND
Ground.
11
Power Supply
Power supply.
12
Power Switch
Power on/off switch.
Loading...