Vestil GCAB-4415-72 User Manual

Galvanized Storage Cabinet, Model GCAB-4415-72
g
Assembly Instructions
Identifier Item Description Quantity
I Shelf support 30
J
#8 10mm self-tapping screw
21
Product specifications:
Capacity per shelf = 66lbs (30kg) Dimensions = 72in. (H) x 44in. (W) x 15in. (D)
~(183cm x 112cm x 38cm) Overall wei
ht = 112lbs (~51kg)
Step 1: Insert the front leg assembly (E3) and rear leg assembly (F3) into the
J
J
R
bottom end (has flange with 2 holes for screws) of the left side panel (B7) and right side panel (B8) as shown in the diagram below. Fasten both leg assemblies to the panels with 10mm screws (J).
Step 3: Insert the center brace (G1) into the slot in the front leg assembly and secure it from the inside with a 10mm screw (shown in f irst frame of diagram below). Set the top panel (A4) in place on top of the cabinet and secure it to the side panels with 10mm screws (J). Brace the rear panels from the inside (e.g. with a portion of 2-by-4) to prevent the panel from warping, and then fasten the top panel to the rear panels with 10mm screws. Install shelf supports (I) in all 4 corners & on the divider (G1) at the same height to support each shelf; then install the shelves (D4) so that they rest on the supports.
ear view Front view
Shelf support (I)
Step 2: Install the left rear panel (C5) and then the right rear panel (C6)
[NOTE: C6 will overlap C5]; then fasten the rear panels together and to the side panels with 10mm screws (J).
Don’t install screws here until step 3
J
Front view
Step 4: Install the left door (L3) and right door (R3) by inserting the hinge pins mounted on the door panels into the hinge barrels mounted on the side panels.
Rear view
Hinge
Hinge pin
barrel
Loading...