Vestil EASY-A-xxxx User Manual

VESTIL MANUFACTURING CORPORATION

2999 North Wayne St., Angola, IN 46703 USA

Phone [phone] • Fax [phone]
E-mail: [e-mail] • www.vestil.com

Revised 06-04 32-126-101

A company dedicated to solving ergonomic and material
handling problems since 1955

.

Ergonomic Solutions

OWNERS
MANUAL

EASY ACCESS STEEL STOCK TRUCK

Series EASY-A

Contents

Assembly....................................................... 1 Parts List/Warranty ........................................ 2

ASSEMBLY AND USE INSTRUCTIONS

The model EASY-A Easy Access Steel Stock Truck is
intended to be used indoors for transporting miscellaneous
materials and containers from one area of a building to
another across a smooth, level, finished floor. Its maximum
total load capacity is 1,200 lbs. -- each shelf individually has

a maximum capacity of 660 lbs.

READ THROUGH ALL THE FOLLOWING STEPS BEFORE
PROCEEDING WITH THE ASSEMBLY!

1. Inspect all parts for damage and to be certain all the
required parts are included.
You should find:
(2) 1-1/4” X 5” poly-on-poly rigid casters and (2) 1-1/4” x 5”
poly-on-poly swivel casters;
(32) M8-1.25 hex head bolts, (32) M8 flat washers, (32)
M8-1.25 nuts;
(1) lower deck and (1) upper deck, (2) corner posts and (1)
end post, and (2) push handles

2. Except for the casters, leave all the hardware only
fingertight until the entire cart is assembled.

3. Locate the bottom deck (having four holes in each corner)
and position it so that the sides are pointing downward. For
use in typical loading applications, bolt on the swivel
casters at the end having two holes in each deck side (the
rear of the cart), and install the rigid casters on the
opposite and (the front side). If the cart will be used only
for light duty applications, the swivel casters can be

bolted to the holes in the front of the deck.
After verifying that the rigid casters are positioned
parallel to the deck sides, tighten
all the casters’ mounting hardware. Turn the
bottom deck over the rest on the casters.

4. Bolt on the corner uprights onto the bottom deck at the

rear end of the cart. Install the end upright at the front end
of the cart.

5. Bolt on the upper deck, positioned so that the sides are
pointing downward and with the holes in the deck sides
lined up with the holes in the three uprights.

6. Square the upper deck over the lower deck and adjust the
uprights so they are plumb and square. Wrench tighten all

of the hardware.

7. One push handle installs on each side of the swivel caster
end of the cart. The lower end of the handles will mate to
a hole drilled through the corner upright -- attach them with
the longest bolts. The upper end of each push handle bolts
through the upper deck using the 20 mm long bolts.

8. The optional tool box is mounted to the end of the upper
deck, on the push handle end of the cart, using M8-1.25
bolts, washers and nuts.

9. The optional basket can be either hung from the bottom
flange of the tool box or on bolts installed through the tool
box’s mounting holes.

Check the tightness of the hardware after one week of
use, and periodically thereafter.

TO PREVENT POSSIBLE INJURY AND/OR PROPERTY
DAMAGE

Caution

cart could overturn if a wheel stop suddenly (such as
due to hitting a foreign object on, or a crack in, the
floor) or if a corner is turned to quickly.
To prevent possible injury and/or property damage, do
not exceed the load ratings indicated above.
Do not transport loads which overhang the sides or end
of the cart.

: Items on the cart could tip and/or slide or the

EASY ACCESS STEEL STOCK TRUCK

Series EASY-A

1

PARTS IDENTIFICATION

EASY-ACCESS STEEL STOCK TRUCK • MODEL EASY-A-1836

ITEM NO.

1
2
3
4
5
6

7
8

9
10
11
12

13
14
15
16
17
18

DESCRIPTION

Swivel Caster
Rigid Caster
Caster Mount Bolt
Caster Mount Washer
Caster Nut
Front Leg

Top Deck
Lower Deck
Writing Table / Storage Box
Security Pen
Handle (Universal)
Top Handle Bolt

Lower Handle Bolt
Rear Leg Left Side
Rear Leg Right Side
Leg Mounting Bolt
Leg Mounting Washer
Leg Mounting Nut
Caster Kit (includes 4 casters & hardware)

model EASY-1836

EASY-1836-1
EASY-1836-2
EASY-1836-3
EASY-1836-4
EASY-1836-5
EASY-1836-6

EASY-1836-7
EASY-1836-8

EASY-1836-9
EASY-1836-10
EASY-1836-11
EASY-1836-12

EASY-1836-13
EASY-1836-14
EASY-1836-15
EASY-1836-16
EASY-1836-17
EASY-1836-18

EASY-KIT-1

model EASY-2436

EASY-2436-1
EASY-2436-2
EASY-2436-3
EASY-2436-4
EASY-2436-5
EASY-2436-6

EASY-2436-7
EASY-2436-8

EASY-2436-9
EASY-2436-10
EASY-2436-11
EASY-2436-12

EASY-2436-13
EASY-2436-14
EASY-2436-15
EASY-2436-16
EASY-2436-17
EASY-2436-18

EASY-KIT-1

LIMITED WARRANTY

ONE YEAR LIMITED WARRANTY. The manufacturer warrants for the original purchaser against defects in materials and
workmanship under normal use one year after date of purchase. (Not to exceed 15 months after date of manufacture.) Any part which
is determined by the manufacturer to be defective in material or workmanship and returned to the factory, shipping costs prepaid, will
be, as the exclusive remedy, repaired or replaced at our option. Labor costs for warranty repairs and/or modifications are not covered
unless done at manufacturer’s facilities. Any modifications performed without written approval of the manufacturer may void warranty.
This limited warranty gives purchaser specific legal rights which vary from state to state.

incidental damages is expressly disclaimed.
The manufacturer’s liability in any event is limited to, and shall not exceed, the purchase price paid. Misuse or modification may void
warranty.

however, such illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty that the
products are merchantable, or fit for a particular purpose, or that the products will necessarily conform to the illustrations or descriptions.

laws as enacted in the State of Indiana.

which proves to be defective within the Limited Warranty. Warranty claims must be made in writing within said year.

LIMITATION OF LIABILITY. To the extent allowable under applicable law, the manufacturer’s liability for consequential and

WARRANTY DISCLAIMER. Our company has made a diligent effort to illustrate and describe the products shown accurately;

The provisions of the warranty shall be construed and enforced in accordance with the UNIFORM COMMERCIAL CODE and

DISPOSITION. Our company will make a good faith effort for prompt correction or other adjustment with respect to any product

2