Vestil CYL-EH-FP, CYL-EH-FP-FF, CYL-EH-FF, CYL-EH User Manual

rev. 4/2/2014 CYL-EH, manual.doc

Vestil Manufacturing Co.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339

www.vestilmfg.com e-mail: sales@vestil.com

CYL-EH, CYL-EH-FF, CYL-EH-FP, & CYL-EH-FP-FF Cylinder Dollies

Instruction Manual

After delivery, immediately remove the packaging from the product in a manner that preserves the packaging and maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it sustained damage during transport. If damage is discovered during the inspection, immediately record a complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used is exclusively the responsibility of the owner/end-user.

2) Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) the instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil responsible for any consequential damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining this product.

Table of Contents

Product Specifications……………………………………..…………………………………………………………….. 2 Hazard Identification: Explanation of Signal Words….……………………………………………………………….. 2 Safety Guidelines…………………………………………………………………………..…………………….………. 2 FIG. 1: CYL-EH exploded parts diagram & bill of materials…………………………………………………………. 3 FIG. 2: CYL-EH-FF exploded parts diagram & bill of materials…………………………………………………….. 4 FIG. 3: CYL-EH-FP exploded parts diagram & bill of materials…………………………………………………….. 5 FIG. 4: CYL-EH-FP-FF exploded parts diagram & bill of materials…………………………………………………. 6 Use Instructions…………………………………………………………………………………………………………... 7 Inspections & Maintenance……………………………………………………………………………………………… 8 Label Placement Diagram……...……………………………………………………………………………………….. 8 Limited Warranty…...…………………………………………………………………………………………………….. 9

rev. 4/2/2014 CYL-EH, manual.doc

PRODUCT SPECIFICATIONS

Dimensions and other product specifications of standard wrapping machine models appear in the following

tables:

Model Wheel type

Cutting

torch box

CYL-EH Pneumatic NO YES NO NO 33¼ x 231/16 x 661/2

CYL-EH-FF Foam-filled NO YES NO NO 35¼ x 231/16 x 661/2

Lifting

eye

Fork

pockets

Fire

protection

Overall

dimensions

Net weight

120 lb.

54.5 kg 120 lb.

54.5 kg

HAZARD IDENTIFICATION: explanation of signal words

This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to uses of the product likely cause property damage.

The signal words used in this manual appear below along with the meaning of each word:

Identifies a hazardous situation which, if not avoided, WILL result in DEATH or

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or

Identifies practices likely to result in product/property damage, such as operation

Each person who assembles, installs, uses, or maintains this product should read the entire manual and fully understand the directions in advance. If after reading the manual you do not understand an instruction, ask your supervisor or employer for clarification, because failure to adhere to the directions in this manual might result in serious personal injury.

SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.

SERIOUS INJURY.

MODERATE injury.

that might damage the product.

SAFETY GUIDELINES

Vestil diligently strives to identify foreseeable hazards associated with the use of its products. However, no manual can identify every possible injury causing scenario. The end-user ultimately is responsible for exercising sound judgment at all times.

Failure to read and understand the entire manual before assembling, installing, using or

servicing the product constitutes misuse. Read the manual to refresh your understanding of proper use and

maintenance procedures. If this product is used improperly or carelessly, the operator and/or bystanders might sustain serious personal injuries or could even be killed.

 DO NOT exceed the maximum rated load.  Inspect the dolly before each use. Remove the dolly from service if the inspection reveals damage such as: 1)

cracked welds; 2) corrosion, extreme wear, or other condition that affects the ability of the product to support cylinders; 3) significantly worn or damaged wheels; 4) missing ratchet straps. DO NOT use the product until it is restored to normal condition. ONLY use manufacturer-approved replacement parts.

 DO NOT use the dolly to transport any cylinder that does not seat securely in the brackets.  DO NOT transport a cylinder without firmly applying the ratchet straps.  ALWAYS apply safe lifting practices whenever the dolly is connected to a lifting device (e.g. overhead hoist)  When transporting the dolly up-or-downhill, always remain uphill of the dolly.  DO NOT remove or obscure any label. All product labels must be readable and undamaged.  DO NOT modify the dolly in any way. Unauthorized modifications automatically void the limited warranty

(see p. 7) and might make it unsafe to use.

Proper use, maintenance, and storage are essential for this product to function properly. Keep

the product clean & dry.

rev. 4/2/2014 CYL-EH, manual.doc

FIG. 1: CYL-EH Exploded Parts Diagram and Bill of Materials

Item no. Part no. Description Quantity

1 16-514-195 Weldment, frame, subassembly 1 2 33-112-032 Pin, axle 1 3 07-025-005 Handle, black rubber, 6in. 2 4 16-132-126 Pneumatic tire, 4in. x 16in. 2 5 65078 Cotter pin zinc-plated,

/8 in. x 11/2 in. 2 6 11067 HHCS #2 zinc-plated, 5/16 in. - 18 x 31/2 in. 4 7 33006 5/16 in. USS flat washer zinc-plated 4 8 36104 Hex nut zinc-plated, 5/16 in. - 18 4 9 16-145-018 2in. x 36in. strap with ratchet 4

+ 6 hidden pages