Vestil CART-550-AS User Manual

Instruction Manual

For Auto Shift Hydraulic Lift Table
Model Number: CART-550-AS

Note: Owner/Operator must read and understand this Instruction

Manual before operating the lift & tilt table.

Contents

WARNING

1

CAUTION

2

NAME OF PARTS

3

4 HOW TO ASSEMBLE 4

5 DAILY INSPECTION 6

OPERATING LIFTTABLE

6

7 SERVICE INSTRUCTION 7

8 HYDRAULIC CIRCULT 7

9 SPARE PARTS LIST 8

2

2

3

6

10 TROUBLES SHOOTING

10

1

Operation and Service Manual

READ THIS MANUAL CAREFULLY AND BE SURE TO UNDERSTAND ALL THE INSTRUCTIONS BEFORE

OPERATING THE LIFT TABLE. KEEP THIS MANUAL ON FILE FOR FUTURE REFERENCE AND IF LOST, PLEASE

CONTACT YOUR LOCAL SUPPLIER FOR A NEW COPY. IF THE WARNING/CAUTION DECAL ON THE UNIT IS

WORN, TORN OR LOST, PLEASE CONTACT YOUR LOCAL SUPPLIER FOR A NEW DECAL.

NOTE: For this manual, WARNING means that there may be a condition where danger is present that could lead to

death or serious injury. CAUTION means there is a condition present that can lead to injury or property damage.

1. WARNING

1. Keep hands and feet clear of the scissors mechanism.

2. DO NOT allow personnel to stand in front of or behind the lift table when it is moving.

3. DO NOT move the lift table when it is in a raised position. The load could become unbalanced and fall.

4. Personnel should never be positioned under the table.

5. DO NOT overload the lift table.

6. Keep your feet clear of the rolling wheels. Injury could result.

7. Ensure that the floor is level and flat when moving the lift table. The load could fall if the floor is not level.

8. DO NOT use the lift table on sloped or inclined surfaces, as the lift table may become erratic and pose danger.

9. DO NOT use the lift table to elevate personnel. This could result in severe injury.

2. CAUTION

1. Before operating the lift table, ensure that you read this operation manual carefully and understand its

instructions completely. Improper operation could result in injury or property damage.

2. This lift table is a movable lifter designed to elevate or lower a rated load onto a table or flat surface. DO NOT

use the lift table for anything other than its intended purpose.

3. DO NOT allow personnel to operate the lift table who are not qualified or familiar with the equipment.

4. DO NOT lower the table too fast. This could unsettle the load and fall, causing injury or property damage.

5. Pay attention to the stability of the load. Do not operate the lift table if load becomes unstable.

6. Ensure that the lift table is braked when sliding a load on or off a table or flat surface.

7. All loads must be distributed evenly on at least 80% of the table area. DO NOT set loads to the side or ends of

the lift table surface.

8. DO NOT use the lift table if a load is unstable, unbalanced or loosely stacked.

9. Observe regular maintenance work according to the service manual instructions.

10. It is prohibited to modify the lift table without the manufacturer’s written consent. Modifying the lift table without

the manufacturer’s consent will void the warranty.

11. When servicing the lift table, remove any loads and use the safety stopper to prevent the table from

accidentally lowering.

12. Only use the lift table under dry conditions. This lift table is not designed to be water resistant.

2

3. NAME OF PARTS

4. Assembly Instructions

Ensure that the “Lift Table” is sufficiently secured before beginning to assemble.

A spanner tool and caliper are required when assembling the lift table. Clamping tools, such as

monkey wrenches can also be used.

Locate these parts for assembly Correctly assembled

4.1 Secure the handle on the chassis using two bolts as well as the flat washers and spring washer.

3