Vestil CART-600-S-HR, CART-300-S-HR, CART-1000-S-HR, CART-400-D-HR Instruction Manual

INSTRUCTION MANUAL

FOR PREMIUM SCISSOR LIFT CARTS

MODELS COVERED: CART-300-S-HR,

CART-600-S-HR, , CART-1000-S-HR, CART-400-D-HR

- 1 -

Content

1. Warning………………………………………………….3

2. Caution…………………………………………………..4

3. Name of parts…………………………………………...5

4. Daily inspection…………………………………………6

5. Operating lifttable……………………………………… 6~7

6. Specifications……………………………………………8

7. Service instruction………………………………………8~9

8. Hydraulic Circuit…………………………………………9

9. Exploded view & part

list……………………………….10~19

- 2 -

BEFORE OPERATING THE LIFT TABLE, READ THIS MANUAL
CAREFULLY AND UNDERSTAND COMPLETELY. KEEP THIS MANUAL
ON FILE FOR FUTURE REFERENCE. IF THIS IS LOST, PLEASE
CONTACT YOUR LOCAL SUPPLIER FOR A NEW COPY. ALSO, IF THE
WARNING/CAUTION DECAL ON THE UNIT IS LOST, PLEASE
CONTACT YOUR LOCAL SUPPLIER FOR A NEW DECAL.

NOTE

: On this manual, WARNING means the danger which can lead to

death or serious injury. CAUTION means the danger which can lead to
slight injury or property damage.

1. WARNING

1.DO NOT put foot or hand in scissors mechanism.

2.DO NOT allow other person to stand in front of or behind lift table when it is

moving.

3.DO NOT move lift table when table is in raised position. Load could fall down.

4.DO NOT enter under table.

5.DO NOT overload lift table.

6.DO NOT put foot in front of rolling wheels. Injury could result.

7.WATCH difference and hardness of floor level when moving lift table. Load could

fall down.

8.DO NOT use lift table on slope or inclined surface, lift table may become uncontrollable

and create danger.

9.DO NOT lift people. People could fall down and suffer severe injury.

- 3 -

2. CAUTION

1.Read this operation manual carefully and understand completely operating lift

table. Improper operation could create danger.

2.This lift table is a movable lifter designed to lift or lower rated load on table. NO

NOT use lift table for other purpose than its intended use.

3.DO NOT allow person to operate lift table who does not understand its operation.

4.DO NOT lower table too fast. Load could fall down and create danger.

5.KEEP watching the condition of load. Stop operating lift table if load becomes

unstable.

6.Byake lift table when sliding load on or off table.

7.DO NOT side or end load. Load must be distributed on at least 80%of table area.

8.DO NOT use lift table with unstable, unbalanced loosely stacked load.

9.Practice maintenance work according to service instructions.

10. DO NOT modify lift table without manufacturers written consent.

11. REMOVE load from table and use safety stopper to prevent table from lowering

when servicing lift table.

12. This lift table is not designed to be water resistant. Use lift table under dry

condition.

- 4 -

3. NAME OF PARTS

CART-300/600/1000-S-HR

- 5 -

4. DAILY INSPECTION

Daily inspection is effective to find the malfunction or fault on lift table. Check lift table

on the following points before operation.

CAUTION

DO NOT use lift table if any malfunction or fault is found.

(1) Check for scratch, bending or cracking on the lift table.

(2) Check if there is any oil leakage from the cylinder.

(3) Check the vertical creep of the table.

(4) Check the smooth movement of the wheel.

(5) Check the function of brake.

(6) Check if all the bolt and nuts are tightened firmly.

5. OPERATING LIFTTABLE

5-1. How to use the brake.

CAUTION

Brake lift table when not moving it in order to prevent sudden movement.

The brake is equipped with the swivel caster on the right side.

(1) Braking the wheel, press the brake pedal.

(2) Releasing the brake, lift up the brake pedal.

- 6 -