Vestil BWK 352-A User Manual

SAFETY DATA SHEET

BOARDWALK DUST MOP TREATMENT 20N18 BWK352A

Version 2.3 Revision Date 12/22/2016 Print Date 03/21/2017

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Material name : Boardwalk Dust Mop Treatment BWK352A
Material number : 1041289 / A06412

Manufacturer or supplier's details

Company : Boardwalk / Essendant Co.
Address : One Parkway North

Deerfield, IL 60015

Telephone : [phone]

Emergency telephone numbers
For SDS Information : 844-828-5617
For a Medical Emergency :
For a Transportation
Emergency

: Chemtel: 1(800)255-3924

Recommended use of the chemical and restrictions on use

Recommended use : Floor Care

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

Appearance Aerosol containing a liquefied gas
Colour white
Odour characteristic

GHS Classification

Gases under pressure : Liquefied gas
Skin irritation : Category 2

GHS label elements

Hazard pictograms :

Signal word : Warning
Hazard statements : H280 Contains gas under pressure; may explode if heated.

H315 Causes skin irritation.

Precautionary statements :

Prevention:
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves.

Response:

P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P332 + P313 If skin irritation occurs: Get medical advice/
attention.

1 / 11

SAFETY DATA SHEET

BOARDWALK DUST MOP TREATMENT 20N18 BWK352A

Version 2.3 Revision Date 12/22/2016 Print Date 03/21/2017

P362 Take off contaminated clothing and wash before reuse.
Storage:
P410 + P403 Protect from sunlight. Store in a well-ventilated
place.
Disposal:
Dispose of contents/container in accordance with local
regulation.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance / Mixture : Mixture

Hazardous components

Chemical name CAS-No. Concentration [%]
Distillates (petroleum), hydrotreated heavy

naphthenic
Distillates (petroleum), hydrotreated light 64742-47-8 >= 5 - < 10
Solvent naphtha (petroleum), heavy aliph. 64742-96-7 >= 5 - < 10
butane 106-97-8 >= 5 - < 10
Naphtha (petroleum), hydrotreated light 64742-49-0 >= 5 - < 10
propane 74-98-6 >= 1 - < 5
The exact percentages of disclosed substances are withheld as trade secrets.

64742-52-5 >= 10 - < 20

SECTION 4. FIRST AID MEASURES

General advice : Show this safety data sheet to the doctor in attendance.

Do not leave the victim unattended.
Move out of dangerous area.

If inhaled : If unconscious place in recovery position and seek medical

advice.
If symptoms persist, call a physician.

In case of skin contact : If skin irritation persists, call a physician.

Wash off immediately with plenty of water for at least 15
minutes.
If on clothes, remove clothes.

In case of eye contact : Flush eyes with water as a precaution.

Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
Rinse immediately with plenty of water for at least 15 minutes.

If swallowed : Clean mouth with water and drink afterwards plenty of water.

Keep respiratory tract clear.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.

Most important symptoms
and effects, both acute and
delayed

: Effects are immediate and delayed.

Symptoms may include irritation, redness, pain, and rash.
Causes skin irritation.
Review section 2 of SDS to see all potential hazards.

2 / 11

SAFETY DATA SHEET

BOARDWALK DUST MOP TREATMENT 20N18 BWK352A

Version 2.3 Revision Date 12/22/2016 Print Date 03/21/2017

Notes to physician : Treat symptomatically. Symptoms may be delayed.

SECTION 5. FIREFIGHTING MEASURES

Suitable extinguishing media : Alcohol-resistant foam

Carbon dioxide (CO2)
Dry chemical
Water spray jet

Unsuitable extinguishing
media

Specific hazards during
firefighting

Hazardous co mbustion
products

Specific extinguishing
methods

Further information : Standard procedure for chemical fires.
Special pr otective equipment

for firefighters

: High volume water jet

: Do not allow run-off from fire fighting to enter drains or water

courses.

: Carbon dioxide (CO2)

Carbon monoxide
Smoke

: Use extinguishing measures that are appropriate to local

circumstances and the surrounding environment.

: Wear self-contained breathing apparatus for firefighting if

necessary.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions,
protective equipment and
emergency procedures

Environmental precautions : Prevent further leakage or spillage if safe to do so.

Methods and materials for
containment and cleaning up

SECTION 7. HANDLING AND STORAGE

Advice on safe handling : Avoid contact with skin and eyes.

: Use personal protective equipment .

Evacuate personnel to safe areas.
Ensure adequate ventilation.
Remove all sources of ignition.
Beware of v apours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.

Prevent product from entering drains.
If the produc t contaminat es rivers and lakes or drains inform
respective authorities.

: Soak up with inert absorbent material (e.g. sand, silica gel,

acid binder, universal binder, sawdust).
Sweep up or v acuum up spillage and collect in suitable
container for disposal.

For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.

3 / 11

SAFETY DATA SHEET

y

g

BOARDWALK DUST MOP TREATMENT 20N18 BWK352A

Version 2.3 Revision Date 12/22/2016 Print Date 03/21/2017

Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Open drum carefully as content may be under pressure.
Always replace cap after use.
Dispose of rinse water in accordance with local and national
regulations.
Do not breathe vapours or spray mist.

Conditions for safe storage : BEWARE: Aerosol is pressurized. Keep away from direct sun

exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Keep in a dry, cool and well-ventilated place.

Materials to avoid : Oxidizing agents

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters

Components CAS-No. Value type

(Form of
exposure)

Distillates (petroleum),
h

drotreated heavy naphthenic

TWA

Distillates (petroleum),
hydrotreated light
TWA 400 ppm

TWA (Mist) 5 mg/m3 OSHA Z-1
TWA (Mist) 5 mg/m3 OSHA P0
TWA (Mist) 5 mg/m3 NIOSH REL
ST (Mist) 10 mg/m3 NIOSH REL
PEL

butane 106-97-8 TWA 800 ppm
TWA 800 ppm
PEL 800 ppm
propane 74-98-6 TWA 1,000 ppm ACGIH

TWA 1,000 ppm
TWA 1,000 ppm
TWA 1,000 ppm OSHA P0

64742-52-5 TWA (Mist) 5 mg/m3 OSHA Z-1

(Inhalable
fraction)

64742-47-8 TWA 500 ppm

(particulate)

Control
parameters /
Permissible
concentration

5 mg/m3 ACGIH

2,000 mg/m3
1,600 mg/m3

5 mg/m3 CAL PEL

1,900 mg/m3
1,900 mg/m3
1,900 mg/m3

1,800 m
1,800 mg/m3

/m3

Basis

OSHA Z-1
OSHA P0

NIOSH REL
OSHA P0
CAL PEL

NIOSH REL
OSHA Z-1

4 / 11