USS OBSERVER CHRONO
SEC
MIN
WARRANTY
Your VESTAL limited warranty covers defects in materials and workmanship
for a period of three years from the date of purchase. The warranty does not
cover the watch case, battery, strap, bracelet, crystal and crown. Damage
resulting from improper use, accidents, and normal wear and tear is not
covered. Water damage is not covered unless the watch is marked 10 atm
water resistant. VESTAL's warranty is void if the product is disassembled in
any manner by any party other than a certified watch repair professional.
If you live in North America and the watch is defective, please call (949)
631-7036 or email warranty@vestalwatch.com for a Return Authorization
(RA) number. Watches sent back to us without a Return Authorization (RA)
number will not receive service and will be shipped back at owner’s expense.
RETURN ADDRESS: Vestal Watch
ATTN: RA # __________
730 West 17th Street
Costa Mesa, CA 92627
CARING FOR YOUR WATCH BAND
If your watch band is made of leather, try to avoid getting it wet. Water will ruin
the leather. In the event that the leather band needs to be replaced, VESTAL
has a limited supply of replacements that can be sold back to you.
To keep the integrity of the exclusive design of your Vestal watch, we do not
switch bands on watches for other material types or colors. If your VESTAL
watch is equipped with a stainless steel band and it has been exposed to salt
water, rinse band in fresh water soon after exposure.
In most cases, if you watch stops then it is time for battery replacement.
Contact a certified watch repair specialist to have them install a new battery.
Always request the watch repair specialist to lubricate and reseal case back
and crown to ensure original water resistance is maintained.
A quick reference guide to help you understand the water resistance ratings
for watches and the various activities you can expose your watch to without
water damage is below. Watches, no matter what the water resistance is,
should not be worn in any hot tub, hot shower, sauna or steam room.
3 ATM = Splash Resistant
Suitable for a light rain or drizzle.
5 ATM = Water Resistant
Suitable for a rain, water balloon fight, or wading in a pool.
10 ATM =Water Sports Worthy
Suitable for swimming, surfing, diving up to 100 meters.
30 ATM=Submarine Worthy
Suitable for extreme depths of up to 300 meters.
DISPLAY AND CROWN/BUTTON OPERATION
Stopwatch minute hand
(move in minute increments)
Hour hand
Minute hand
Button (A)
*In stopwatch function Start/Stop
Crown at extended position
*Time setting
Button (B)
*In stopwatch function Split/Split release/Reset
Date window
Stopwatch second hand
(Move in second increments)
Second hand
* The measured time is indicated by the stopwatch hands that move independently of the
counter hands.
60
1545
30
MIN
SEC
60
1050
2040
30
15
Crown at normal position
Crown at DATE setting
position
ADJUSTING THE STOPWATCH HAND POSITION
Before setting the time, check if the Stopwatch 1/10 second, second and minute hands are
at the “0” (12 o’clock) position. If the stopwatch is in use, press the button in the following order
to reset it, and then check if the hands return to “0” position. For detail see “HOW TO USE
STOPWATCH”.
If the stopwatch is counting: (A) ----------> (B)
If the stopwatch is stopped: (B)
If the split time is displayed: (C) ----------> (A) ------------> (B)
*If either of the stopwatch hands are not at the “0” position, reset them following the procedure below:
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
1. Pull out the crown to time
setting position, second
click.
2. Press Button (A) or (B) to reset the
stopwatch second and minute hands to “0”
position.
*By pressing Button (A), set the stopwatch
second hand.
*By pressing Button (B), set the stopwatch
minute hand.
*The stopwatch minute hand moves
correspondingly with the stopwatch second
hand.
*The hands move quickly if the respective
buttons are kept pressed.
3. Push the crown back to the
normal position.
Crown
Stopwatch second hand
Stopwatch minuet
hand
TIME SETTING
* Before setting the time, check that the chronograph measurement is stopped.
1. Pull out the crown when the
to the date setting position.
Second click
2. Turn the crown clockwise
until the previous days date
appears.
3. pull out the crown to the
second click when the second
hand is at the 12 o’clock
position. it will stop on the
spot and advance the hour
and minute hands by turning
the crown.
(check that AM/PM is set
correctly.)
4. Push the crown back in to
the normal position in
accordance with the signal.
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
Crown
* Do not set the date between 9:00 P.M. and 1:00A.M.
otherwise, the day may not change properly. If it is necessary to set the date during that time period, first change
the time to any time outside it, set the date and then reset the correct time.
HOW TO USE THE STOPWATCH
* The measured time is indicated by the stopwatch hands that move independently of the center hands.
* The stopwatch can measure up to 60 minutes in 1/10 seconds
Example: 100m race (Press the buttons in the following order: (A) ----------> (A) ------------> (B)
Standard Measurement
Example: Basketball game (Press the button in the following order:
2 minutes, 50 seconds 15 minutes, 10 8/10 seconds
Example: 5,000m race (Press the buttons in the following order: (A) ----------> (B)/(B) ------------> (A) ------------> (B)
* Restart and stop of the stopwatch can be repeated as many times as necessary by pressing button (A).
* Measurement and release of the split time can be repeated as many times as necessary by pressing button (B).
Accumulated elapsed time measurement
Split time measurement
Start ---------------------------------------------------> Stop (Finish) ----------------------------------> Reset (Reset to “0’0”)
(Start of game) --------------------------> (Time out/Restart game) ------------------------------> (Game over) -------------------------------------------------> (Reset)
(Start ) ---------------------------------------> (Split/Split Release) ------------------------------------------> (Stop) -----------------------------------------------------> (Reset)
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
60
1545
30
MIN
SEC
60
1050
2040
30
15
Loading...