Vessel F-6RL-E, F-6R, F-6RST-E Instruction Manual
17
Instruction Manual
Thank you for purchasing our Stat Clean No. F-6R.
Read this instruction manual before use. Keep it in a safe handy place for future reference.
Table of Contents
■For Your Safety ·························· P.2
■Product Features ························ P.3
■Production Specifications ············· P.4
■External View····························· P.5
■Performance ······························ P.6
■Installation ································ P.6
■Before Use ································ P.8
■Operation ·································· P.9
■Maintenance ······························ P.10
■Troubleshooting ························· P.14
■Storage ···································· P.15
■Warranty ································· P.16
18
For Your Safety
Safety Precautions
●Carefully read these Safety Precautions before use. Observe the precautions indicated herein to
ensure safety.
●Safety precautions in this instruction manual are categorized into two types by the degree of
danger associated with each of the followings. Based on danger analyses performed by Vessel,
all recautions in this instruction manual are of the CAUTION level.
●If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
WARNING
Indicates that improper handling can lead to serious injury or even
death.
CAUTION
Indicates that improper handling can lead to minor injury and property
damage.
This symbol indicates a WARNING or CAUTION.
This symbol indicates a prohibited action.
This symbol indicates a mandatory required action
CAUTIONS
PROHIBITED
Do not use F-6R in environments that require explosion - proofing.F6R is not of explosion-proof construction, therefore explosion or fire
may occur.
PROHIBITED
Do not use F-6R in flammable atmospheres. The corona discharge
can act as an ignition source and cause an explosion or fire.
PROHIBITED
Do not use F-6R in environments subjected to sharp temperature
fluctuations or dewing. This kind of environment can lead to
breakdown.
DO NOT WET
Do not use F-6R in highly damp places or anywhere it may be wet by
water, oil, solvent or other liquid. Contact with moisture can result in
electric shock or breakdown.
PROHIBITED
Do not use F-6R for anything other than static erasure or dust
removal.
PROHIBITED
Do not use F-6R with power supplies of ratings not specified in the
specifications. Inappropriate power supplies can result in fire and
electric shock.
PROHIBITED
Do not install, use or service F-6R until having understood the
information in this instruction manual.
REMEMBER
Keep this instruction manual in a safe handy place for future
reference.
CAUTION
VESSEL assumes no responsibility whatsoever for consequences
arising from the use of this product.
19
Product Features
■AC-TYPE CORONA DISCHARGE
This static eraser works by AC corona discharge, therefore longer interbal of ion balance
calibration is needed and ion balance is harder to disturbe by accumulating dust on the electrode
needle.
This static eraser outputs high frequency voltage, therefore ion loss caused by ion recombination
is low and ion can effectively be generated.
■SMALL FAN-TYPE STATIC ERASER
Built-in compact DC fan generates powerful airflow.
Fan speed can be switched to HIGH / LOW.
The components are compactly assembled in the body to make the unit smaller.
The input power is DC 24V. Use AC adaptor included.
A filter that can be removed and cleaned is provided as standard equipment.
F-6RCL-E comes with a clip for easy attachment to cell-production stands or workbenches.
F-6RST-E comes with a stand for easy installation to workbenches or machinery.
■DESIGNED FOR SAFETY
To prevent electrical shock, the circuit is cut off and the power turned off when the front guard is
opened.
During operation, the interior high-brightness white LED lights up and the operating condition can
be visually checked. (LED Lamp Function)
The red LED indicators on the top of the unit notify you in case of fan motor stoppage and
abnormally high voltage.
High-voltage transformer has the function of reducing out put in case of short circuit and
overloaded power.
■MAINTENANCE
Louver with electrode needles can be easily detached by removing the stopper, which improves
the efficiency of maintenance.
High-brightness LED makes it easy to check for dirt on the electrode needles visually.
■EMI COUNTERMEASURES
Low noise emission, avoids affect on other electronic devices.
■CE MARKING
In the production and inspection of CE directed Model. F-6R Static Eraser has been tested and
satisfied with its basic requirement according to the instructions of CE.
Application
Use to prevent trouble and dust adhesion caused by static electricity.
20
Product Specifications
Eraser
Model
: No.F-6R ( F-6RST-E with Stand / F-6RCL-E with Clip )
Ion generation method
: High voltage AC corona discharge
Output voltage
: AC 3.5 kＶ
Input voltage
: DC 24 V ± 5 % 210 ｍA ( typ.)
Dimensions
: H 131 x W 77 x D 81 mm (not including stand nor clip )
Weight
: F-6ST-E 470 g F-6CL-E 524 g
Wind speed
: HI 1.07m/s LO 0.50m/s （Measured at 300mm）
Noise emission
: HI 58.5 dB(A) LO 39.5 dB (A) （Measured at 1m）
Ozone generation
: 0.05ppm or less (Measured at 50mm）
Indicator lamp
: Operation Lamp (White LED, Illuminating combined)
High voltage alarm (Red LED), stop due to fan lock（Red LED）
Safety function
: Fan motor rotation monitoring function (Detecting rotation lock)
: High-voltage output shut down function（overload detection）
: Front cover safety device (circuit cut off when open)
Protective function
: Over current protection fuse (1.0 A)
Reverse-current connector protection diode ( 60 V / 1 A )
Working
temperature/humidity
: 5～40℃ / 35～65% RH ( No dewing or freezing )
Storage
temperature/humidity
: 0～60℃ / 35～85% RH ( No dewing or freezing )
Distance from target area
: 150～600 mm ( Installation location: Non-dangerous indoor
location)
Static electricity removal
time
: Refer to the items in the capabilities chart.
Ion balance
: Within ±10V ( At 300mm)
Material
: Casing ... ABS, Louver…PC, Stand...Stainless, Clip…Steel,
Electrode…Inconel
Accessories
Adapter No.AD24-ITF6
Rated input voltage
：AC 100 V – 240 V ( 50 / 60 Hz ) 0.4A
Rated output voltage
：DC 24 V 0.75 A
Working temperature
/humidity
：0~40℃ 10~85%RH（No dewing or freezing )
Cable length
：DC output cable:1.8 m , AC input cable:1.8m
Weight
：135g
21
External View
External View
AD24-ITF6
Loading...