Vessel Ion Bazooka BBZ-E, BBZ-E Instruction Manuals
your solution partner Instruction Manual
Thank you for purchasing our Stat Clean No. BBZ-E.
Read this instruction manual before use. Keep it in a safe handy place for future reference.
Table of Contents
■For Your Safety·······························P.2
■Product Features ···························P.3
■Production Specifications·············P.4
■External View··································P.5
■Performance ···································P.6
■Installation ······································P.7
■Operation ········································P.8
■Maintenance ···································P.10
■Troubleshooting ·····························P.13
■Storage············································P.14
■
W
arranty··········································P.16
■For Your Safety
Safety Precautions
●Carefully read these Safety Precautions before use. Observe the precautions indicated herein to
ensure safety.
●Safety precautions in this instruction manual are categorized into two types by the degree of
danger associated with each on the followings. Based on danger analyses performed by Vessel,
all precautions in this instruction manual are of the CAUTION level.
●If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
WARNING
Indicates that improper handling can lead to serious injury or even death.
CAUTION
Indicates that improper handling can lead to minor injury and property
damage.
This symbol indicates a WARNING or CAUTION.
This symbol indicates a prohibited action.
This symbol indicates a mandatory required action
CAUTIONS
ROHIBITED
Do not use BBZ-E in environments that require explosion-proofing. BBZ-E
is not of explosion-proof construction, therefore explosion or fire may
occur.
ROHIBITED
Do not use BBZ-E in flammable atmospheres. The corona discharge can
act as an ignition source and cause an explosion or fire.
ROHIBITED
Do not use BBZ-E in environments subjected to sharp temperature
fluctuations or dewing. This kind of environment can lead to breakdown.
DO NOT WET
Do not use BBZ-E in highly damp places or anywhere it may be wet by
water, oil, solvent or other liquid. Contact with moisture can result in
electric shock or breakdown.
PROHIBITED
Do not use BBZ-E for anything other than static erasure or dust removal.
PROHIBITED
Do not use BBZ-E with power supplies of ratings not specified in the
specifications. Inappropriate power supplies can result in fire and electric
shock.
PROHIBITED
Do not install, use or service BBZ-E until having understood the
information in this instruction manual.
REMEMBER
Keep this instruction manual in a safe handy place for future reference.
CAUTION
Vessel assumes no responsibility whatsoever for consequences arising
from the use of this product.
PROHIBITED
Never look Into high luminance light beam with your naked eye.
2
3
■Product Features
Special Features
The BBZ-E is the high-performance ionizer that is focused on the noise reduction, the expansion of
the static eliminating area and the durability.
* Corona Discharge AC type
AC corona discharge performance won't dirt the needle nor the Ion balance off.
High frequency voltage transformer produces ion in its high performance without ion re-uniting loss.
* Silent Nozzle
The BBZ-E is an e
xcellent noise reduction model. It is about 10 db lower noise compared to
conventional model with the standard nozzle.
* High Luminance LED Beam Built-in
This high luminance LED beam makes it easy to check fine dusts stained on the surface of the articles.
* LED Display
Both sides of Handle Grip display "ON" LED and "ALARM" LED for clear checking by left or right handed.
･Working "ON" display :Working "ON" Green LED at Power Switch
･High Voltage Warning :RED H.V. LED blinks when High Voltage Alarming is found in the power
supply and output shuts down by the built-in transformer.
* Compact and Light Weight
High Voltage power supply cable is not necessary. High Frequency Voltage Transformer is built in for
safety, this compact design secures high performance of using this gun pin-pointedly over the required
spot. Power source should be DC24 Voltage. Supply to this main body should be given by attached
power supply adapter.
* Long power cable
The attached power adapter has a 5m cable. Good handleability.
* Maintenance
Replacement of the electrode could be easily done with Electrode needle replacement
screwdriver (separately sold).
* Environmentally Friendly
Compliant with RoHS standards.
* EMI Countermeasures
Lower noise performance won't merely influence other electronic devices.
* CE Compliance
The BBZ-E has been tested and approved under CE directive, EN61000--6-4, 6-2.
Uses
Use the BBZ-E to blow away stubborn dust that adheres because of static electricity or to remove
static electricity as a preventative measure against dust accumulation.
4
■Product Specifications
Ion Bazooka Static Eraser Gun
Model
：No. BBZ-E
Ion generation method
：High voltage AC corona discharge
Impressed voltage
：about AC2.0kV
Input voltage
：DC24V ±5%
Power consumption
：74mA (TYP．)
Dimensions
：W132 x H152 x D36(mm)
Weight
：198g
Air consumption
：0.1~0.6MPa
Air consumption
：194L/min (at 0.3MPa)
Ozone generation
：0.05ppm or less (Measured at 50mm)
Warning output
：High voltage alarm (Red LED)
Protective function
：High-voltage output shut down function (overload detection）
Working ambient
temperature / humidity
：5~40˚C 35～65%RH (No dewing)
Distance from target area
：50 mm ~ （Installation location: Non-dangerous indoor location）
Static electricity removal time
：Refer to the items in the capabilities chart.
Ion balance
：Within±10V (At 0.3MPa and 150mm)
Material
Casing：ABS
Hook：SUS
Electrode Needle Pole：Tungsten
Accessories
：Instruction Manual、AC Adapter
AC Adapter No.AD24-ITB-E
Rated input voltage
：AC100V-240V(50/60Hz) 0.4A（TYP.）
Rated output voltage
：DC24V 0.75A
Working ambient
temperature / humidity
：0～40℃ 5～95%RH（No dewing）
Cable length
：DC output cable: 5 m , AC input cable:1.8m
Weight
：240g (without AC input cable)
*The measurement values were obtained using the VESSEL measurement environment, so error could
be induced depending on the operation environment.
External View
No.BBZ-E
No.AD24-ITB-E
5
Performance
EFFICIENCY DATA
Air Pressure (MPa) 0.1 0.2 0.3 0.4 0.5 0.6
Air consumption (L/min) 84 140 194 236 298 344
Ion Balance (V) -2.1 -2.3 -2.1 -1.8 -2.1 -1.4
+ Decay Time (s) 1.5 0.9 0.7 0.6 0.6 0.6
- Decay Time (s) 1.6 0.9 0.7 0.6 0.6 0.5
Noise (dB) 65.2 72.4 77.3 80.5 83.2 85.5
*The measurement values were obtained using the VESSEL measurement environment, so error
could be induced depending on the operation environment.
*The values of Ion balance and decay time are measured at 150mm distance from the nozzle to
Charge plate monitor
*Noise is measured at 1m distance from the nozzle.
Installation
CAUTIONS IN INSTALLATION
REMEMBER
Use only the included power supply adapter. Use of other adapters may results
in fire, electric shock and static electricity removal trouble.
REMEMBER
Uses an air hose of sufficient withstand pressure performance.
Air hoses of insufficient withstand pressure will rupture and leak air.
REMEMBER
Please connect the plug to the power outlet with a ground terminal.
Using the BBZ-E ungrounded runs the risk of electric shock.
REMEMBER
Install the BBZ-E in the below environment.
Adverse environments cause product deterioration and breakdown.
Humidity: 20~80%RH (No dewing) Temperature: 0~50˚C
PROHIBITED
Do not use the BBZ-E in the below environments. Adverse environments
cause product deterioration and breakdown, as well as personal accidents.
Where explosion-proofing is required, where found flammable atmospheres,
high temperature and high humidity, or sharp temperature fluctuations, where
dewing occurs, where possibly wet by water, oil or solvent
PROHIBITED
Do not pull excessively on the tube. Abusive handling can damage the gun and
internally disconnect the power cable and air hose.
6
Loading...