Page 1
MPUIQ-VMCHS ModUle
Quick Installation Guide
590-1543-501A 1
The MPUIQ-VMCHS module is
designed to drastically reduce
cable bulk. Use your MPUIQVMCHS module to convert
keyboard, monitor and mouse
signals from a server through a
single user-supplied CAT5 cable
(4-pair, up to 150 ft/45 m) to your
switch.
The MPUIQ-VMCHS module draws
its power from the server and has
Keep Alive functionality that will
keep your server working properly
with or without connectivity to the
Avocent® MergePoint Unity™
switch.
Troubleshooting tip
Make sure your server is turned
on before operating your MergePoint Unity™ switching system.
If a server is unavailable through
the MergePoint Unity™ local port
user interface, then double-check
your module connection or test
another MPUIQ-VMCHS module in
its place.
1. Connecting the MPUIQVMCHS module to your
unit
Choose an available port on the
rear of your switch. Plug one
end of a user-supplied CAT5
cable into a numbered port and
the other end into the RJ45
connector of the MPUIQVMCHS module.
2. Connecting a server to
the MPUIQ-VMCHS
module
Plug the MPUIQ-VMCHS
module, VGA monitor and USB
connectors into the appropriate
server ports. Repeat this step
for all servers that are to be
connected to the MergePoint
Unity™ switch.
3. Turning on your system
Turn on your servers and
MergePoint Unity™ switch.
Ensure that your switch is
properly configured and begin
operation of your system.
Avocent® MergePoint Unity™ 8032 Switch Shown
MPUIQ-VMCHS module
Server
Page 2
To contact Vertiv Technical Support: visit VertivCo.com
© 2017 Verti v Co. All rights res erved. Vertiv an d the Vertiv logo are tra demarks or regis tered trademar ks of Vert iv Co. All other nam es and logos refe rred to are trade nam es, trademarks
or regis tered trademar ks of their respec tive owners. Whi le every precau tion has been take n to ensure accurac y and completen ess herein, Verti v Co. assumes no r esponsibili ty, and
disclaims all liab ility, for damage s resulting from us e of this informatio n or for any errors or o missions. Sp ecification s are subject to cha nge without noti ce.
MPUIQ-VMCHS ModUle
Quick Installation Guide
2 590-1543-501A
USA Notification
War ning: Changes or
modifications to this unit not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
nOTE : This equipment has been
tested and found to comply with
the limits for a Class A digital
device, pursuant to Part 15 of the
FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference when the equipment
is operated in a commercial
environment. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instruction manual, may
cause harmful interference to radio
communications. Operation of this
equipment in a residential area is
likely to cause harmful interference
in which case the user will be
required to correct the interference
at his own expense.
Canadian Notification
This Class A digital apparatus
complies with the Canadian
ICES-003.
Cet appareil numérique de la classe
A est conforme à la norme
NMB-003 du Canada.
Japanese Notification
Korean Notification
European Union
War ning: This is a class A
product. In a domestic environment
this product may cause radio
interference in which case the user
may be required to take adequate
measures.
Safety, EMC and
Environmental Approvals
and Markings
Safety certifications and EMC
certifications for this product are
obtained under one or more of the
following designations: CMN
(Certification Model Number), MPN
(Manufacturer’s Part Number) or
Sales Level Model designation.
Designations that are referenced in
the EMC and/or safety reports and
certificates are printed on the label
applied to this product.
For use with Listed Information
Technology Equipment (I.T.E.).
KCC-REM-AVO-CMN1005-014
AVOCENT CORP.
RIP/CMN:1005-014
Loading...